Panasonic S-Link FP2 User manual

Safety Precautions

Observe the following notices to ensure personal safety or to prevent accidents.

To ensure that you use this product correctly, read this User’s Manual thoroughly before use.

Make sure that you fully understand the product and information on safety.

This manual uses two safety flags to indicate different levels of danger.

If critical situations that could lead to user’s death or serious injury is assumed by

mishandling of the product.

WARNING

- Always take precautions to ensure the overall safety of your system, so that the whole system

remains safe in the event of failure of this product or other external factor.

- Do not use this product in areas with inflammable gas. It could lead to an explosion.

- Exposing this product to excessive heat or open flames could cause damage to the lithium battery

or other electronic parts.

If critical situations that could lead to user’s injury or only property damage is assumed

by mishandling of the product.

CAUTION

- To prevent excessive exothermic heat or smoke generation, use this product at the values less

than the maximum of the characteristics and performance that are assured in these specifications.

- Do not dismantle or remodel the product. It could cause excessive exothermic heat or smoke

generation.

- Do not touch the terminal while turning on electricity. It could lead to an electric shock.

- Use the external devices to function the emergency stop and interlock circuit.

- Connect the wires or connectors securely.

The loose connection could cause excessive exothermic heat or smoke generation.

- Do not allow foreign matters such as liquid, flammable materials, metals to go into the inside of the

product. It could cause excessive exothermic heat or smoke generation.

- Do not undertake construction (such as connection and disconnection) while the power supply is

on. It could lead to an electric shock.

- This manual and its contents are copyrighted.

- You may not copy this manual, in whole or part, without written consent of Panasonic Electric

Works SUNX Co., Ltd.

- Windows and Windows NT are registered trademarks of Microsoft Corporation in the United States

and/or other countries.

- All other company names and product names are trademarks or registered trademarks of their

respective owners.

- Panasonic Electric Works SUNX Co., Ltd. pursues a policy of continuous improvement of the

design and performance of its products, therefore, we reserve the right to change the

manual/product without notice.

WOBATWOGND

Table of Contents

Special Precautions

1. Selecting the Right Equipment.............................................................. 1-1

1.1 Features and Types ....................................................................................................1-2

1.1.1 Features.................................................................................................................1-2

1.1.2 Types.....................................................................................................................1-3

1.2 Restrictions.................................................................................................................1-4

1.2.1 Installation Position of S-LINK Units........................................................................1-4

2. Specifications ......................................................................................... 2-1

2.1 Parts Names and Functions .......................................................................................2-2

2.1.1 S-LINK Control Unit................................................................................................2-2

2.2 Specifications..............................................................................................................2-6

2.2.1 General Specifications............................................................................................2-6

2.2.2 S-LINK Controller Specifications.............................................................................2-7

3. I/O Assignments...................................................................................... 3-1

3.1 An Overview of I/O Allocation ....................................................................................3-2

3.1.1 Overview................................................................................................................3-2

3.1.2 Example of I/O Number and S-LINK Addresses......................................................3-2

3.2 Specifying the Number of Input/Output Points..........................................................3-3

3.2.1 How to Specify the Number of Input/Output Points..................................................3-3

3.2.2 Examples of Settings..............................................................................................3-4

3.3 Allocating I/O Numbers...............................................................................................3-5

3.3.1 I/O Allocation..........................................................................................................3-5

4. Construction and Wiring........................................................................ 4-1

4.1 Wiring Methods...........................................................................................................4-2

4.1.1 Type of Wiring for S-LINK.......................................................................................4-2

4.1.2 S-LINK Main Unit....................................................................................................4-2

4.2 S-LINK Main Power Supply.........................................................................................4-3

4.2.1 Role and Connection of S-LINK Main Power Supply ...............................................4-3

5. Starting and Ending Operations............................................................ 5-1

5.1 Sequence and Timing for Turning Power Supply On................................................5-2

5.1.1 Sequence...............................................................................................................5-2

5.2 Sequence of Turning Off Power Supplies..................................................................5-3

5.3 Timing..........................................................................................................................5-3

5.4 S-LINK Device Address Recognition .........................................................................5-4

5.4.1 Recognizing the Address........................................................................................5-4

5.4.2 Results and Processing of Address Recognition.....................................................5-5

5.5 Cofirming Connected Units........................................................................................5-6

5.5.1 Confirming All Recognized Addresses ....................................................................5-6

5.5.2 Confirming All Addresses Where Errors Have Occurred..........................................5-7

5.5.3 Confirming the On/Off Status of Addresses.............................................................5-8

6. Shared Memory.......................................................................................6-1

6.1 Configuration of the Shared Memory.........................................................................6-2

6.1.1 Shared Memory......................................................................................................6-2

6.1.2 Shared Memory Addresses.....................................................................................6-3

6.2 Shared Memory Reading Program.............................................................................6-6

6.2.1 High-level Instruction to be Used ............................................................................6-6

6.2.2 Example of Reading Program.................................................................................6-7

6.3 Shared Memory Writing Program...............................................................................6-8

7. What To Do If An Error Occurs ..............................................................7-1

7.1 Judging Errors From the Error Indicators.................................................................7-2

7.1.1 When the Error Indicators (ERROR LED) Light.......................................................7-2

7.1.2 How to Eliminate Errors..........................................................................................7-2

7.2 Judging by Error Codes .............................................................................................7-4

7.2.1 E34 (I/O Status Error) Occurred..............................................................................7-4

7.2.2 E42 (I/O Verify Error) Occurred...............................................................................7-4

7.3 Judging by Address Display ......................................................................................7-4

7.3.1 Function of Address Display ...................................................................................7-4

7.3.2 Judging Error Displays (When Numeric Value is Displayed)....................................7-5

8. Dimensions..............................................................................................8-1

8.1 Dimensions .................................................................................................................8-2

Special Precautions

This manual is the instruction manual for the FPΣS-LINK unit.

For detailed formation on the S-LINK, refer to the “S-LINK Design manual and Construction manual”.

Differences between FP0 S-LINK control unit and FP2 S-LINK unit

The specifications of FP0 S-LINK unit is basically the same as FP2 S-LINK unit, however, the following

specifications are different.

For detailed information, refer to various specifications and manuals.

Item FP

S-LINK unit FP0 S-LINK control unit

(S-LINK communication

part)

FP2 S-LINK unit

Wiring for S-

LINK

Standard wiring Standard wiring Standard wiring

Loop wiring

Fuse for S-LINK

power supply

Can be replaced.

(Tubular fuse: 5 m x 20 mm) Cannot be replaced. Cannot be

replaced.

No. of I/O points

setting (mode

switch)

Following mode switches

cannot be used.

No. 1: 0 input point/

64 output points

No. 7: 64 input points/

32 output points

No. D: 96 input points/

32 output points

Fixed at 64 input points/

64 output points All settings can be

used.

RUN/CHK.

selector switch

MONITOR switch

Available Not available Available

1-1

Chapter 1

Selecting the Right Equipment

1-2

1.1 Features and Types

1.1.1 Features

Wiring is donw from the S-LINK unit using an S-LINK exclusive 4-wire flat cable and an end hook-up

connector is connected at the end of the main cable. The maximum cable length is 200 meters (400

meters if a booster is used).

•The user may select combinations offering up to a total of 128 inputs and outputs.

•The inputs and outputs are handled by the program just like ordinary ones.

•The S-LINK system can be easily monitored by reading shared memory data.

•A board range of peripheral devices for the S-LINK enable easy ssytem configuration.

1-3

1.1.2 Types

Name

Internal function

Part No.

Product No.

FPΣS-LINK unit

128 input/output points using S-LINK FPG-SL AFPG780

1-4

1.2 Restrictions

1.2.1 Installation Position of S-LINK Units

The maximum of 4 S-LINK units can be installed as expansion units in the position to the left

of and adjacent to the FPΣcontrol unit.

No. of control I/O points

Types of control unit No. of I/O points

for control unit

No. of I/O points when

FPΣS-LINK unit is installed.

FPG-C32T2/FPG-C32T2TM Note1)

32 points

Max. 640 points Note2)

FPG-C28P2/FPG-C28P2TM 28 points Max. 636 points

Note2)

FPG-C24R2/FPG-C24R2TM

24 points

Max. 632 points

Note1) The FPΣexpansion unit cannot be fitted to the FPG-C32T or FPG-C32TTM.

Note2) It is the No. of points when 4 FPΣS-LINK units have been installed.

Key Point:

If the FP0 expansion unit and the FPΣexpansion unit are used together, the I/O points can be extended

up to 640 points for the FPG-C32T2/FPG-C32T2TM.

Other manuals for S-Link FP2

Table of contents

Other Panasonic Controllers manuals

Panasonic

Panasonic AWRP655N - MULTI FUNCTION CONTROLLER User manual

Panasonic

Panasonic EF-S1C User manual

Panasonic

Panasonic AWLK30 - LENS CONTROLLER User manual

Panasonic

Panasonic CZ-CAPEK2 Quick guide

Panasonic

Panasonic CZ-256ESMC2U User manual

Panasonic

Panasonic FY-EB90S1 Technical manual

Panasonic

Panasonic fp2/fp2sh User manual

Panasonic

Panasonic FP0-A21 User manual

Panasonic

Panasonic DPC-L100 Series User manual

Panasonic

Panasonic FP7 Series User manual

Panasonic

Panasonic FP7 Series User manual

Panasonic

Panasonic AFPXHEAD4 User manual

Panasonic

Panasonic ACXF60-03410 User manual

Panasonic

Panasonic FP7 Series User manual

Panasonic

Panasonic AW-RP60GJS User manual

Panasonic

Panasonic FP7 Series User manual

Panasonic

Panasonic FP0R Series User manual

Panasonic

Panasonic WV-CU101 User manual

Panasonic

Panasonic WVCU161C - SYSTEM CONTROLLER User manual

Panasonic

Panasonic FPS Series User manual

Panasonic

Panasonic GM1 Series User manual

Panasonic

Panasonic Programmable Controllers FP-X Series User manual

Panasonic

Panasonic CZ-256ESMC1U User manual

Panasonic

Panasonic FP E Series User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual

3M MicroTouch EX113 reference guide

KUHN

KUHN TKS user manual