Nexvoo NexBar N110 User manual
NexBar N110· User Guide
1. NexBar camera and speakerphone unit
2. Power adapter
3. Wall mounting bracket
4. 5m USB-C cable
5. Wall mounting hardware
6. Remote control
7. Documentation
Package Includes
NexBar N110· User Guide
1. Camera
2 .LED light indicators
3 .Base bracket
4 .Security slot
5 .USB-A，for connecting external extension devices
6 .Bluetooth key
7 .USB-C，for connecting PC computers
8 .Power
NexBar N110 Introduction
1. The device is paired successfully
2. Turn off or turn on the AI function
LED indicator status
When the green light is on the camera is working, and when the red light is on the
camera is off.
The device is in mute state When the red light flashes slowly the N110 is in mute state.
When the green light flashes slowly, the N110 is in the Bluetooth searching state
When the green light flashes fast
The following figure and table identify the functions of the keys on the
remote control.
Remote Control Features
.
.
.
.
.
.
.
.
Connection with Bluetooth remote control
N110 will automatically perform Bluetooth search after power-on. If the remote control
is found, the pairing connection will be automatically performed. If the remote control
is not found within 3 minutes, the search will be stopped. Please short press the
Bluetooth button of the device to restart the search.
If N110 has been paired with the remote control, you can press the Bluetooth button
for 3 seconds to delete the pairing information.After deleting the pairing information,
you can pair and connect with the new remote control.
If N110 has been paired but failed to connect with the remote control successfully,
short press the Bluetooth button to make the device search for the remote control again.
1. Microphone mute
2. Preset 1
3. Preset 2
4. Adjust Camera view
5. Volume up/down
6. Zoom in/out
7. Speaker tracking on/off
Note: Only after turning off the AI function, you can use the remote control to adjust camera view and
zoom in or out the focal length;
8.BLE auto connect
LED indicator status
When the red light is on for 3 seconds
1. Power on the remote control
2. Press and hold the Bluetooth button for 3 seconds to clear the pairing information
3. The remote control is paired and connected
Connection with N110
The powered on remote control will be automatically paired with the NexBar N110.If it is not
paired successfully, please short press the Bluetooth button of NexBar N110 and remote control
to pair and connect again.
If the remote control is paired, you can press the Bluetooth button for 3 seconds to delete the
pairing information. After deleting the pairing information,the remote can be paired with the new
N110 again.
The remote control is paired but not connected to the N110. After 5 seconds, it enters the
sleep state. Please press any key to wake up the remote control and reconnect it.
The remote control can only be paired and connected by one N110
.
.
.
.
Placement
b. Attach the camera to the bracket.
We recommend placing the camera as close to eye level as possible.
You can get the best performance.
1. Placement on table：
Place on a table or shelf near the monitor.
2. Mount on the wall:
a. Attach bracket to the wall.
Please use the screws which are in the box or appropriate type of screws for your wall
type.
3. Place on or under display:
Adjust the equipment angle to make all participants in the picture
Please contact us to choose Nexvoo optional accessory
Connecting NexBar N110 is the same whether you plan on using a dedicated PC or
Mac in the room, or your team members bring a laptop to the room to run the meeting.
This is normal setup step as below, may have a little different depends on your device.
1. Plug N110 into power.
2. Connect the USB-C cable from N110 to your PC or Mac.
Connection
3. If you need to cast a screen, please connect your PC computer or Mac to the display
via HDMI or RGB cable
4. Diagram of all connections.
5. Enter your software settings, then find audio and video equipment.
Select Nexvoo N110 as the default device and click “Save”.
After installing NexBar N110 and ensuring it is the default device in your video
conferencing application, simply start the application in the normal manner and enjoy
the benefits of improved audio and video.
Please go to www.nexvoo.com if you want to learn more.
Starting A Video Call
1. Operating Ambient Temperatures
2. Warranty
3. Explanation Of The Symbols DC
Operating temperature: +32 to 104°F (0 to 40°C)
Storage temperature: -13 to +160°F (-25 to +70°C)
Relative humidity: 5% to 90%, non-condensing
·
·
·
·
·
·
·
·
·
Symbol is the DC voltage symbol.
WEEE Warning symbol
Our product warranty is limited only to the unit itself, when used normally in accordance with the
operating instructions and the system environment. We are not liable for damage or loss resulting
from the use of this product, or for any claim from a third party. We are not liable for problems with
Nexvoo device arising from the use of this product; we are not liable for financial damages, lost profits,
claims from third parties, etc., arising from the use of this product.
To avoid the potential effects on the environment and human health as a result of the presence of
hazardous substances in electrical and electronic equipment, end users of electrical and electronic
equipment should understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of
WEEE as unsorted municipal waste and have to collect such WEEE separately.
Regulatory Notices
General Requirements
Before you install and use the device, read the safety instructions carefully and observe the situation
during operation.
During the process of storage, transportation, and operation, please always keep the device dry and
clean, avoid collision and crash.
Please attempt not to dismantle the device by yourself. In case of any discrepancy, please contact the
appointed maintenance center to repair.
Please refer to the relevant laws and statutes while using the device. Legal rights of others should be
respected as well.
5. Safety Instructions
Save these instructions. Read these safety instructions before use!
4. Restriction Of Hazardous Substances Directive (ROHS)
This device complies with the requirements of the EU ROHS Directive.
Statements of compliance can be obtained by contacting [email protected].
·
·
·
·
Environmental Requirements
Place the device at a well-ventilated place. Do not expose the device under direct sunlight.
Keep the device dry and free of dusts.
Do not place the device on or near any inflammable or fire-vulnerable object, such as rubber-made
materials.
Keep the device away from any heat source or bare fire, such as a candle or an electric heater.
6. Troubleshooting
Q: The unit cannot supply power to Nexvoo device.
A1: There is a bad connection with the plug.
⑴ Clean the plug with a dry cloth.
⑵ Connect it to another wall outlet.
Operating Requirements
Do not let a child operate the device without guidance.
Do not let a child play with the device or any accessory in case of accidental swallowing.
Please use the accessories provided or authorized by the manufacturer only.
Please use the provided surge protection power socket only.
Before plugging or unplugging any cable, make sure that your hands are completely dry.
Do not spill liquid of any kind on the product or use the equipment near water, for example, near a
bathtub, washbowl, kitchen sink, wet, and basement or near a swimming pool.
During a thunderstorm, stop using the device and disconnect it power supply and USB connection
line to avoid lighting strike.
If the device is left unused for a rather long time, disconnect it from the power supply and unplug the
power plug.
When there is smoke emitted from the device, or some abnormal noise or smell, disconnect the device
from the power supply, and unplug the power plug immediately.
Contact the specified maintenance center for repair.
Do not insert any object into equipment slots that is not part of the product or auxiliary product.
Before connecting a cable, connect the grounding cable of the device first.
Do not disconnect the grounding cable until you disconnect all other cables.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Cleaning Requirements
Before cleaning the device, disconnect it from the power supply.
Use a piece of soft, dry and anti-static cloth to clean the device.
Keep the power plug clean and dry.
Table of contents
Other Nexvoo IP Camera manuals
