Panasonic FP2 -C1A User manual

FP2 Analog Unit Manual

ARCT1F283E-4 04.10

FP2 Analog Unit

Manual

PROGRAMMABLE CONTROLLER

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Safety Precautions

Observe the following notices to ensure personal safety or to prevent accidents.

To ensure that you use this product correctly, read this User’s Manual thoroughly before use.

Make sure that you fully understand the product and information on safe.

This manual uses two safety flags to indicate different levels of danger.

WARNING

If critical situations that could lead to user’s death or serious injury is assumed by

mishandling of the product.

-Always take precautions to ensure the overall safety of your system, so that the whole

system remains safe in the event of failure of this product or other external factor.

-Do not use this product in areas with inflammable gas. It could lead to an explosion.

-Exposing this product to excessive heat or open flames could cause damage to the lithium

battery or other electronic parts.

CAUTION

If critical situations that could lead to user’s injury or only property damage is assumed

by mishandling of the product.

-To prevent abnormal exothermic heat or smoke generation, use this product at the values less

than the maximum of the characteristics and performance that are assure in these specifications.

-Do not dismantle or remodel the product. It could lead to abnormal exothermic heat or

smoke generation.

-Do not touch the terminal while turning on electricity. It could lead to an electric shock..

-Use the external devices to function the emergency stop and interlock circuit.

-Connect the wires or connectors securely.

The loose connection might cause abnormal exothermic heat or smoke generation

-Do not allow foreign matters such as liquid, flammable materials, metals to go into the

inside of the product. It might cause exothermic heat or smoke generation.

-Do not undertake construction (such as connection and disconnection) while the power

supply is on.

-This manual and its contents are copylighted.

-You may not copy this manual,in whole or part,without written consent of Matsushita Electric

Works,Ltd.

-Windows and Windows NT are registered trademarks of Microsoft Corporation in the

United States and/or other countries.

-All other company names and product names are trademarks or registered

trademarks of their respective owners.

-Matsushita Electric Works,Ltd. pursues a policy of continuous improvement of the

Design and performance of its products, therefore,we reserve the right to change the manual/

product without notice.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Table of Contents

Chapter 1 Functions and Restrictions

1.1 Features 1 - 3........................................................

1.2 Type of Unit 1 - 4.....................................................

1.3 Data Processing Functions 1 - 5........................................

1.4 Installation Restrictions 1 - 7...........................................

1.5 Current Consumption 1 - 8.............................................

1.6 Range Setting Restrictions 1 - 9........................................

Chapter 2 Parts and Specifications

2.1 CPU Unit with Analog I/O (FP2-C1A) 2 - 3...............................

2.2 Analog Input Unit (FP2-AD8) 2 - 5......................................

2.3 Analog Output Unit (FP2-DA4) 2 - 6....................................

Chapter 3 Wiring

3.1 Suitable Terminals and Wires 3 - 3......................................

3.2 Wiring for Analog Input 3 - 5............................................

3.3 Wiring for Analog Output 3 - 7..........................................

3.4 EMC Conformity 3 - 8.................................................

Chapter 4 Setting the I/O Range and I/O Allocation

4.1 Setting the Input and Output Range 4 - 3................................

4.2 I/O Allocation 4 - 5....................................................

Chapter 5 Initial Settings

5.1 Analog Input Initial Settings 5 - 3........................................

5.2 Analog Output Initial Settings 5 - 6......................................

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Table of Contents FP2 Analog Unit

Chapter 6 Analog I/O Conversion Characteristics and

Conversion Cycle Time

6.1 Analog Input Conversion Characteristics 6 - 3............................

6.2 Analog Output Conversion Characteristics 6 - 11...........................

6.3 Analog Input and Output Conversion Cycle Time 6 - 13....................

Chapter 7 Procedure for Handling Analog Unit

7.1 Outline of Procedure for Handling Analog Unit 7 - 3.......................

7.2 Reading the Analog Input Data 7 - 4.....................................

7.3 Writing the Analog Output Data 7 - 5....................................

Chapter 8 Sample Program for Analog Input

8.1 Basic Program (CPU Unit with Analog I/O) 8 - 3..........................

8.2 Basic Program (Analog Input Unit) 8 - 5..................................

8.3 Scale Conversion Processing Program (CPU Unit with Analog I/O) 8 - 7.....

8.4 Temperature Sensor Input Broken Wire Detection 8 - 9....................

Chapter 9 Sample Program for Analog Output

9.1 Basic Program (Analog Output Unit) 9 - 3................................

Chapter 10 Sample Program for Analog Input Average

Processing Setting

10.1 Sample Program (CPU Unit with Analog I/O) 10 - 3........................

10.2 Sample Program (Analog Input Unit) 10 - 5...............................

Chapter 11 Sample Program of Analog Input Offset Setting

11.1 Sample Program (CPU Unit with Analog I/O) 11 - 3.........................

11.2 Sample Program (Analog Input Unit) 11 - 5................................

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Table of Contents

FP2 Analog Unit

iii

Chapter 12 Sample Program for Analog Output Hold Setting

12.1 Output Hold Setting Basic Program (CPU Unit with Analog I/O) 12 - 3.......

12.2 Output Hold (Any Value) Setting Program 12 - 4..........................

Chapter 13 Troubleshooting

13.1 Problems Concerning the Analog Input 13 - 3.............................

13.2 Problems Concerning the Analog Output 13 - 4...........................

Chapter 14 Specifications

14.1 Table of Performance Specifications 14 - 3...............................

14.2 Table of Input/Output Contact Allocation 14 - 7............................

14.3 Table of Shared Memory Area 14 - 8....................................

14.4 Shared Memory for Analog Input Processing 14 - 13.......................

14.5 Shared Memory of Analog Output Processing 14 - 17......................

Record of changes R-1...................................................

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Precautions Before You Start

About a similar manual

For FP2 Analog Input Unit, there are two manuals, which is for FP2-AD8 (traditional type), and for FP2-

AD8VI, AD8X and RTD (new type).

The appropriate manual must be refered to use each product.

(Two manuals for FP2 Analog Output Unit FP2-DA4 include the same contents.)

Manual Name Manual No. Relevant models

This manual FP2 Analog Unit ARCT1F283 FP2-AD8

New manual FP2 New Analog Unit ARCT1F397 FP2-AD8VI,FP2-AD8X,FP2-RTD

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Chapter 1

Functions and Restrictions

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

FP2 Analog UnitFunctions and Restrictions

1-2

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

FP2 Analog Unit Functions and Restrictions

1-3

1.1 Features

Analog input

16-bit high resolution

High-speed A/D conversion (500µs to 90ms/channel)

Multiple input range (12 types such as voltage, current, and temperature sensor)

Temperature sensor (resistance thermometer device, thermocouple) direct input

possible

Analog output

12-bit resolution

High-speed D/A conversion (500µs/channel)

Dual output range (±10V and 0 to 20mA)

Handling of I/O data

During the processing of the program, the analog input and output data is allocated to

the normal I/O (X and Y) and refreshed.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

FP2 Analog Unit

Functions and Restrictions

1-4

1.2 Type of Unit

Name Function Order number

CPU unit with analog I/O Analog input: 4-channel

Analog output: 1-channel FP2-C1A

Analog input unit Analog input: 8-channel FP2-AD8

Analog output unit Analog output: 4-channel FP2-DA4

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

This manual suits for next models

Table of contents

Other Panasonic Controllers manuals

Panasonic

Panasonic CZ-64ESMC2 User manual

Panasonic

Panasonic DPH-L100 User manual

Panasonic

Panasonic AKHRP900P - CAMERA CONTROLLER HC User manual

Panasonic

Panasonic AW-HHD100E User manual

Panasonic

Panasonic WVCU161C - SYSTEM CONTROLLER User manual

Panasonic

Panasonic FP0-A21 User manual

Panasonic

Panasonic FP-XH Series User manual

Panasonic

Panasonic FP2 Series User manual

Panasonic

Panasonic GM1 Series User manual

Panasonic

Panasonic SFB-HC User manual

Panasonic

Panasonic AG-A571 User manual

Panasonic

Panasonic FPS Series User manual

Panasonic

Panasonic KT4R Use and care manual

Panasonic

Panasonic AFPX-COM5 User manual

Panasonic

Panasonic Minas A4 Series User manual

Panasonic

Panasonic CZ-256ESMC3 User manual

Panasonic

Panasonic WVCU550C - SYSTEM CONTROLLER UNIT User manual

Panasonic

Panasonic FP0 Series User manual

Panasonic

Panasonic AFPX-C30R User manual

Panasonic

Panasonic GM1 Series User manual

Panasonic

Panasonic FP7 Series User manual

Panasonic

Panasonic FP7 Series User manual

Panasonic

Panasonic CZ-256ESMC2U User manual

Panasonic

Panasonic CZ-TACG1 User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual

3M MicroTouch EX113 reference guide

KUHN

KUHN TKS user manual