Opitec 116415 User manual

116415

3D Hologram Maker with USB

PARTS LIST Quantity Size (mm) Description Part No.

Wooden strip 2 250x30x5 Frame 1

Wooden strip 2 250x5x5 Frame 2

USB-cable 1Cable 3

Plywood board 1 110x110x5 Base 4

PVC foil 1 DIN A4 Cover & prism 5

LED light strip 1 LED 6

Cable, black 1Wiring 7

Cable, red 1Wiring 8

Wire connectors 1Wiring 9

Drawing pins 8Wiring 10

Tools required:

Please Note

The OPITEC range of projects is not intended as play toys for young child-

ren. They are teaching aids for young people learning the skills of Craft,

Design and Technology. These projects should only be undertaken and

operated with the guidance of a fully qualiﬁed adult. The ﬁnished projects

are not suitable to give to children under 3 years old. Some parts can be

swallowed. Danger of suocation!

Sticking Tape Scissors RulerCraft knife

Jigsaw Wood glue Side cutterSandpaper

Pencil Centre punch Screwdriver

1 2

4 5

Instructions 116.415 Hologram

Transfer dimensions on to wooden strip (1). Cut two pieces (115x30mm)

from each length of wood. Tidy up the ends.

Cut a recess (10x5mm) from one of the strips.

Transfer dimensions on to wooden strip (2). Cut two pieces (105x5mm) from each length of wood. Tidy up the ends.

Glue a wooden strip (2) to each of the wooden strips (1), using the

measurements shown.

Glue the four sides to the base (4) as shown to create a frame. Let the

glue dry thoroughly.

6 7

8 9

10 11

Instructions 116.415 Hologram

Divide the four LEDs as shown. Cut o the positive pole on one side of

each LED and the negative pole on the opposite side (see illustration).

Cut out the templates (page 9) to position the LEDs and place them in

the frame. Mark their position with the centre punch. Glue the LEDs to

the 4 marked position. Pay attention to the poles!

Strip the insulation o the USB cable (3) at approx. 4 cm. The red and

black cables are ‘+’ and ‘-‘. Cut o the two other cables at the insulati-

on. Feed the USB cable (3) through the opening in the frame. Knot the

cable on the inside of the frame, so that it can’t slip out.

Connect the wire connectors (9) to the ends of the USB cables as

shown.

Cut o 4 pieces (approx. 100mm) of red wire (8) and strip 10mm o

the insulation on both ends. Connect one of each ends through the

wire connectors with the black wire from the USB cable as shown.

Connect the other end to the positive poles of the LEDs.

Note:

wind the cable ends

around a drawing pin

(10) and stick into the

+pole. Make sure that

the drawing pin does not

go through the base!

Cut o 4 pieces (approx. 100mm) of black wire (7) and strip 10mm o

the insulation on both ends. Connect one of each ends through the

wire connectors with the black wire from the USB cable as shown.

Connect the other end to the negative poles of the LEDs.

Note:

wind the cable ends 4-5

times around a drawing

pin (10) and stick into

the -pole. Make sure

that the drawing pin

does not go through the

base!

12 13

14 15

Cut out foil piece A from the PVC foil (5) as per template. Insert foil A

into the frame as shown.

Instructions 116.415 Hologram

Print out the instructions on www.uk.opitec.com in colour. Cut out

one of the pictures (page 6) and place it on the foil. Alternatively you

can use your own designs: using an image processing program, draw

a 110x110mm frame. Place your chosen picture on a black background

and reduce the size. Copy the picture four times. The pictures have to

be identical and of identical size. Place at the same distance, but rotate

by 90°.

Fix the template to the rest of the foil with sticking tape and cut out.

Building the prism:

Score the lines of the three segments with a craft knife or a pair of

scissors as shown in the template.

Fold all four sides to the inside, so that they form a prism. Hold the

free ends in place with sticking tape.

Place the prism on to the hologram maker and connect the USB cable

to a source of electricity.

Instructions 116.415 Hologram

Template PVC Foil

Scale 1:1

Instructions 116.415 Hologram

Templates

Instructions 116.415 Hologram

Templates

Templates for LED placement

Scale 1:1

Other Opitec Toy manuals

Opitec

Opitec Running worker with wheelbarrow User manual

Opitec

Opitec 102.320 Nummer II User manual

Opitec

Opitec 114.066 User manual

Opitec

Opitec Wind Machine User manual

Opitec

Opitec Dragonfly 102.894 User manual

Opitec

Opitec Rattle Snake User manual

Opitec

Opitec Windflyer II User manual

Opitec

Opitec Hobbyfix Flip User manual

Opitec

Opitec Easy-Line Wind Generator User manual

Opitec

Opitec Floating Ball User manual

Opitec

Opitec 115.305 User manual

Opitec

Opitec 120.852 User manual

Opitec

Opitec 111.714 User manual

Opitec

Opitec Wasp User manual

Opitec

Opitec 104.689 User manual

Opitec

Opitec Hobbyfix Stiletto 105.755 User manual

Opitec

Opitec Hobbyfix 101.706 User manual

Opitec

Opitec Hobbyfix Cube User manual

Opitec

Opitec MANITOU 101.200 User manual

Opitec

Opitec 112.994 User manual

Opitec

Opitec Hobbyfix 113.727 User manual

Opitec

Opitec Recycling Rowing Boat User manual

Opitec

Opitec Hobbyfix User manual

Opitec

Opitec Hobbyfix Cloud User manual

Popular Toy manuals by other brands

marklin

marklin 37321 instruction manual

Canon

Canon PAPER CRAFT Assembly instructions

GREAT PLANES

GREAT PLANES Pitts M-12S instruction manual

NOCH

NOCH 14261 manual

Hausler

Hausler 450 SE V2 quick start

Dynaflite

Dynaflite Daydream instruction manual

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Build instructions

Kenner

Kenner Batman 63651 instructions

LEGO

LEGO 8527 instructions

iKarus

iKarus ECO 8 Assembly instruction

Multiplex

Multiplex EasyStar II Building instructions

Walkera

Walkera 38 User handbook

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE manual

MD MXION SWD user manual

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway instructions

marklin

marklin 39671 user manual

Meccano

Meccano 15103 instructions

LEGO

LEGO TECHNIC 8735 instructions