MPFiltri BS110 Manual
Operators Guide
BS110 - BS500
Bottle Samplers
PRODUCT OVERVIEW
• Vacuum feature for de-aeration of uids
• Compatible with all portable MP Filtri Contamination Monitoring Products
• Strong Laboratory aesthetic
• Transparent outer for visual indication
• Full accessories kit included
• Includes carry case (BS110 only)
• Contact MP Filtri for use with uids other than those stated
The 110 ml and 500 ml bottle samplers are suitable for off-line and laboratory applications where uid sampling at point of use is
inaccessible or impractical. A uid de-aeration facility comes as standard.
BS110 - 110 ml Bottle Sampler & BS500 - 500 ml Bottle Sampler
Features & Benets
Operators Guide
1
Product Presentation
The Bottle Sampler is an off-line unit designed to be used with the LPA2, LPA3 and CML2 for accurate contamination monitoring
and suitable for laboratory applications.
The product is compatible with various hydraulic uid types depending on the version being used (please refer to section 5 for
further details). The product is also compatible with a wide range of uid viscosities.
High Viscosity uids
The high-pressure version of the BS500 is suitable for uids with a viscosity grade of ISOVG 68 (68 cSt @40C).
This feature is used to decrease the de-aeration and ush times of such uids.
Benets
• Easy to use
• De-aeration Facility
• Large sample volume sampling up to 500 ml bottles
Operators Guide
2
Scope of Supply BS110
- 1 x 110 ml Bottle Sampling unit
- 1 x Pressure cap
- 1 x Vacuum cap
- 1 x M16x2 microbore pressure hose, 600 mm long
- 1 x 1 L waste receptacle
- 1 x 12V, 2A power adapter c/w UK/EU/US/AUS/CN heads
- 1 x pack of disposable dip tubes
- 1 x hand pump
- 3 x plastic bottles
- 3 m hand pump hose
- Fluid condition handbook
- Support case
- Digital copy of user guide/software/drivers
Scope of Supply BS500
- 1 x 500 ml Bottle Sampling base unit (*)
- 1 x Top cap, pressure/vacuum chamber (*)
- 1 x M16x2 microbore pressure hose, 600 mm long
- 1 x Power adapter
- 1 x UK/EU/US/AUS/CN power lead*
- 3 x 210 ml clear glass bottles
- 2 x 500 ml clear glass bottles
- 1 x Digital copy of user guides/software/drivers
(*) Specic model will be as per ordered item
PRODUCT OVERVIEW
IMPORTANT:
Do not use the contamination monitoring product power supply with the 500 ml bottle sampling unit, as it has an inadequate power
rating.
Operators Guide
3
Operators Guide
4
DECLARATION OF CONFORMITY
EC Declaration of Conformity
The products included in this Declaration are all variants of the following:
• Standard (2.5 bar) or High Pressure (4.5 bar)
• Compatible with mineral oil/ synthetic uids, offshore uids, phosphate esters (inc. aerospace versions)
• Glass or Acrylic Chamber
• All power supply options
For part codes see the Designation & Ordering Code (section 4.7 on pages 18-19)
Product Manufacturer:
MP Filtri UK
Bourton Industrial Estate
Bourton on the Water
Cheltenham
Gloucestershire
GL54 2HQ
01451 822522
sales@mpltri.co.uk
The products described are in conformity with the following directives:
2014/30/EU Electromagnetic Conformity
Certication Testing that has been carried out is in accordance with:
• DEF STAN 00-35 Part 3 issue 4 Environmental Test Methods
• BS EN 60068 range of standards covering environmental conditions
• BS EN 60529: 1992 + A2:2013 Degrees of Protection provided by enclosures (IP Code)
• BS EN 62262:2002 Degrees of Protection Provided for Electrical Equipment against External Mechanical Impacts (IK Code)
• BS EN 60721-3-4: 1995 Part 3: Classication of Groups of Environmental Parameters and their severities, Section 3.4
Date: 13 July 2018
Signed
Phil Keep (Managing Director) on behalf of MP Filtri UK Ltd
Operators Guide
5
Operators Guide
6
TABLE OF CONTENTS
Product overview 1
EC Declaration of Conformity 5
Table of Contents 6
What this guide is for 8
1 General warnings and information for the Operator 10
1.1 General safety warnings 10
1.2 Operator position and dangerous areas 12
1.3 Dangers and Hazards that cannot be eliminated 12
1.4 Personal Protective Equipment 12
2 Transportation and Storage 13
2.1 Transportation and Handling Conditions 13
2.2 Storage 13
3 Warranty, Limitations and Disclaimers 14
4 Technical Specication 16
4.1 Performance 16
4.2 Electrical Interface 16
4.3 Physical Attributes 16
4.4 Fluid Characteristics 16
4.5 Environment 16
4.6 Connection to use with Particle Analyser 17
4.7 Dimensions and ordering code 18
5 Product Installation and General Operation 21
5.1 Preliminary Operations 21
5.1.1 Internal Cleaning 21
5.1.2 Pressurization and Opening 21
5.1.3 Bottle Cleanliness and Verication 21
5.1.4 Fluid Sampling/ Hand Pump 22
5.2 General Operation 22
5.2.1 Physical Checks 22
5.2.2 Flushing and Flushing Fluids 22
5.2.3 De-aeration 25
5.2.4 Operating with Contamination Monitoring Product 26
5.3 Disposal 27
6 Related Products 28
7 Troubleshooting / FAQ 31
7.1 Misuse of Product 31
7.2 Fault Finding 31
Page
Operators Guide
7
What this guide is for
This guide will take you through the installation and instructions for making the most out of your Bottle sampling units.
It contains detailed information to enable you to master the full functionality of the device, as well as key information on safety,
waranty, maintenance and accessories.
At MP Filtri we are commited to customer service and hope this manual will help you to fully master the Bottle sampling units.
Disclaimer
As a policy of continual improvement, MP Filtri reserves the right to alter the specication without prior notice.
Operators Guide
8
Other manuals for BS110
1
This manual suits for next models
1
Table of contents
Other MPFiltri Industrial Equipment manuals
