PEERLESS Perfect Mount PMF2X2 User manual
ISSUED: 12-21-09 SHEET #: 202-9424-1
Universal Flat Wall Mount
for 10" - 40" Screens
Max UL Load Capacity: 115 lb (52 kg)
©
UL
USC
This product was designed to be installed on wood stud walls and solid concrete (2000 psi
density minimum) or cinder block walls. Before installing make sure the supporting surface will
support the combined load of the equipment and hardware. Screws must be tightly secured. Do
not overtighten screws or damage can occur or product may fail. Never exceed the Maximum UL
Load Capacity. This product is intended for indoor use only. Use of this product outdoors could
lead to product failure or personal injury. For support please call customer care at 1-800-865-2112.
WARNING
Model: PMF2X2
Installation Guide
2 of 38 ISSUED: 12-21-09 SHEET #: 202-9424-1
Tools Needed for Assembly
recommended)
block wall
D(2)E(2)
M5 x 6 mm
M(4)
N(4)
M4 x 10 mm
F(4)
M4 x 20 mm
G(4)H(4)M6 x 12 mm
J(4)
M6 x 20 mm
K(4)
L(4)
P(2)
M5 x 12 mm
C(1)
A(1)
B(1)
3 of 38 ISSUED: 12-21-09 SHEET #: 202-9424-1
Installing to Wall
1
Use wall mount (A) as a template, make sure it is level, and mark two mounting holes along the
(A) and attach to wall with two wood screws (D
WOOD STUD
A
D
TOP CUTAWAY VIEW
Wood screws must
center in stud.
STUD
D
A
WARNING
Do not over tighten screws, or
damage may occur.
WARNING
TOP CUTAWAY VIEW
4 of 38 ISSUED: 12-21-09 SHEET #: 202-9424-1
Installing to Solid Concrete or Cinder Block
1
Level wall mount (A
E) into holes and secure wall
mount (A) with two wood screws (D
CINDER
BLOCK
A
D
E
SOLID
CONCRETE
5 of 38 ISSUED: 12-21-09 SHEET #: 202-9424-1
anchors. Do not drill into mortar joints! Be sure to mount in a solid part of the block, gener-
hole instead of a hammer drill to avoid breaking out the back of the hole when entering a
void or cavity.
directly to load-bearing concrete.
WARNING
1
2
E
A
E
D
concrete
A) over anchors (E). Secure with screws (D). Tighten screws.
Drill holes and insert anchors (E).
WARNING
CUTAWAY VIEW
wall plate
drywall
wall plate
drywall
CORRECT
INCORRECT
concrete
concrete
6 of 38 ISSUED: 12-21-09 SHEET #: 202-9424-1
Thread M5 x 12 mm screws (P) to hook bracket (B
B) to adapter plate (C) using four M5 x 6 mm screws (M) and
#10 washers (N
Attaching Adapter Plate to Screen with VESA 200 or 200 x 100
Mounting Pattern
2
C
F
2-1
Note:
FOR VESA 200 x 100 MOUNTING PATTERN:
C) to back of screen using four
M4 x 10 mm screws (F) as shown below.
*Note: If screw (F) gets less than three threads of engagement, attach adapter plate (C) to
back of screen using four M4 x 20 mm screws (G) and four spacers (H) as indicated below.
Skip to step 4 on page 10.
M
B
N
P
B
C
in the screen inserts or if screws bottom
out and bracket is still not tightly secured,
damage may occur to screen or product
may fail.
WARNING
*For screens with a hole
pattern in a pocket, spacers
(H) go between adapter plate
(C) and screen. H
7 of 38 ISSUED: 12-21-09 SHEET #: 202-9424-1
in the screen inserts or if screws bottom
out and bracket is still not tightly secured,
damage may occur to screen or product
may fail.
WARNING
2-2 FOR VESA 200 MOUNTING PATTERN:
C) to back of screen using four
M6 x 12 mm screws (J) as shown below.
*Note: If screw (J) gets less than three threads of engagement, attach adapter plate (C)
to back of screen using four M6 x 20 mm screws (K). If screw (K) still gets less than three
L).
Skip to step 4 on page 10.
C
J
8 of 38 ISSUED: 12-21-09 SHEET #: 202-9424-1
FOR VESA 75 MOUNTING PATTERN:
B) to back of screen using four
M4 x 10 mm screws (F) as shown below.
*Note: If hole pattern is in a pocket, attach hook bracket (B) to back of screen using four
M4 x 20 mm screws (G) and four spacers (H) as indicated below.
Attaching Hook Bracket to Flat Panel Screen Using VESA 75 and 100 mm
mounting patterns
3-1
in the screen inserts or if screws bottom
out and bracket is still not tightly secured,
damage may occur to screen or product
may fail.
WARNING
F
B
*For screens with a hole
pattern in a pocket, spacers
(H) go between hook bracket
(B) and screen. H
Thread M5 x 12 mm screws (P) to hook bracket (B
3
P
B B
P
9 of 38 ISSUED: 12-21-09 SHEET #: 202-9424-1
FOR VESA 100 MOUNTING PATTERN:
B) to back of screen using four
M4 x 10 mm screws (F) as shown below.
3-2
in the screen inserts or if screws bottom
out and bracket is still not tightly secured,
damage may occur to screen or product
may fail.
WARNING
B
F
10 of 38 ISSUED: 12-21-09 SHEET #: 202-9424-1
Installing and Removing Flat Panel Screen
4
Hook screen onto wall plate (A
can handle. Use additional man power or mechanical lifting equipment to safely handle
placement of the screen.
SCREEN A
force. Overtightening can cause damage
to mount.
CAUTION
Table of contents
Languages:
Other PEERLESS Rack & Stand manuals
PEERLESS
PEERLESS PED 410 Guide
PEERLESS
PEERLESS ACC 314 Guide
PEERLESS
PEERLESS IB40 Guide
PEERLESS
PEERLESS SmartMount SA750P Guide
PEERLESS
PEERLESS LDM233K Guide
PEERLESS
PEERLESS LCC 18-C Guide
PEERLESS
PEERLESS Solid-Point PS 1 Guide
PEERLESS
PEERLESS FPZ-655 Guide
PEERLESS
PEERLESS Paramount PS200 Guide
PEERLESS
PEERLESS PJF2-UNV Guide
PEERLESS
PEERLESS SmartMount ST 635 Guide
PEERLESS
PEERLESS DS-VW760 and assembly Guide
PEERLESS
PEERLESS MIS 213 Guide
PEERLESS
PEERLESS SmartMount D-FPF-320 Guide
PEERLESS
PEERLESS Paramount PC930A Guide
PEERLESS
PEERLESS DS-VL-H018 Guide
PEERLESS
PEERLESS DS415 Guide
PEERLESS
PEERLESS PARAMOUNT PRA2X2 User manual
PEERLESS
PEERLESS DS-VW660 and assembly Guide
PEERLESS
PEERLESS PLAV 70 Guide
Popular Rack & Stand manuals by other brands
Salamander
Salamander Acadia AC/W/L400/WH Assembly instructions
Fohhn
Fohhn VAT-09 Mounting instruction
ricoo
ricoo FS0522 quick start guide
AMSOIL
AMSOIL BMK-22 Installation and service instructions
Kargo Master
Kargo Master 48220 installation guide
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 installation instructions
