PEERLESS MIS488 Guide

2300 White Oak Circle. • Aurora, IL 60502 • (800) 729-0307 or (708) 865-8870 • Fax: (708) 865-2941 • www.peerlessmounts.com

ISSUED: 11-19-07 SHEET #: 124-9135-2 01-06-11

Installation and Assembly:

Pole PC Mount

Model: MIS488

Max Load Capacity: 25 lb (11.3 kg)

Note: Read entire instruction sheet before you start installation and assembly.

• DonotbegintoinstallyourPeerlessproductuntilyouhavereadandunderstoodtheinstructionsandwarnings

containedinthisInstallationSheet.Ifyouhaveanyquestionsregardinganyoftheinstructionsorwarnings,please

callPeerlesscustomercareat1-800-729-0307.

• Thisproduct should only be installed by a qualified professional.

• Makesure that the wall will safely support the combined load of the equipmentand all attached hardware and compo-

nents.

• NeverexceedtheMaximumLoadCapacityof 25 lb (11.3 kg).

• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.

• Tightenscrews firmly, but do not overtighten. Overtighteningcandamage the items, greatly reducingtheirholding

power.

WARNING

2 of 4 ISSUED: 11-19-07 SHEET #: 124-9135-2 01-06-11

Note: Read instruction sheet before you start installation and assembly.

Note: Some parts may appear slightly different than illustrated.

UIQ

Safety Belt Kit (Z)

BELTWITH

CINCHBUCKLE BELTWITHOUT

CINCHBUCKLE

TRI-BARBELTCLIP CLEARSTRIPS BELTGUIDE

Description Qty. Part #

I3/8-16 hex nut 2 530-9310

Nwasher 2 540-9407

QPC bracket 1 124-T1133

S3/8-16 x 3.25" u-bolt 1 560-1060

T1/4-20 nylock nut 4 530-9413

UPC mounting bracket 1 124-T1134

Wbumper 6 590-1159

Y1/4-20 x 5/8" carraige bolt 4 520-1175

Zsafety belt 1 170-8039-

Parts List

3 of 4 ISSUED: 11-19-07 SHEET #: 124-9135-2 01-06-11

• Installermust verify that the supporting surface will safely support the combinedweightof all attached equipment and

hardware.

Attach PC bracket (Q) to PC mounting bracket (U) using four 1/4-20 nylock nuts (T) and four 1/4-20 x 5/8" carraige

bolts(Y).

Attach PC mounting bracket (U) to existing pole

using four washers (N) andfourhexnuts (I).

1 2

Attach six bumper strips (W) to PC bracket (Q).

WARNING

EXISTINGPOLE

4 of 4 ISSUED: 11-19-07 SHEET #: 124-9135-2 01-06-11

NOTE: Use safety belt (Z) instruction in conjuction with this step.

Fasten clear strips to the two slots in PC bracket (Q). Set HD box into computer plate (B). Fasten belt with

cinch buckle to belt without cinch buckle. Place tri-bar belt clips and belt guide onto belt as shown in the safety

belt instructions. Feed the ends of the belt through the PC bracket (Q) slots and through tri-bar belt clip. Cinch

the end of the belt so that the PC is securely held.

NOTE: Trim off the end of the belt if necessary, then lightly burn the end of the belt to prevent fraying.

Allotherbrandandproductnamesaretrademarksorregisteredtrademarksoftheirrespectiveowners.

BELTWITH

CINCHBUCKLE BELTWITHOUT

CINCHBUCKLE

TRI-BARBELTCLIP

BELTGUIDE

CLEARSTRIPS

BELTWITH

CINCHBUCKLE

BELTWITHOUT

CINCHBUCKLE

Table of contents

Other PEERLESS Rack & Stand manuals

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 