Parkside PLDM A1 User manual
IAN 376305_2104
PAINT THICKNESS
GAUGE
Operation and safety notes
LAKKVASTAGSÁG-MÉRŐ
KÉSZÜLÉK
Kezelési és biztonsági utalások
MERILNIK GOSTOTE
LAKA
Navodila za upravljanje in
varnostna opozorila
ZAŘÍZENÍ NA MĚŘENÍ
TLOUŠŤKY LAKU
Pokyny pro obsluhu a
bezpečnostní pokyny
ZARIADENIE NA
MERANIE HRÚBKY LAKU
Pokyny pre obsluhu a
bezpečnostné pokyny
LACKDICKEN-
MESSGERÄT
Bedienungs- und
Sicherheitshinweise
PAINT THICKNESS GAUGE
PLDMA1
GB Operation and safety notes Page 5
HU Kezelési és biztonsági utalások Oldal 31
SI Navodila za upravljanje in varnostna opozorila Stran 59
CZ Pokyny pro obsluhu a bezpečnostní pokyny Strana 85
SK Pokyny pre obsluhu a bezpečnostné pokyny Strana 111
DE/AT/CH Bedienungs- und Sicherheitshinweise Seite 138
A
1
2
3
4
5
6
8
7
1.76±0.02mm
B
C
5
6
5GB
Warnings and symbols used ....... Page 7
Introduction .......................... Page 9
Intended use............................ Page 9
Scope of delivery........................ Page 9
Description of parts ...................... Page 10
Technical data .......................... Page 10
Safety instructions................... Page 12
Safety instructions for batteries/
rechargeable batteries.................... Page 15
Before first use ....................... Page 18
Insert/replace battery .................... Page 18
Preparing the product .................... Page 19
Operation............................. Page 19
Switching on/off ........................ Page 19
Measuring ............................. Page 20
Calibration ............................. Page 22
6 GB
Troubleshooting...................... Page 25
Cleaning and maintenance ......... Page 27
Disposal............................... Page 27
Warranty ............................. Page 28
Warranty claim procedure................. Page 29
Service ................................ Page 30
7GB
Warnings and symbols used
The following warnings are used in the instruction manual,
short manual, on the packaging and on the rating label:
This symbol means that the operating instructions
must be observed when using the product.
DANGER! This symbol in combination with the
signal word “Danger” marks a high-risk hazard
that if not prevented could result in death or
serious injury.
WARNING! This symbol in combination with
the signal word “Warning” marks a medium-risk
hazard that if not prevented could result in death
or serious injury.
CAUTION! This symbol in combination with the
signal word “Caution” marks a low-risk hazard
that if not prevented could result in minor or
moderate injury.
8 GB
ATTENTION! This symbol with the signal
word “Attention” indicates a possible property
damage.
NOTE: This symbol in combination with “Note”
provides additional useful information.
Danger – risk of explosion!
This mandatory sign indicates to wear suitable
protective gloves! Follow the instructions of this
warning to avoid hand injuries caused by objects
or contact with hot or chemical materials.
Direct current/voltage
Battery (Button cell) included
Safety information
Instructions for use
CE mark indicates conformity with relevant
EU directives applicable for this product.
9GB
PAINT THICKNESS GAUGE
Introduction
We congratulate you on the purchase of your new product.
You have chosen a high quality product. The instructions for
use are part of the product. They contain important information
concerning safety, use and disposal. Before using the product,
please familiarise yourself with all of the safety information and
instructions for use. Only use the product as described and for
the specified applications. If you pass the product on to anyone
else, please ensure that you also pass on all the documentation
with it.
Intended use
The product is suitable for measurement of thickness of non-
conductive, non-magnetic coatings on iron, steel or aluminum
of a vehicle. This product is intended for personal use. Not for
commercial use.
Scope of delivery
1 Aluminium (naked) substrate*
1 Calibration plate (1.76±0.02mm)
1 Button cell CR 2032 (3 V)
1 Short manual
10 GB
* NOTE: Naked substrate means metal substrate without
any paint coating on the surface.
Description of parts
[1] Probe
[2] Display
[3] TESTbutton
[4] UNITbutton
[5] Lid
[6] Battery compartment
[7] Calibration plate
[8] Naked substrate
Technical data
Measuring range: 0.00mm–2.20mm or
0.00mil–86.00mil
Resolution: 0.01mm/0.1mil
Overrange indication: OL shown on the display
Measurement accuracy
oFor measurements in NFe or Fe test mode in which the
product has been properly calibrated: ±0.05mm
This manual suits for next models
1
Table of contents
Languages:
Other Parkside Measuring Instrument manuals
Parkside
Parkside PKLL 8 A1 User manual
Parkside
Parkside PKLL 8 A1 User manual
Parkside
Parkside PMML 5 A2 User manual
Parkside
Parkside PWM 4 A1 User manual
Parkside
Parkside PWM 4 A1 User manual
Parkside
Parkside PLEM 50 B2 User manual
Parkside
Parkside PLEM 50 A1 User manual
Parkside
Parkside PLEM 50 B2 User manual
Parkside
Parkside PPHM 14 A1 User manual
Parkside
Parkside PMSHM 2 A1 User manual
Parkside
Parkside PZM 2 A1 User manual
Parkside
Parkside PNM 2 A1 User manual
Parkside
Parkside PKLL 7 E4 User manual
Parkside
Parkside PKLL 8 A1 User manual
Parkside
Parkside PKLL 7 C3 User manual
Parkside
Parkside PMSHM 2 A1 User manual
Parkside
Parkside PKLL 7 A1 User manual
Parkside
Parkside HG07773A User manual
Parkside
Parkside PLEM 50 B2 User manual
Parkside
Parkside 20 M PLEM 20 A4 User manual
