PEERLESS ACC951 Guide

ISSUED: 10-31-10 SHEET #: 120-9091-2 11-08-10

Parts List

Description Qty. Part #

Aaccessory bracket 1 201-P1746

Installation and Assembly - A/V Component Shelf Accessory

Bracket Connects DS and VPM component shelves to SA752,

SA761, SA763 or SA771 articulating wall mounts

Models: ACC951

Max Load Capacity: 30 lb (13.7 kg)*

Some parts may appear slightly

different than illustrated.

Before you start make sure all parts listed are included

with your product.

IMPORTANT! Read instruction sheet before you start installation and assembly.

If wall arm (sold separately) has not been

mounted, skip to step 3 on page 2.

Remove two M10 x 15 mm screws from bottom

holes of adapter plate. Loosen two M10 x 15 mm

screws from top holes of adapter plate.

*Combined load of equipment, hardware and

components is not to exceed max load capacity of

wall arm (sold separately)

Unhook universal or dedicated adapter bracket

from adapter plate.

2UNIVERSAL

ADAPTER BRACKET

ADAPTER PLATE

REMOVE

M10 X 15 MM SCREWS

LOOSEN

M10 X 15 MM SCREWS

ISSUED: 10-31-10 SHEET #: 120-9091-2 11-08-10

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

2 of 3

Remove two M10 x 15 mm socket screws from universal adapter bracket. Hand thread two M10 x 15 mm

socket screws through top slots of accessory bracket (A) into top holes of universal adapter bracket as shown in

ﬁgure 3.1 leaving 1/8" of exposed thread as shown in detail 1.

Hook socket screws onto universal adapter bracket as shown in ﬁgure 3.2.

ﬁg 3.1

ﬁg 3.2

1/8"

DETAIL 1

ISSUED: 10-31-10 SHEET #: 120-9091-2 11-08-10

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

3 of 3

Insert two M10 x 15 mm socket screws into bottom mounting holes of adapter plate as shown in ﬁgure 4.1.

Adjust accessory bracket (A) so bottom tray touches bottom of display and tighten all fasteners using a 6 mm

allen wrench included with wall arm.

Attach DS or VPM component shelf (sold separately) to bottom tray using M5 screws included with DS or VPM

component shelf as shown in ﬁgure 4.2.

All other brand and product names are trademarks or registered trademarks of their respective owners.

BOTTOM TRAY

M10 X 15 MM SCREWS

M5 SCREWS

ﬁg 4.1 ﬁg 4.2

DS OR VPM COMPONENT

SHELF (SOLD SEPARATELY)

This manual suits for next models

Other PEERLESS Rack & Stand manuals

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 