Ossila UNIT-X200 User manual
USERMANUAL
Manual Version: 2.0.E
Product Code: P2005A
Product Version: 2.0
Firmware Version: 2.4
Software Version: 1.2
SOURCE MEASURE
UNIT–X200
Contents
1. Overview ...................................................................................................4
1.1 Features.......................................................................................................4
2. EU Declaration of Conformity (DoC).................................................5
3. Safety..........................................................................................................8
3.1 Warning........................................................................................................8
3.2 Use of Equipment.....................................................................................8
3.3 Hazard Icons...............................................................................................8
3.4 General Hazards.......................................................................................8
3.5 Power Cord Safety....................................................................................9
3.6 Servicing.......................................................................................................9
3.7 Health and Safety – Servicing................................................................9
4. Software Requirements.......................................................................9
5. Unpacking.............................................................................................. 10
5.1 Packing List ...............................................................................................10
5.2 Damage Inspection................................................................................10
6. Specications........................................................................................ 10
6.1 Specication Conditions.......................................................................10
6.2 Source Measure Units (SMU 1 and SMU 2) ...................................11
6.3 Voltmeter (Vsense1 and Vsense2) ....................................................14
6.4 Measurement Non-Linearity..............................................................14
6.5 Shutter/Trigger.........................................................................................14
6.6 Physical Specications...........................................................................15
7. System Components.......................................................................... 15
8. Installation............................................................................................. 17
8.1 Power On...................................................................................................17
8.2 USB Driver Installation...........................................................................17
8.3 Connecting to a Network.....................................................................18
8.4 Front Panel Software Installation.......................................................18
9. Front Panel Software.......................................................................... 19
9.1 Connection Controls..............................................................................19
9.2 Utility Controls..........................................................................................20
9.3 Front Panel................................................................................................21
9.4 Data Plots...................................................................................................23
9.5 Logged Data .............................................................................................25
9.6 IV Curve......................................................................................................26
10. Advanced Measurements.............................................................. 29
11. Troubleshooting................................................................................ 30
12. Related products............................................................................... 31
12.1 Related Consumables.........................................................................31
12.2 Related Equipment..............................................................................31
4
1. Overview
The Ossila Source Measure Unit (SMU) incorporates two voltage sources for measuring current and two
voltage meters for measuring voltage. With it, you can measure a wide range of research devices including
photovoltaics, LEDs and OLEDs, transistors, and more.
The ability to control instruments is a key skill for experimental scientists and engineers. We have designed
the SMU so that no matter what your skill level is, you can access aordable, precise instrumentation.
1.1 Features
• Dual Source Measure (SMU) channels
• Dual Voltmeter channels
• ±10 V source
• Up to ±200 mA source/sink current per channel
• Five software controlled current ranges (10 nA – 200 mA)
• Shutter control or trigger input
• Serial and I2C extension
• PC software front panel
• USB & Network control
• Simple text-based interface
5
2. EU Declaration of Conformity (DoC)
We
Company Name: Ossila Limited
Postal Address: Solpro Business Park, Windsor Street.
Postcode: S4 7WB
City: Sheeld
Telephone number: +44 (0)114 2999 180
declare that the DoC is issued under our sole responsibility
and belongs to the following product:
Product: Source Measure Unit – X200 (P2005A2)
Serial number: P2005A2-xxxx
Object of declaration:
Source Measure Unit – X200 (P2005A2)
The object of declaration described above is in conformity
with the relevant Union harmonisation legislation:
EMC Directive 2014/30/EU
RoHS Directive 2011/65/EU
Signed:
Name: Dr James Kingsley
Place: Sheeld
Date: 01/10/2018
6
[Декларация] за съответствие на ЕС
Производител: Ossila Ltd., Solpro Business Park, Windsor Street, S4 7WD, Великобритания
Декларира с цялата си отговорност, че посоченото оборудване съответства на приложимото законодателство на ЕС за
хармонизиране, посочено на предходната(-ите) страница(-и) на настоящия документ.
[Čeština] Prohlášení o shodě EU
Výrobce: Ossila Ltd., Solpro Business Park, Windsor Street, S4 7WD, Spojené Království
Prohlašujeme na vlastní odpovědnost, že uvedené zařízeni je v souladu s příslušnými harmonizačními předpisy EU uvedenými na
předchozích stranách tohoto dokumentu.
[Dansk] EU-overensstemme lseserklærin g
Producent: Ossila Ltd., Solpro Business Park, Windsor Street, S4 7WD, UK
Erklærer herved, at vi alene er ansvarlige for, at det nævnte udstyr er i overensstemmelse med den relevante EU-
harmoniseringslovgivning, der er anført på den/de foregående side(r) i dette dokument.
[Deutsch] EU-Konformitätserklärung
Hersteller: Ossila Ltd., Solpro Business Park, Windsor Street, S4 7WD, Vereinigtes Königreich
Wir erklären in alleiniger Verantwortung, dass das aufgeführte Gerät konform mit der relevanten EU-Harmonisierungsgesetzgebung
auf den vorangegangenen Seiten dieses Dokuments ist.
[Eesti keel] ELi vastavusavaldus
Tootja: Ossila Ltd., Solpro Business Park, Windsor Street, S4 7WD, UK
Kinnitame oma ainuvastutusel, et loetletud seadmed on kooskõlas antud dokumendi eelmisel lehelküljel / eelmistel lehekülgedel ära
toodud asjaomaste ELi ühtlustamise õigusaktidega.
[Ελληνικά] Δήλωση πιστότητας ΕΕ
Κατασκευαστής: Ossila Ltd., Solpro Business Park, Windsor Street, S4 7WD, Ηνωμένο Βασίλειο
Δηλώνουμε υπεύθυνα όn ο αναφερόμενος εξοπλισμός συμμορφώνεται με τη σχεnκή νομοθεσία εναρμόνισης της ΕΕ που υπάρχει
σnς προηγούμενες σελίδες του παρόντος εγγράφου.
[Español] Declaración de conformidad UE
Fabricante: Ossila Ltd., Solpro Business Park, Windsor Street, S4 7WD, Reino Unido
Declaramos bajo nuestra única responsabilidad que el siguiente producto se ajusta a la pertinente legislación de armonización de la
UE enumerada en las páginas anteriores de este documento.
[Français] Déclaration de conformité UE
Fabricant: Ossila Ltd., Solpro Business Park, Windsor Street, S4 7WD, Royaume-Uni
Déclarons sous notre seule responsabilité que le matériel mentionné est conforme à la législation en vigueur de l’UE présentée sur la/
les page(s) précédente(s) de ce document.
[Hrvatski] E.U izjava o sukladnosti
Proizvođač: Ossila Ltd., Solpro Business Park, Windsor Street, S4 7WD, Velika Britanija
Izjavljujemo na vlastitu odgovornost da je navedena oprema sukladna s mjerodavnim zakonodavstvom EU-a o usklađivanju koje je
navedeno na prethodnoj(nim) stranici(ama) ovoga dokumenta.
[Italiano] Dichiarazione di conformità UE
Produttore: Ossila Ltd., Solpro Business Park, Windsor Street, S4 7WD, UK
Si dichiara sotto la propria personale responsabilità che l’apparecchiatura in elenco è conforme alla normativa di armonizzazione UE
rilevante indicata nelle pagine precedenti del presente documento.
[Latviešu] ES atbils tības deklarācija
Ražotājs: Ossila Ltd., Solpro Business Park, Windsor Street, S4 7WD, UK
Ar pilnu atbilclību paziņojam, ka uzskaitītais aprīkojums atbilst attiecīgajiem ES saskaņošanas tiesību aktiem, kas minēti iepriekšējās šī
dokumenta lapās.
7
[Lietuvių k.] ES atitikties deklaracija
Gamintojas: Ossila Ltd., Solpro Business Park, Windsor Street, S4 7WD, UK
atsakingai pareiškia, kad išvardinta įranga atitinka aktualius ES harmonizavimo teisės aktus, nurodytus ankstesniuose šio dokumento
[Magyar] EU-s megfelelőségi nyilatkozat
Gyártó: Ossila Ltd., Solpro Business Park, Windsor Street, S4 7WD, UK
Kizárólagos felelősségünk mellett kijelentjük, hogy a felsorolt eszköz megfelel az ezen dokumentum előző oldalán/oldalain található
EU-s összehangolt jogszabályokra vonatkozó rendelkezéseinek.
[Nederlands] EU-Conformiteitsverklaring
Fabrikant: Ossila Ltd., Solpro Business Park, Windsor Street, S4 7WD, UK
Verklaart onder onze uitsluitende verantwoordelijkheid dat de vermelde apparatuur in overeenstemming is met de relevante
harmonisatiewetgeving van de EU op de vorige pagina(‘s) van dit document.
[Norsk] EU-samsvarserklæ ring
Produsent: Ossila Ltd., Solpro Business Park, Windsor Street, S4 7WD, UK
Erklærer under vårt eneansvar at utstyret oppført er i overholdelse med relevant EU-harmoniseringslavverk som står på de(n) forrige
siden(e) i dette dokumentet.
[Polski] Deklaracja zgodności Unii Europejskiej
Producent: Ossila Ltd., Solpro Business Park, Windsor Street, S4 7WD, UK
Oświadczamy na własną odpowiedzialność, że podane urządzenie jest zgodne ze stosownymi przepisami harmonizacyjnymi Unii
Europejskiej, które przedstawiono na poprzednich stronach niniejszego dokumentu.
[Por tuguês] Declaração de Conformidade UE
Fabricante: Ossila Ltd., Solpro Business Park, Windsor Street, S4 7WD, Reino Unido
Declara sob sua exclusiva responsabilidade que o equipamento indicado está em conformidade com a legislação de harmonização
relevante da UE mencionada na(s) página(s) anterior(es) deste documento.
[Română] Declaraţie de conformitate UE
Producător: Ossila Ltd., Solpro Business Park, Windsor Street, S4 7WD, Regatul Unit
Declară pe proprie răspundere că echipamentul prezentat este în conformitate cu prevederile legislaţiei UE de armonizare aplicabile
prezentate la pagina/paginile anterioare a/ale acestui document.
[Slovensky] Vyhlásenie o zhode pre EÚ
Výrobca: Ossila Ltd., Solpro Business Park, Windsor Street, S4 7WD, Spojené kráľovstvo
Na vlastnú zodpovednosť prehlasuje, že uvedené zariadenie je v súlade s príslušnými právnymi predpismi EÚ o harmonizácii
uvedenými na predchádzajúcich stranách tohto dokumentu.
[Slovenščina] Izjava EU o skladnosti
Proizvajalec: Ossila Ltd., Solpro Business Park, Windsor Street, S4 7WD, UK
s polno odgovornostjo izjavlja, da je navedena oprema skladna z veljavno uskladitveno zakonodajo EU, navedeno na prejšnji strani/
prejšnjih straneh tega dokumenta.
[Suomi] EU-vaatimustenm ukaisuusvakuutus
Valmistaja: Ossila Ltd., Solpro Business Park, Windsor Street, S4 7WD, UK
Vakuutamme täten olevamme yksin vastuussa siitä, että tässä asiakirjassa luetellut laitteet ovat tämän asiakirjan sivuilla edellisillä
sivuilla kuvattujen olennaisten yhdenmukaistamista koskevien EU-säädösten vaatimusten mukaisia.
[Svenska] EU-försäkran om överensstämmelse
Tillverkare: Ossila Ltd., Solpro Business Park, Windsor Street, S4 7WD, Storbritannien
Vi intygar härmed att den utrustning som förtecknas överensstämmer med relevanta förordningar gällande EU-harmonisering som
fmns på föregående sidor i detta dokument.
8
3. Safety
3.1 Warning
• Do NOT connect external voltage sources to either SMU channel.
• The absolute maximum input voltage for the Vsense channels is ±12 V. DO NOT apply
input while not powered.
3.2 Use of Equipment
The Ossila Source Measure Unit is designed to be used as instructed. It is intended for use under the
following conditions:
• Indoors in a laboratory environment (Pollution Degree 2)
• Altitudes up to 2000m
• Temperatures of 5°C to 40°C; maximum relative humidity of 80% up to 31°C.
The unit is supplied with a 24 VDC / 2A power adapter with a power cord for the country of purchase, in
accordance with European Commission regulations and British Standards. Use of any other electrical power
cables, adaptors, or transformers is not recommended.
3.3 Hazard Icons
The following symbols can be found at points throughout the manual. Note and read each warning before
attempting any associated operations associated with it:
Table 3.1. Hazard warning labels used in this manual.
Symbol Associated Hazard
Electrical shock
3.4 General Hazards
Before installing or operating the Ossila Source Measure Unit, there are several health and safety
precautions which must be followed and executed to ensure safe installation and operation.
9
3.5 Power Cord Safety
3.7 Health and Safety – Servicing
4. Software Requirements
3.6 Servicing
Table 4.1. Ossila Front Panel requirements.
Emergency power disconnect options: use the power cord as a disconnecting method
and remove from wall. To facilitate disconnect, make sure the power outlet for this cord is
readily accessible to the operator.
Servicing should only be performed by an Ossila engineer. Any modication or
alteration may damage the equipment, cause injury, or death. It will also void your
equipment’s warranty.
If servicing is required, please return the unit to Ossila Ltd. The warranty will be invalidated if:
• Modication or service has been carried out by anyone other than an Ossila engineer.
• The unit has been subjected to chemical damage through improper use.
• The unit has been operated outside the usage parameters stated in the user documentation
associated with the unit.
• The unit has been rendered inoperable through accident, misuse, contamination, improper
maintenance, modication, or other external causes.
The Ossila SMU is compatible with our Front Panel software which is included with the system. It allows for
simple operation of the SMU and precision voltmeter channels.
Table 4.1 details the minimum computer specications for the Ossila Front Panel software
Operating System Windows 10
CPU Dual-core 2 GHz
RAM 2 GB
Hard Drive Space 100 MB
Connectivity USB 2.0 or newer, Ethernet
10
5.1 Packing List
The standard items included with the Ossila Source Measure Unit are:
• The Ossila Source Measure Unit.
• 24 VDC / 2 A DC power adapter with a cord set specically for country of operation
(plug type A, F, G, or I).
• USB-B cable.
• USB memory stick pre-loaded with the user manual, USB drivers, QC data, and software
Front Panel installer.
• Printed copy of the user manual.
The Ossila Source Measure Unit contains four channels: two source measure units (SMUs) and two precision
voltmeters. There is also a general-purpose shutter/trigger to allow other instruments to be controlled or
control the unit.
6. Specications
5. Unpacking
5.2 Damage Inspection
6.1 Specication Conditions
Examine the components for evidence of shipping damage. If damage has occurred, please contact Ossila
directly for further action. The shipping packaging will come with a shock indicator to show if there has been
any mishandling of the package during transportation.
The specications and information in this document are for the Ossila Source Measure Unit. All units meet
these standard specications when dispatched to the end-user.
The accuracy of both source and measurement of the unit are specied under the following conditions:
• Ambient temperature of 23 °C ± 5 °C, < 60% relative humidity.
• After a 30-minute warm-up period.
• Default measurement speed (OSR 5) unless specied.
• No lter.
Table of contents
Other Ossila Measuring Instrument manuals
