Promax PROLITE-55 User manual
1
1 Introduction
The three-wavelength laser
source offers excellent stability, portability and
facile adjustments for accurate optical fiber
testing. Single output connector serves three
wavelengths, 1310nm,1490nm & 1550nm.
PROLITE-
PROLITE- can be used to test single mode
optical fiber of long distance and local network.
Also it can work with optical power meter to
measure the loss of optical fiber.
55
55
PROLITE-55
AUTO-OFF
270Hz
1kHz
2kHz
8.8.8.8
1310
nm
SINGLE
TWIN
TWIN
CW/Hz
ON
OFF
2 Safety Information
SAFETY RULES
The safety could not be assured if the instructions for use are not closely followed.
Class II supply line with the
corresponding ground terminal
Overvoltage Category I Pollution Degree 1
INDOOR
specified
specified ratings
specified environmental conditions
The user is not allowed to carry
cleaning instructions
The external DC charger is a equipment, for safety reasons plug it to a
.
Use the mains adapter in and installations. To use
.
When using some of the following accessories use only the ones to ensure safety:
Power adapter
Observe all both of supply and measurement.
Use this instrument under the .
out the following maintenance operations:
Any change on the equipment must be carried out exclusively by technical staff.
Follow the described in the Maintenance paragraph.
.
2
PROLITE-55
PROLITE-55
3
Symbols related with safety:
Never look directly into optical outputs or a fiber while the
equipment is on.
Invisible laser beam may damage your eyes.
The use of devices that are not specified by this manual
and the internal manipulation of the instrument may
cause harmful radiation.
Use the laser source output with caution.
Specific Precautions for PROLITE-55
Keep closed the cover of this output when not using it.
The laser source output emits light at 1310 nm, 1490 nm
and 1550 nm wavelength and 0 dBm power.
Low voltage installations isolated from themains.
Portable domestic installations.
Fixed domestic installations.
Industrial installations.
Descriptive Examples of Over-Voltage Categories
Cat I
Cat II
Cat III
Cat IV
LASER PRODUCT
CLASS 1
DIRECT CURRENT
ALTERNATING CURRENT
DIRECT AND ALTERNATING
GROUND TERMINAL
PROTECTIVE CONDUCTOR
FRAME TERMINAL
EQUIPOTENTIALITY
ON (Supply)
OFF (Supply)
DOUBLE INSULATION
(Class II protection)
CAUTION
(Risk of electric shock)
CAUTION REFER TO MANUAL
FUSE
EQUIPMENT OR COMPONENT
TO BE RECYCLED
3 Preparing for Operation
3.1 Unpacking the instrument
Packing material
Checking the package contents
We suggest that you keep the original packing material. Using the original packing
material is your guarantee of protecting the instrument during transit.
The standard accessories of are as follows:PROLITE-55
4
Main unit
DC 6V Adapter
2 rechargeables AA batteries
Carrying Case
User's Guide
Checking for damage in transit
After unpacking the instrument, check to see whether it was damaged in transit.
This is particularly likely if the outer casing is clearly damaged. If there is damage,
do not attempt to operate the instrument or to repair it without authorization. Doing
so can cause further damage and you may lose your warranty qualification.
PROLITE-55
Connectors(SC/APC,ST/APC)
3 ferrules
3.2 Power Supply
There are battery indicator and power plug on the screen to show the power supply.
When you use the DC 6v charger, there is no battery indicator on the screen. When
you do not connect the DC 6v charger, the adapter indicator will disappear on the
screen.
When you use the battery, the battery indicator on the screen will show the remaining
charge. An empty battery indicator means the power is almost out. When the battery
charge is extremely low to supply the necessary power, the instrument will
automatically switch off after several beeps of the buzzer. Please change the battery
or recharge it
5
PROLITE-55
nm
18 88
nm
18 88
nm
18 88
nm
18 88
4 Operation
4.1 Display and controls
4.1.1 Front(Panel Board)
6
PROLITE-55
>2s PERM
ON
OFF
KeyNo. Function
1
2
3
4
5
FHS2T01F
LASER SOURCE
>2s PERM
FH
TWIN
CW/Hz
ON
OFF
FHS2T01F
LASER SOURCE
>2s PERM
TWIN
CW/Hz
ON
OFF
TWIN
CW/Hz
ON
OFF
Wavelength Shifting Key: Switches working wavelength between
1310nm,1490nm and 1550nm.
Modulated Wavelength Shifting Key: Switches modulated wavelength
and continuous wavelength.
SINGLE: Auto-wavelength recognition is off.
TWIN: Auto-wavelength recognition is on.
Switches backlighting on/off.
Switches Instrument on/off. Long keypress while powering on to
activate the instrument without Auto-off function.
CW/Hz
TWIN
7
PROLITE-55
4.1.2 Back & top
Connector
Battary Plate
(including 2 units of AA batteries)rechargeables
DC 6v power input
4.1.3 LCD
AUTO-OFF
270Hz
1kHz
2kHz
8.8.8.8
18 88
nm
date
SINGLE
TWIN
Wavelength
DC Adapter
Battery Charge
Modulation
Power
Measurement Unit(dBm)
Auto-wavelength Recognition
Auto-off
8
PROLITE-55
4.2 Turning the instrument on and off
Note:
Press the “ON/OFF” key briefly.
The instrument powers on.(See the figure)
Press the “ON/OFF” key briefly again.
The instrument powers off.
Auto-off function
1 The instrument powers off automatically if no key press in 10 minutes.
2 Press the “ON/OFF” key for about 2 seconds to power on the instrument with
AUTO-OFF
-5.0
1310
nm
SINGLE
9
PROLITE-55
>2s PERM
ON
OFF
Table of contents
Other Promax Measuring Instrument manuals
Promax
Promax RANGER mini User manual
Promax
Promax PROLITE-20 User manual
Promax
Promax HD RANGER Eco User manual
Promax
Promax RANGER Neo 2 User manual
Promax
Promax Cable Ranger+ User manual
Promax
Promax RANGERNeo 2 ISDB-T User manual
Promax
Promax PROLITE-63B User manual
Promax
Promax HD RANGER 2 User manual
Promax
Promax MZ-505C User manual
Promax
Promax RANGER Neo 3 User manual
Promax
Promax PROMAX-10 Premium User manual
Promax
Promax 27 User manual
Promax
Promax PROMAX-12 User manual
Promax
Promax 6 User manual
Promax
Promax PROMAX-10 Premium User manual
Promax
Promax ATLAS NG User manual
Promax
Promax SATHUNTER+ User manual
Promax
Promax RANGER Neo 2 User manual
Promax
Promax RANGER mini User manual
Promax
Promax 26 User manual
