Opitec Hobbyfix Cube User manual

D108465#2

Please Note

The OPITEC range of projects is not intended as play toys

for young children.They are teaching aids for young people

learning the skills of Craft, Design and Technolo- gy.These

projects should only be undertaken and tested with the

guidance of a fully qualified adult. The finished projects are

not suitable to give to children under 3 years old. Some

parts can be swallowed. Dan- ger of suffocation!

108.465

„Cube“

Labyrinth in 3 layers

(acrylic )

Parts list

Quantity Size(mm) Description Part No

Acrylglasstreifen 2 2x90x190 layers 1

Pine strip 6 10x20x250 frame , labyrinth 2

Steel ball 1 ø10 3

Necessary tools

Pencil, ruler

Wood glue

Fine saw, mitre block

Pillar drill 15mm diameter.

Sand paper / wet dry paper

Warning!

This product con-

tains small parts that

can be swallowed

There is a danger of

choking

2D108465#1

Instructions

1. General: Using the materials given the cube can be made to the instructions or your own design ( The full size

patterns are on page 5 )

Note:

The holes are 10mm diameter. The pine strips for the labyrinth must have a gap of 11mm.

2. Check the design for your labyrinth carefully before starting to cut any wood.

Make up a cutting list for the pine strips.

3. Mark out and saw four squares 90 x 90 mm from the acrylic ( See diagram 3 )

4. Mark out the position of the hole on the acrylic sheet. 1

5. Drill the 15mm hole with a pillar drill ( Drill in two steps rst use a smaller drill )

(Please take care to adhere to the safety rules when drilling and use a scrap piece of wood as an underlay)

Note!

You can drill both top and bottom holes at once. The position of the second hole is marked on the plan with a bro-

ken line.

6. Cut the pine strip according to your list ( Take care with the quantity of material supplied )

7. Sand the pine strips

8. Glue the strips on the acrylic ( See diagram 3+4 ) Use UHU all purpose

or a similar glue

Note!

Take care with the position of the holes

9. Once dry you can assemble and glue the layers together. The best way is layer 2 with layer 3 & then layer 1 with the

lid. Leave to dry and then glue layer 1 to layer 2

Hinweis: Position der einzelnen Ebenen beachte, dass nicht 2 Bohrungen übereinander liegen!

10. Den Cube außen versäubern und evtl. die Holzäche mit Lack, Wachs usw. behandeln.

Viel Spaß mit dem Labyrinth-Cube!

Layer 1

Lid Layer 2

Layer 3

D108465#2

18,5

Ø 15

Lid and bottom for all the layers

Layer 1

4D108465#1

20 50

Layer 2

Layer 3

D108465#2

Anlage 1

Note:The patterns have 10x 10mm squares! Make sure that the labyrinth strips have a space of 11mm and that the holes in the

layers are not larger than 10mm diameter.

Stückliste:

This manual suits for next models

Table of contents

Other Opitec Toy manuals

Opitec

Opitec 116415 User manual

Opitec

Opitec 111.714 User manual

Opitec

Opitec 102.320 Nummer II User manual

Opitec

Opitec Hobbyfix Stiletto 105.755 User manual

Opitec

Opitec Floating Ball User manual

Opitec

Opitec 117167 User manual

Opitec

Opitec Easy-Line Wind Generator User manual

Opitec

Opitec Recycling Rowing Boat User manual

Opitec

Opitec Hobbyfix 113.727 User manual

Opitec

Opitec Wind Machine User manual

Opitec

Opitec Hobbyfix User manual

Opitec

Opitec Hobbyfix 101.706 User manual

Opitec

Opitec 113.141 User manual

Opitec

Opitec MANITOU 101.200 User manual

Opitec

Opitec 120.852 User manual

Opitec

Opitec Solar Auto with gearbox User manual

Opitec

Opitec Dragonfly 102.894 User manual

Opitec

Opitec Windflyer II User manual

Opitec

Opitec Running worker with wheelbarrow User manual

Opitec

Opitec Wasp User manual

Opitec

Opitec Rattle Snake User manual

Opitec

Opitec 112.994 User manual

Opitec

Opitec Hobbyfix Cloud User manual

Opitec

Opitec 104.689 User manual

Popular Toy manuals by other brands

marklin

marklin 37321 instruction manual

Canon

Canon PAPER CRAFT Assembly instructions

GREAT PLANES

GREAT PLANES Pitts M-12S instruction manual

NOCH

NOCH 14261 manual

Hausler

Hausler 450 SE V2 quick start

Dynaflite

Dynaflite Daydream instruction manual

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Build instructions

Kenner

Kenner Batman 63651 instructions

LEGO

LEGO 8527 instructions

iKarus

iKarus ECO 8 Assembly instruction

Multiplex

Multiplex EasyStar II Building instructions

Walkera

Walkera 38 User handbook

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE manual

MD MXION SWD user manual

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway instructions

marklin

marklin 39671 user manual

Meccano

Meccano 15103 instructions

LEGO

LEGO TECHNIC 8735 instructions