OHAUS TD32PE User manual
i
3000 Series Indicators
Instruction Manual
TD32PE Indicator
ii
EN-13000 Series Indicators
TABLE OF CONTENTS
1. INTRODUCTION..........................................................................................................................................EN-4
1.1 Definition of Signal Warnings and Symbols...................................................................................................EN-4
1.2 Safety Precautions .....................................................................................................................................EN-4
1.3 Overview of Parts and Controls ...................................................................................................................EN-5
1.4 Control Functions.......................................................................................................................................EN-8
2. INSTALLATION ...........................................................................................................................................EN-9
2.1 Unpacking ................................................................................................................................................EN-9
2.2 External Connections..................................................................................................................................EN-9
2.2.1 Scale Base to Indicator ....................................................................................................................EN-9
2.2.2 AC Power to Indicator ......................................................................................................................EN-9
2.2.3 Battery power to Indicator ...............................................................................................................EN-10
2.2.4 RS232 Interface Cable to Indicator (Optional)....................................................................................EN-10
2.3 Internal Connections.................................................................................................................................EN-11
2.3.1 Opening the Housing.......................................................................................................................EN-11
2.3.2 Jumper Connections .......................................................................................................................EN-11
3. SETTINGS................................................................................................................................................EN-12
3.1 Menu Structure ........................................................................................................................................EN-12
3.2 Menu Navigation .....................................................................................................................................EN-13
3.3 Calibration Menu .....................................................................................................................................EN-13
3.3.1 Zero Calibration ............................................................................................................................EN-13
3.3.2 Span Calibration...........................................................................................................................EN-14
3.3.3 Linearity Calibration ......................................................................................................................EN-14
3.3.4 Geographical Adjustment Factor .....................................................................................................EN-15
3.3.5 End Calibration.............................................................................................................................EN-15
3.4 Setup Menu.............................................................................................................................................EN-17
3.4.1 Reset...........................................................................................................................................EN-17
3.4.2 Capacity ......................................................................................................................................EN-17
3.4.3 Graduation...................................................................................................................................EN-19
3.4.4 Power On Unit ..............................................................................................................................EN-19
3.4.5 Zero Range ..................................................................................................................................EN-19
3.4.6 End Setup ....................................................................................................................................EN-19
EN-2 3000 Series Indicators
TABLE OF CONTENTS (Cont.)
3.5 Readout Menu.........................................................................................................................................EN-19
3.5.1 Reset...........................................................................................................................................EN-19
3.5.2 Stable Range................................................................................................................................EN-20
3.5.3 Filter............................................................................................................................................EN-20
3.5.4 Auto-Zero Tracking........................................................................................................................EN-20
3.5.5 Sleep...........................................................................................................................................EN-20
3.5.6 Light ...........................................................................................................................................EN-20
3.5.7 Auto Off .......................................................................................................................................EN-20
3.5.8 Expand........................................................................................................................................EN-20
3.5.9 End Readout ................................................................................................................................EN-20
3.6 Mode Menu.............................................................................................................................................EN-21
3.6.1 Reset...........................................................................................................................................EN-21
3.6.2 Parts Counting Mode.....................................................................................................................EN-21
3.6.3 End Mode ....................................................................................................................................EN-21
3.7 Unit Menu ...............................................................................................................................................EN-21
3.7.1 Reset...........................................................................................................................................EN-21
3.7.2 Kilogram Unit ...............................................................................................................................EN-21
3.7.3 Gram Unit ....................................................................................................................................EN-21
3.7.4 Pound Unit...................................................................................................................................EN-22
3.7.5 End Unit ......................................................................................................................................EN-22
3.8 Print Menu ..........................................................................................................................................EN-22
3.8.1 Reset...........................................................................................................................................EN-22
3.8.2 Baud...........................................................................................................................................EN-22
3.8.3 Parity ..........................................................................................................................................EN-22
3.8.4 Stop Bit .......................................................................................................................................EN-23
3.8.5 Handshake ..................................................................................................................................EN-23
3.8.6 Stable Only ..................................................................................................................................EN-23
3.8.7 Auto Print.....................................................................................................................................EN-23
3.8.8 Content........................................................................................................................................EN-23
3.8.9 Layout.........................................................................................................................................EN-24
3.8.10 End Print .....................................................................................................................................EN-24
EN-33000 Series Indicators
TABLE OF CONTENTS (Cont.)
3.9 Security Switch ........................................................................................................................................EN-25
4. OPERATION.............................................................................................................................................EN-25
4.1 Turning Indicator On/Off............................................................................................................................EN-25
4.2 Zero Operation.........................................................................................................................................EN-25
4.3 Manual Tare............................................................................................................................................EN-25
4.4 Changing Units of Measure .......................................................................................................................EN-26
4.5 Printing Data...........................................................................................................................................EN-26
4.6 Application Modes ...................................................................................................................................EN-26
4.6.1 Weighing.....................................................................................................................................EN-26
4.6.2 Parts Counting .............................................................................................................................EN-26
4.6.3 Totalization ..................................................................................................................................EN-27
5. SERIAL COMMUNICATION..........................................................................................................................EN-28
5.1 Interface Commands ................................................................................................................................EN-28
5.2 Output Format .........................................................................................................................................EN-28
5.3 Printout Examples....................................................................................................................................EN-29
6. LEGAL FOR TRADE ...................................................................................................................................EN-30
6.1 Settings ..................................................................................................................................................EN-30
6.2 Verification..............................................................................................................................................EN-30
7. MAINTENANCE.........................................................................................................................................EN-31
7.1 Cleaning.................................................................................................................................................EN-31
7.2 Troubleshooting.......................................................................................................................................EN-31
7.3 Service Information ..................................................................................................................................EN-31
8. TECHNICAL DATA.....................................................................................................................................EN-31
8.1 Specifications..........................................................................................................................................EN-31
8.2 Accessories.............................................................................................................................................EN-32
8.3 Drawings and Dimensions........................................................................................................................EN-33
8.4 Compliance.............................................................................................................................................EN-34
EN-4 3000 Series Indicators
1. INTRODUCTION
This manual contains installation, operation and maintenance instructions for the TD32PE indicator. Please read this manual
completely before installation and operation.
Safety notes are marked with signal words and warning symbols. These show safety issues and warnings. Ignoring the safety
notes may lead to personal injury, damage to the instrument, malfunctions and false results.
Signal Words
CAUTION For a hazardous situation with low risk, resulting in damage to the device or the property or in loss
of data, or injuries if not avoided.
Attention For important information about the product
Note For useful information about the product
Warning Symbols
General Hazard Electrical Shock Hazard
1.2
Safety
Precautions
•VerifythattheACadapter’sinputvoltagerangeandplugtypearecompatiblewiththelocalACpowertobeused.
•Makesurethatthepowercorddoesnotposeapotentialobstacleortrippinghazard.
•Donotpositiontheindicatorsuchthatitisdifficulttoreachthepowerconnection.
•Theindicatorisforindooruseonly.
•Usetheindicatoronlyindrylocations.
•Useonlyapprovedaccessoriesandperipherals.
•Operatetheequipmentonlyunderambientconditionsspecifiedintheseinstructions.
•Disconnecttheequipmentfromthepowersupplybeforecleaning.
•Donotoperatetheequipmentinhazardousorunstableenvironments.
Forsafeanddependableoperationofthisequipment,pleasecomplywiththefollowingsafetyprecautions:
1.1 Definition of Signal Warnings and Symbols
EN-53000 Series Indicators
1.3 Overview of Parts and Controls
Figure 1-1. TD32PE Indicator.
Item Description
1 Front Housing
2 Control Panel
3 Power Receptacle
4 Load Cell Cable Connector
5 RS232 Connector (optional)
6 Data Label
7 FCC Information
8 Rear Housing
9 Mounting Track
10 Screw (4)
11 Security Screw
TABLE 1-1. TD32PE PARTS.
7
8
9
10
6
345
11
EN-6 3000 Series Indicators
1.3 Overview of Parts and Controls (Cont.)
Item Description
1 Power Connector J1
2 Battery Connector J9
3 Option Connector J2
4 LFT Switch
5 4-6 Lines Sense Jumper W1 (located on the other side of PCB)
6 Load Cell Connector J4
7 4-6 Lines Sense Jumper W2 (located on the other side of PCB)
TABLE 1-2. MAIN PC BOARD.
Figure 1-2. Main PC Board.
EN-73000 Series Indicators
1.3 Overview of Parts and Controls (Cont.)
No. Designation
1 Pound, Kilogram, Gram symbols
2 Battery function symbol
3 TARE
Menu
button
4 FUNCTION
Mode
button
5 Accumulation Symbol
6 NET function symbol
7 PRINT
Units
button
8 PCS function symbol
9 Stable weight Symbol
10 ON/ZERO
Off
button
11 Center of Zero Indicator
Figure 1-3. Controls and Indicators.
TABLE 1-3. CONTROL PANEL.
EN-8 3000 Series Indicators
1.4
Control
Functions
Button
Primary Function
(Short Press)
ON/ZERO
If Indicator is On, sets
zero.
PRINT
Sends the current value
to the COM port if
AUTOPRINT is set to Off.
FUNCTION
Initiates an application
mode.
TARE
Performs a tare
operation.
Secondary Function
(Long Press)
Off
Turns the Indicator on
or off.
Units
Changes the weighing
Unit.
Mode
Allows changing the
application mode.
Press and hold allows
scrolling through modes.
Menu
Enter the User menu.
Menu Function
(Short Press)
Yes
Accepts the current
setting on the display.
No
Advances to the next
menu or menu item.
Rejects the current
setting on the display
and advances to the
next available setting.
Increments the value.
Back
Moves Back to previous
menu item.
Decrements the value.
Exit
Exits the User menu.
Aborts the calibration in
progress.
TABLE 1-4. CONTROL FUNCTIONS.
On/Zero
Off
Yes
Print
Units
No
Function
Mode
Back
Tare
Menu
Exit
This manual suits for next models
1
Table of contents
Other OHAUS Measuring Instrument manuals
OHAUS
OHAUS Defender 3000 User manual
OHAUS
OHAUS T51XW User manual
OHAUS
OHAUS T31P User manual
OHAUS
OHAUS starter 3100 User manual
OHAUS
OHAUS AB23PH User manual
OHAUS
OHAUS ST Series User manual
OHAUS
OHAUS ST20C-A User manual
OHAUS
OHAUS CD-1 User manual
OHAUS
OHAUS MB90 User manual
OHAUS
OHAUS AB23PH User manual
OHAUS
OHAUS ST300D-B User manual
OHAUS
OHAUS MB90 User manual
OHAUS
OHAUS TD52 User manual
OHAUS
OHAUS TD52 User manual
OHAUS
OHAUS ST20M Series User manual
OHAUS
OHAUS ST20C-A User manual
OHAUS
OHAUS ST20D User manual
OHAUS
OHAUS Ranger 3000 Series User manual
OHAUS
OHAUS CKW Series User manual
OHAUS
OHAUS STARTER 5000 User manual
