Pearson CE35-T Case User manual
MachineOperationsManual
8120 West Sunset Highway
Spokane, Washington 99224
509-838-6226/800-732-7766
Fax: 509-747-8532/www.pearsonpkg.com
CE35-T Case
Erector Options
Copyright © Pearson Packaging Systems.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means (electronic, mechanical, photocopying,
recording, or otherwise), without the prior written permission of:
Pearson Packaging Systems
W. 8120 Sunset Highway
Spokane, WA 99224
1-800-732-7766
www.pearsonpkg.com
We strive to ship up-to-date, accurate manuals with our machines, but because we are
continually improving our products, this is not always possible. We provide this document
“as is” at the time of shipping. Please provide your machine serial number whenever
ordering parts or referencing information to ensure we supply you with the correct parts for
your machine.
Pearson disclaims any liability or responsibility to any person for loss or damages,
including expenses, which may arise or result from the use of any information contained in
this manual. Not limited to fines or penalties for the violation of any federal, state, or local
regulations.
Pearson will not be responsible for the successful operation of any of its products that have
been modified in any way by anyone other than an authorized factory representative.
No patent liability is assumed with respect to the use of this information.
Most references to manufacturers or their products are registered trade names and are to be
treated accordingly.
Printed in the United States of America.
About this Manual
This manual provides instruction on installation, machine safety, operation, preventative
maintenance, troubleshooting and service procedures for the CE35-T Case Erector Options.
Important: The features shown in this manual are standard. Customer option
information is referenced in the Option section at the end of this
manual. Please review the Option section, if applicable, before
starting up, loading, running or shutting down the machine.
Important: For the purpose of this manual, photocells, photoeyes, proximity
switches, and limit switches are referred to as sensors.
Operator Message Boxes
Operator message boxes are used throughout the manual to bring attention to important
information, cautions or warnings beneficial for safe and efficient machine operation. In
some cases, the operator message boxes reflect the safety labels on the machine. Operator
message boxes include, but are not limited to, the following:
An imminently hazardous situation which, if not avoided, will result in
death or serious injury.
Danger! Equipment starts automatically. Lock out/tag out before
servicing.
A potentially hazardous situation which, if not avoided, could result in
death or serious injury.
Warning! Moving Parts can crush and cut. Do NOT operate with guard
removed. Follow lock out procedure before servicing.
Operations Manual CE35-T Case Erector Options
CE35T Options
AboutthisManual
3
Warning! Avoid injury. Do NOT operate machine without all guards in
place.
A potentially hazardous situation which, if not avoided, may result in
minor or moderate injury.
Pinch Points Any point at which it is possible for a portion of the body to
be caught and injured between moving machine or equipment or work
piece parts.
Caution A potentially hazardous situation which, if not avoided, may
result in property damage (used without the safety alert symbol).
Safety Relates directly to a machine or operator safety issue or concern.
Important Information important to machine operation.
Note Additional relevant information or comments.
CE35-T Case Erector Options Operations Manual
CE35T Options
4
launaMsihttuobA
Table of Contents
About this Manual ........................3
Operator Message Boxes .............................3
Additional inline horizontal magazine capacity ........7
In This Chapter ..................................7
Option Overview..................................7
Installation Procedures...............................8
Machine Safety ..................................8
Machine Operation ................................8
How-To ......................................8
Troubleshooting ..................................8
Preventive Maintenance ..............................9
Service .......................................9
Beacon Indicator Bank ......................11
In This Chapter ..................................11
Standard Option Overview ............................11
Non-standard Options Overview .........................11
Installation Procedures ..............................12
Machine Safety ..................................12
Machine Operation ................................13
How-To ......................................13
Troubleshooting .................................13
Preventive Maintenance .............................14
Service ......................................14
Dual Speed ............................15
In This Chapter ..................................15
Option Overview .................................15
Installation Procedures ..............................15
Machine Safety ..................................15
Operations Manual CE35-T Case Erector Options
CE35T Options
TableofContents
5
Machine Operation ................................15
How To ......................................16
Troubleshooting .................................16
Preventive Maintenance .............................16
Service ......................................16
CE35-T Case Erector Options Operations Manual
CE35T Options
stnetnoCfoelbaT
6
Additional inline horizontal magazine capacity
In This Chapter
This chapter provides an equipment overview, operation instructions, how-to instructions,
troubleshooting and preventive maintenance for this option to the CE35-T Case Erector.
Option Overview
Additional inline horizontal pullout magazine configuration
l4 foot capacity with basic magazine
lOnly sold in 2 foot length increments
lIncludes additional one way ratchet assembly and extra skate wheels on
overhead assembly.
Option Number for foot length increment
C10809 - 2 ft C10811 - 4 ft. C10813 - 6 ft. C10815 - 8 ft.
Operations Manual CE35-T Case Erector Options
CE35T Options
Additionalinlinehorizontal
magazinecapacity
7
Fig. 1: Extended Magazine
Turn off main power, turn off air supply and follow lock out/tag
out procedures before making any adjustments to the machine.
Installation Procedures
The additional magazine section is installed at the factory and the entire
machine is shipped intact.
Machine Safety
Review the Machine Safety chapter in the CE35-T Case Erector manual.
Machine Operation
Review the Changeover Procedures of the CE35-T Case Erector manual.
Option Adjustments
Adjustments are the same with the side guide lining up with the standard side
guide.
How-To
Review the How-To chapter in the CE35-T manual.
Troubleshooting
If the Magazine does not operate …
Check the bearings and pivot arms; lubricate, repair or replace as required.
Check pneumatics.
Check all adjustments.
If the blanks from the Magazine Feed do not pull off correctly ....
Check vacuum cups; replace if worn.
Check the adjustment of the Magazine side guides.
Check the vacuum system for clogging.
CE35-T Case Erector Options Operations Manual
CE35T Options
8
latnozirohenilnilanoitiddA
yticapacenizagam
Check timing of the vacuum release.
Preventive Maintenance
Review the Preventive Maintenance chapter in the CE35-T manual.
Service
To contact our Service Department, call 800-732-7766. When prompted, enter 2
for the service department. Select the appropriate number for the Service branch
you would like to contact when prompted.
lService Parts: Enter 1.
lService Technical Support: Enter 2.
lService Scheduling Coordinator: Enter 3.
lService Engineering Quote Team: Enter 4.
Operations Manual CE35-T Case Erector Options
CE35T Options
Additionalinlinehorizontal
magazinecapacity
9
This page intentionally left blank.
CE35-T Case Erector Options Operations Manual
CE35T Options
10
latnozirohenilnilanoitiddA
yticapacenizagam
Table of contents
