7
Please remove the Cond. electrode
protective cap from the probe before
use.
Step 1
Rinse the probe with de-ionized or
distilled water before use to remove
any impurities adhering on the
electrode. If the meter is not used for
a long time, please soak the probe in
clear water for more than 30 minutes to
eliminate the inert effect of the probe.
Step 2
Press the power on key.
Step 3
Dip the probe into the sample. Make
sure there is no air bubbles trapped in
the slot of the probe. Gentle stir the
probe to remove the air bubbles,
Making sure the electrode tips is
totally immersed in the testing sample.
Step 4
Wait until the reading is stabilized.
CONDUCTIVITY MEASUREMENT
SALINITY MEASUREMENT
Under normal mode, please connect
the Cond. probe to the meter. Press EC
SALT key to switch to SALT ppt unit.
Please follow the conductivity
measurement as step 1~4 above to
take the salinity measurement.
DISSOLVED OXYGEN MEASUREMENT
Pleas remove the DO electrode
protective cap on the electrode before
use.
