Pitney Bowes F680 Manual
Shipping & Mailing
Inserter
Operator Guide
International English Edition
SV40231 Rev. B
August 1, 2015
Horizontal Belt Stacker
for Relay Systems
TM
SV40231 Rev. B August 1, 2015
©2005, 2015 Pitney Bowes Inc. All rights reserved.
This book may not be reproduced in whole or in part in any fashion or
stored in a retrieval system of any type or transmitted by any means,
electronically or mechanically, without the express, written permission
of Pitney Bowes. We have made every reasonable effort to ensure the
accuracy and usefulness of this manual; however, we cannot assume
responsibility for errors or omissions or liability for the misuse or
misapplication of our products.
Due to our continuing program of product improvement, equipment and
material specifications as well as performance features are subject to
change without notice. Your machine may not have some of the features
described in this book.
E-Z Seal a registered trademark of Pitney Bowes Inc. ENERGY STAR
is a registered trademark of the United States Environmental Protection
Agency.
Note: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may
cause interference to radio communications. Operation of this equipment
in a residential area is likely to cause interference in which case the user
will be required to correct the interference at his own expense.
CAUTION: Changes or modifications to this equipment not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
It is certified that this system complies with all applicable
Directives of the European Union.
SV40231 Rev. B
Pitney Bowes Contact List
iv
If You Need Assistance
USA Contacts
▪ ProductName-HorizontalBeltStacker
▪ Model-F680
▪ Forfrequentlyaskedquestions,goto:
www.pb.com and click on Customer Support.
▪ Toplacerequestsforserviceortraining,goto:
www.pb.com and click on My Account.
▪ ToorderPBsuppliesandaccessories,goto:
www.pb.com and click on Online Store.
▪ Toviewandpayinvoicesonline,goto:
www.pb.com and click on My Account.
▪ Toviewinventory,goto:
www.pb.com and click on My Account.
▪ Fordirectquestions,call:1.800.522.0020.CustomerService
RepresentativesareavailableMondaythroughFriday,8:00AM-
8:00PMET.
Canada Contacts
▪ ProductName-HorizontalBeltStacker
▪ Model-F680
▪ Forfrequentlyaskedquestionsortoordersupplies,goto:
www.pitneybowes.ca
▪ Fordirectquestions,call:1.800.672.6937.CustomerService
RepresentativesareavailableMondaythroughFriday,8:30AM-
4:00PMET.
Contacts in other countries
Contact information will be given either on a sticker on the system or in a
separate document supplied with your system.
SV40231 Rev. B v
Important Safety Notes
Follow these precautions whenever you use your belt stacker:
• Read all instructions before you attempt to operate the system. Keep
the Operator Guide accessible for quick reference.
• Use this equipment only for its intended purpose.
• Place the system close to an easily accessible wall outlet.
• Place the system in an accessible location to allow for proper venting
of the equipment and to facilitate servicing.
• Use the power cord supplied with the machine and plug it into a
properly grounded wall outlet that is located near the machine and
easily accessible. Failure to properly ground the machine can result in
severe personal injury and/or fire.
• The power cord wall plug is the primary means of disconnecting the
machine from the AC supply.
• DO NOT use a wall outlet controlled by a wall switch or one that is
shared with other equipment.
• DO NOT use an adapter plug on the line cord or wall outlet.
• DO NOT remove the ground pin from the line cord.
• Makesuretheareainfrontofthewalloutletintowhichthemachineis
plugged is free from obstruction.
• DO NOT route the power cord over sharp edges or trap it between
piecesoffurniture.Makesurethereisnostrainonthepowercord.
• To reduce the risk of fire or electrical shock, DO NOT attempt to
remove covers or disassemble the control panel or its base. The
cabinetencloseshazardousparts.Ifyoushoulddamagetheunit,
contact Your system supplier. Refer to the Contact Information List at
the front of this guide for more information.
• If the unit becomes damaged, unplug it from the wall, then contact
Your system supplier. Refer to the Contact Information List at the front
of this guide for more information.
• Keep fingers, long hair, jewelry and loose clothing away from moving
parts at all times.
• Avoid touching moving parts or materials while the machine is in
use. Before clearing a jam, be sure machine mechanisms come to a
complete stop.
• Remove jammed material gently and carefully.
• Do not place lighted candles, cigarettes, cigars, etc., on the system.
continued >
SV40231 Rev. B
vi
• To prevent overheating, do not cover vent openings.
• Use only approved supplies, in particular aerosol duster. Improper
storage and use of aerosol dusters or flammable aerosol dusters, can
cause an explosive-like condition that could result in a personal injury
and/or property damage. Never use aerosol dusters labeled flammable
and always read instructions and safety precautions on the duster
container label.
• Toobtainsuppliesand/orMaterialSafetyDataSheets,contactyour
system supplier. Refer to the Contact Information List at the front of
this guide for more information.
• Operation of this equipment without periodic maintenance will inhibit
optimum operating performance and could cause the equipment to
malfunction. Contact your system supplier for the required service
schedule.
• Always follow specific occupational safety and health standards for
your workplace.
• To reduce the risk of fire or electrical shock, DO NOT attempt to
remove covers or disassemble the control panel or its base. The
cabinetencloseshazardousparts.Ifyoushoulddamagetheunit,
contact your system supplier. Refer to the Contact Information List at
the front of this guide for more information.
Important Safety Notes (continued)
SV40231 Rev. B vii
Beforesettingupandusingthehorizontalbeltstackeryoushouldbe
thoroughly familiar with its controls and setup procedure. You should also
be thoroughly familiar with each component of the Inserting system the belt
stacker is being used with.
ThisGuideisorganizedintothreechapters:
Chapter 1 - Introduction
Gives basic details of your belt stacker. This section includes:
What the Belt Stacker Does.............................................. 1-1
MainComponents............................................................. 1-3
The Control Panel ............................................................. 1-4
Principle of Operation ....................................................... 1-4
Chapter 2 - Operation
Use with the Relay™ 5000/6000/7000/8000 Inserters:
Setup of Right Angled mode ............................................. 2-1
Operation in Right Angled mode ....................................... 2-3
SetupofInLinemode-'Letter'sizedenvelopes .............. 2-5
OperationinInLinemode-'Letter'sizedenvelopes ........ 2-7
SetupofInLinemode-'Flats'sizedenvelopes................ 2-8
OperationinInLinemode-'Flats'sizedenvelopes ......... 2-10
Tandem Belt Stacker .................................................... 2-11
Use of the Belt Stacker with Other Equipment.......... 2-11
Chapter 3 - Reference
Covers subjects that may only be required occasionally. It includes:
Troubleshooting ................................................................ 3-1
Service .............................................................................. 3-2
Specifications.................................................................... 3-3
SV40231 Rev. B
viii
Introduction • 1
1-1SV40231 Rev. B
What the Belt Stacker Does
General
The stacker is designed as an output device for a range of Inserting
Systems and also as a general output device for other machines such as
address printers.
This guide covers use of the belt stacker in all configurations.
Configurations
The belt stacker can operate at right angles (to the left or right) and also
in-line with the machine outputting to it, depending on machine and/or
material being used.
Inserter
Belt
Stacker
Belt Stacker positioned
at right angles to the
right
Inserter
Belt
Stacker
Belt Stacker positioned
at right angles to the
left
Inserter Belt Stacker Belt Stacker positioned
‘in line’
1 • Introduction
1-2 SV40231 Rev. B
The control panel can be positioned on either side of the stacker to
accommodate the different configurations possible. It incorporates a
variable speed control, run-out button, power switch and power supply.
In most cases, the belt stacker is mounted on height adjustable legs.
However,versionswithoutlegsareavailablethatcanbeplacedonan
existing table of the correct height. In these cases, no adjustment of the
belt stacker height is possible.
TheRelay™5000/6000/7000/8000Insertersoutputsmall(‘letter’)
envelopesatadifferentheighttolarge(‘flat’)envelopes.Tandembelt
stacker configurations are available to allow automatic stacking of both
envelopesizessimultaneously.
Your Model
The belt stacker is tailored to work with the particular machine outputting
to it, and the configuration used, by the addition of kits. Your stacker will be
supplied with only the correct kit(s) for your particular installation.
This guide explains setup and operator adjustments for each machine
combination, but assumes that the stacker has been previously installed
by a service representative and that all necessary kits of adapters and
parts are available.
In most cases, it is NOT possible to change the belt stacker configuration
or link the stacker to a different Inserter without some modifications being
necessary. If you wish to do this, contact your machine supplier for advice.
Other manuals for F680
1
Table of contents
Other Pitney Bowes Postal Equipment manuals
Pitney Bowes
Pitney Bowes MAILSTATION 2 User manual
Pitney Bowes
Pitney Bowes SendPro C Manual
Pitney Bowes
Pitney Bowes SendPro HVF1 User manual
Pitney Bowes
Pitney Bowes SendPro C Lite Manual
Pitney Bowes
Pitney Bowes DM50 Series User manual
Pitney Bowes
Pitney Bowes DM50 Series Technical manual
Pitney Bowes
Pitney Bowes DM Series User manual
Pitney Bowes
Pitney Bowes SendPro C series Manual
Pitney Bowes
Pitney Bowes DL50 Manual
Pitney Bowes
Pitney Bowes SendPro C Manual
Pitney Bowes
Pitney Bowes PostPerfect B700 User manual
Pitney Bowes
Pitney Bowes Small Office Series Manual
Pitney Bowes
Pitney Bowes Small Office Series Mailstation 2 User manual
Pitney Bowes
Pitney Bowes W985 User manual
Pitney Bowes
Pitney Bowes MAILSTATION 2 User manual
Pitney Bowes
Pitney Bowes SendPro P Series User manual
Pitney Bowes
Pitney Bowes DL100 Manual
Pitney Bowes
Pitney Bowes DL400 Manual
Pitney Bowes
Pitney Bowes DL250 Manual
Pitney Bowes
Pitney Bowes SmartLink Cellular Connectivity Kit User manual
