PCE Instruments PHM 14 User manual

PCE-PHM 14 pH Meter

User Manual

User manuals in various languages (français,

italiano, español, português, nederlands, türk, polski,

русский, 中文) can be found by using our

product search on: www.pce-instruments.com

Last change: 2 May 2018

v1.0

English

 
 © PCE Instruments 
 
 
Contents 
1Safety notes........................................................................................... 1 
2Features ................................................................................................. 2 
3Applications........................................................................................... 2 
4Specifications........................................................................................ 2 
5Front Panel Description .......................................................................3 
6Calibration ............................................................................................. 3 
7Important information on the calibration ...........................................5 
8Clear calibration.................................................................................... 6 
9Measuring procedure............................................................................ 6 
10 Delivery contents .................................................................................. 7 
11 Warranty................................................................................................. 7 
12 Disposal ................................................................................................. 7 
 

1 Safety notes

Please read this manual carefully and completely before you use the device for the first time. The

device may only be used by qualified personnel and repaired by PCE Instruments personnel.

Damage or injuries caused by non-observance of the manual are excluded from our liability and

not covered by our warranty.

•The device must only be used as described in this instruction manual.If used otherwise,

this can cause dangerous situations for the user and damage to the meter.

•The instrument may only be used if the environmental conditions (temperature, relative

humidity, …) are within the ranges stated in the technical specifications. Do not expose

the device to extreme temperatures, direct sunlight, extreme humidity or moisture.

•Do not expose the device to shocks or strong vibrations.

•The case should only be opened by qualified PCE Instruments personnel.

•Never use the instrument when your hands are wet.

•You must not make any technical changes to the device.

•The appliance should only be cleaned with a damp cloth. Use only pH-neutral cleaner,

no abrasives or solvents.

•The device must only be used with accessories from PCE Instruments or equivalent.

•Before each use, inspect the case for visible damage. If any damage is visible, do not

use the device.

•Do not use the instrument in explosive atmospheres.

•The measurement range as stated in the specifications must not be exceeded under

any circumstances.

•Non-observance of the safety notes can cause damage to the device and injuries to

the user.

We do not assume liability for printing errors or any other mistakes in this manual.

We expressly point to our general guarantee terms which can be found in our general terms of

business.

If you have any questions please contact PCE Instruments. The contact details can be found at

the end of this manual.

2 Features

- Multi-purpose pH meter

- Backlit display

- Auto calibration

- Compact and lightweight

3 Applications

- Aquariums

- Drinks

- Fish hatcheries

- Food processing

- Photography

- Laboratory

- Quality control

- Schools

- Pools

- Water treatment

4 Specifications

Measuring range

0 ... 14 pH

Resolution

0.01 pH

Accuracy

(at 23 °C ± 5 °C / after calibration)

0.07 pH at 5 ... 9 pH

0.1 pH at 4 .. 10 pH

0.2 pH at 1 ... 3,9 pH & 10,1 ... 13 pH

Input impedance

1012 Ohm

Sampling rate

approx. 1 second

Operating conditions

0 ... 50 °C / 32 ... 122 °F; < 80 % RH

Calibration

internally at pH7; pH 4 and pH 10

Power supply

externally 9 V

Current consumption

approx. 11 mA

Dimensions

89 x 57 x 31 mm / 3.5 x 2.2 x 1.2"

Weight

approx. 117 g / 4.1 oz

pH electrode connection

BNC

5 Front panel description

1. Display

2. CAL / ENTER key

3. ESC key

4. ▼ (Down) key

5. pH electrode BNC socket

6. DC 9 V input socket

7. Positioning aid for adhesive pads

8. Apertures for fixing

6 Calibration

Prerequisites for calibration

- Ideally, the electrode will produce 0 mV at pH 7.00

- The ideal ambient temperature is 25 °C

Required equipment for calibration

- pH Electrode

- 2 pH solutions (pH 7.00 and pH 4.00)

Calibration procedure pH 7

1) Rinse the electrode in distilled water completely.

2) Connect the pH electrode to the meter and immerse it into the relevant calibration solution.

3) Power on the instrument.

4) Press the "CAL" key. The desired calibration value pH 7 will appear.

The display will show:

7.00

CAL

5) Press the "ENTER" key to confirm.

Calibration procedure pH 4

1) Rinse the electrode in distilled water completely.

2) Connect the pH electrode to the meter and immerse it into the relevant calibration solution.

3) Power on the instrument.

4) Press the "CAL" key. The desired calibration value pH 7 will appear.

The display will show:

7.00

CAL

5) Press the ▼ (Down) key until the desired calibration value appears:

4.00

CAL

6) Press the "ENTER" key to confirm.

Calibration procedure pH 10

1) Rinse the electrode in distilled water completely.

2) Connect the pH electrode to the meter and immerse it into the relevant calibration solution.

3) Power on the instrument.

4) Press the "CAL" key. The desired calibration value pH 7 will appear.

The display will show:

7.00

CAL

5) Press the ▼ (Down) key until the desired calibration value appears:

10.00

CAL

6) Press the "ENTER" key to confirm.

7 Important information on the calibration

- Before and after immersing the electrode into a pH solution, rinse it with distilled water.

- Calibrate each pH solution twice, if possible.

- It is recommended to calibrate in two steps: pH 7 first, followed by pH 4, then calibrate pH 7

again and then pH 10.

- If the calibration solution deviates by 2 pH, “ERR”will appear in the display.

8 Clear calibration

1) Power on the instrument.

2) Press the "CAL" key.

The following will be shown in the display:

7.00

CAL

3. Press the ▼ (Down) key until the following appears:

CLr

CAL

4. Press the "ENTER" key to confirm.

When the calibration has been cleared, the display will show:

End

9 Measuring procedure

1) Power on the instrument.

2) Immerse the electrode into the desired solution.

3) The instrument will display the measured pH value.

4) Rinse the electrode with distilled water.

10 Delivery contents

1 x pH Meter PCE-PHM 14

1 x pH electrode

2 x adhesive pads

1 x 9 V power adapter

1 x user manual

11 Warranty

You can read our warranty terms in our General Business Terms which you can find here:

https://www.pce-instruments.com/english/terms.

12 Disposal

For the disposal of batteries in the EU, the 2006/66/EC directive of the European Parliament

applies. Due to the contained pollutants, batteries must not be disposed of as household waste.

They must be given to collection points designed for that purpose.

In order to comply with the EU directive 2012/19/EU we take our devices back. We either re-use

them or give them to a recycling company which disposes of the devices in line with law.

For countries outside the EU, batteries and devices should be disposed of in accordance with

your local waste regulations.

If you have any questions, please contact PCE Instruments.

PCE Instruments contact information

Germany France Spain

PCE Deutschland GmbH PCE Instruments France EURL PCE Ibérica S.L.

Im Langel 4 23, rue de Strasbourg Calle Mayor, 53

D-59872 Meschede 67250 SOULTZ-SOUS-FORETS 02500 Tobarra (Albacete)

Deutschland France España

Tel.: +49 (0) 2903 976 99 0 Téléphone: +33 (0) 972 3537 17 Tel. : +34 967 543 548

Fax: +49 (0) 2903 976 99 29 Numéro de fax: +33 (0) 972 3537 18 Fax: +34 967 543 542

[email protected] [email protected] [email protected]

www.pce-instruments.com/deutsch www.pce-instruments.com/french www.pce-instruments.com/espanol

United States of America United Kingdom Italy

PCE Americas Inc. PCE Instruments UK Ltd PCE Italia s.r.l.

711 Commerce Way suite 8 Units 12/13 Southpoint Business Park Via Pesciatina 878 / B-Interno 6

Jupiter / Palm Beach Ensign Way, Southampton 55010 LOC. GRAGNANO

33458 FL Hampshire CAPANNORI (LUCCA)

USA United Kingdom, SO31 4RF Italia

Tel: +1 (561) 320-9162 Tel: +44 (0) 2380 98703 0 Telefono: +39 0583 975 114

Fax: +1 (561) 320-9176 Fax: +44 (0) 2380 98703 9 Fax: +39 0583 974 824

[email protected] [email protected] i[email protected]

www.pce-instruments.com/us www.pce-instruments.com/english www.pce-instruments.com/italiano

The Netherlands Chile Hong Kong

PCE Brookhuis B.V. PCE Instruments Chile S.A. PCE Instruments HK Ltd.

Institutenweg 15 RUT: 76.154.057-2 Unit J, 21/F., COS Centre

7521 PH Enschede Santos Dumont 738, local 4 56 Tsun Yip Street

Nederland Comuna de Recoleta, Santiago, Chile Kwun Tong

Telefoon: +31 (0)53 737 01 92 Tel. : +56 2 24053238 Kowloon, Hong Kong

Fax: +31 53 430 36 46 Fax: +56 2 2873 3777 Tel: +852-301-84912

[email protected] [email protected] [email protected]

www.pce-instruments.com/dutch www.pce-instruments.com/chile www.pce-instruments.cn

China Turkey

PCE (Beijing) Technology Co.,Ltd PCE Teknik Cihazları Ltd.Şti.

1519 Room, 6 Building Halkalı Merkez Mah.

Men Tou Gou Xin Cheng, Pehlivan Sok. No.6/C

Men Tou Gou District 34303 Küçükçekmece - İstanbul

102300 Beijing Türkiye

China Tel: 0212 471 11 47

Tel: +86 (10) 8893 9660 Faks: 0212 705 53 93

[email protected] [email protected].tr

www.pce-instruments.cn www.pce-instruments.com/turkish

This manual suits for next models

Table of contents

Other PCE Instruments Measuring Instrument manuals

PCE Instruments

PCE Instruments PCE-TG 75-ICA User manual

PCE Instruments

PCE Instruments PCE-PB N Series User manual

PCE Instruments

PCE Instruments PCE-228 User manual

PCE Instruments

PCE Instruments IR 90 User manual

PCE Instruments

PCE Instruments PCE-GMM 10 User manual

PCE Instruments

PCE Instruments PCE-TG 300-NO2-ICA User manual

PCE Instruments

PCE Instruments PCE-VT 3700 User manual

PCE Instruments

PCE Instruments PCE-ECT 50 User manual

PCE Instruments

PCE Instruments PCE-555 User manual

PCE Instruments

PCE Instruments PCE-VE 400N4 User manual

PCE Instruments

PCE Instruments PSE-SDL 1 User manual

PCE Instruments

PCE Instruments PCE-320 User manual

PCE Instruments

PCE Instruments PCE-VDL 16l User manual

PCE Instruments

PCE Instruments PCE-RS 27 User manual

PCE Instruments

PCE Instruments PCE-CP Series User manual

PCE Instruments

PCE Instruments PCE-WMT 200 User manual

PCE Instruments

PCE Instruments PCE-HWA 30 User manual

PCE Instruments

PCE Instruments PCE-CRM 40 User manual

PCE Instruments

PCE Instruments PCE-TG 300-P5EE User manual

PCE Instruments

PCE Instruments TUM 20 User manual

PCE Instruments

PCE Instruments PCE-900 User manual

PCE Instruments

PCE Instruments PCE-MSM 4 User manual

PCE Instruments

PCE Instruments PCE-N24 Series User manual

PCE Instruments

PCE Instruments PCE-MCM 10 User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual