PEERLESS IWB600-WB Guide

1 of 7 ISSUED: 02-03-10 SHEET #: 125-9095-5 06-02-10

Model: IWB600-WB

Installation and Assembly:

Wall Mount for SMARTboard SB685/SB690

Max Load Capacity: 50 lb (22.6 kg)

2 of 7 ISSUED: 02-03-10 SHEET #: 125-9095-5 06-02-10

D E

G I

L M N

PARTS LIST

Description Qty. Part #

wall plate 1 095-4652

Bupper cross support 1 095-4962

Csupport bracket 2 095-4667

Dvertical support 2 095-4666

Erubber bumper 2 590-1159

F#10 washer 2 540-9442

GM4 x 6 mm phillips screw 2 520-2032

H#10-32 x 3/8 thumb screw 6 560-2107

Iknob 2 560-0223

J1/4 washer 6 540-9444

KM4 nylock nut 4 530-1055

LM5 nylock nut 8 530-1019

MM4 x 8 mm phillips screw 4 520-2237

NM5 x 20 mm phillips screw 8 510-1208

3 of 7 ISSUED: 02-03-10 SHEET #: 125-9095-5 06-02-10

NOTE: Make sure ange of wall bracket is located on top as shown in detail 1

Be sure wall bracket (A) is level and in desired position. Then use wall bracket (A) as a template to mark center

of four mounting holes. Drill four mounting holes. Attach wall bracket (A) to mounting surface using four screws

provided by installer and four 1/4 washers (J) if required. Once secure, wall bracket (A) will be ush with the top of

the vertical bracket (D).

Fasten two M4 x 6 mm phillips screws (G) into ends of wall bracket (A) as shown in Detail 1.

NOTE: Vertical brackets (D) may be used to determine location of wall bracket (A).

• Installer must verify that the supporting surface will safely support the combined load of the equipment and all

attached hardware and components.

WARNING

Screws provided by installer

Flange

ATOP

Detail 1

4 of 7 ISSUED: 02-03-10 SHEET #: 125-9095-5 06-02-10

Secure SMARTboard channel to upper cross support (B) using eight M5 x 20 mm phillips screws (N) and eight

M5 nylock nuts (L).

NOTE: Make sure to skip attachment point as shown below.

Skip attachment point

Secure Vertical brackets (D) to wall bracket (A) using two #10-32 x 3/8 thumb screws (H) and #10 at washers

(F).

Detail 2

SMARTboard

channel

5 of 7 ISSUED: 02-03-10 SHEET #: 125-9095-5 06-02-10

Secure upper cross support (B) to vertical supports (D) using four M4 x 8 mm phillips screws (M), and

M4 nylock nuts (K).

Hook SMARTboard into SMARTboard channel on upper cross support (B).

SMARTboard

Detail 3

Detail 4

SMARTboard

channel

SMARTboard

channel

6 of 7 ISSUED: 02-03-10 SHEET #: 125-9095-5 06-02-10

C D

Detail 5

Fasten two support brackets (C) to vertical supports (D) using four #10-32 x 3/8 thumb screws (H).

Slide support brackets (C) up until bottom of SMARTboard rests on support as shown in detail 5.

Tighten four #10-32 x 3/8 thumb screws (H).

Fasten knob (I) through outside hole in support bracket (C) to determine rubber bumper (E) placement.

Secure rubber bumper (E) to board.

Repeat on opposite side of board.

7 of 7 ISSUED: 02-03-10 SHEET #: 125-9095-5 06-02-10

Secure bottom of vertical supports (D) to mounting surface using two screws provided by installer,

and 1/4 washers (J) if required.

NOTE: Make sure mounting surface is suitable to hold the weight of the mount and smart board.

All other brand and product names are trademarks or registered trademarks of their respective owners.

Screws provided by

installer

Table of contents

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 