Monarch PATHFINDER Ultra 6030TM Service manual

Operator’s Handbook

MMonarch®6030TM

PATHFINDER®UltraTM

Printer

Each product and program carries a respective written warranty, the

only warranty on which the customer can rely. Monarch reserves the

right to make changes in the product, the programs, and their

availability at any time and without notice. Although Monarch has

made every effort to provide complete and accurate information in this

manual, Monarch shall not be liable for any omissions or

inaccuracies. Any update will be incorporated in a later edition of this

manual.

WARNING

This equipment has been tested and found to comply with the limits for

a Class A digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

CANADIAN D.O.C. WARNING

Thisdigitalapparatus doesnotexceed theClassA limitsforradio noise

emissions from digital apparatus set out in the Radio Interference

Regulations of the Canadian Department of Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques

dépassant les limites applicables aux appareils numériques de la

classe A prescrites dans le Réglement sur le brouillage radioélectrique

édicte par le ministère des Communications du Canada.

Monarch®, PATHFINDER®, PATHFINDER® Ultra, 6030, 6076, 6093, and 6094

are trademarks of Monarch Marking Systems, Inc.

Laser Scanner Safety Information –––––––––––––––––––––––––––––

This product is certified to be a Class II laser product with the

United States Department of Health and Human Services

(DHHS) Center for Devices and Radiological Health. The

scanner emits less than 1.0 milliwatt beam of laser light from

the scanning window. Laser light in excess of Class I limits

must be inside a protective cover. No maintenance is required

to keep this product in compliance with DHHS Regulation 21,

Subchapter J. No controls are provided for operation or

maintenance.

The laser safety warning is a yellow and black label required

by DHHS and IEC 825. This label is found on the top cover of

the printer.

Laser Window

Preface

The Operator’s Handbook contains product specifications and

accessories, including information about

Fcharging the battery handle.

Floading supplies.

Fusing the keypad.

Fstarting an application and transferring data.

Fcollecting data and printing.

Fusing the optional laser scanner.

Fcaring for and maintaining the printer.

Ftroubleshooting.

Audience –––––––––––––––––––––––––––––––––––––––––––––––––––

The Operator’s Handbook is for both the Operator and System

Administrator.

The Operator is the person who collects data and/or prints and

applies labels or tags. The System Administrator may use

Command mode to set up specific features and functions of

the printer for the operator.

Terms to Know––––––––––––––––––––––––––––––––––––––––––––––

Application Program in the printer that may prompt

you for data, scan bar codes, print labels,

etc. This program is developed by a

programmer with your specific needs in

mind, and then is downloaded to your

printer.

Command mode Series of menus on your printer display

from which you can start/resume

applications, transfer data, configure the

printer or use diagnostics.

Continuous

mode Print mode in which a strip of supplies is

printed with one press of the trigger.

Download (receive) Transmission of data from the host to your

printer.

Host Any mainframe, minicomputer, or personal

computer (PC).

Lowercase Alpha

mode Data Entry mode that allows you to use

lowercase letters. Also enters and exits

the alternate character set for

International models.

Non-Peel mode Supply loading method in which labels are

not peeled from the backing paper during

printing.

Numeric mode Data Entry mode that allows you to use

function and number keys.

On-Demand

mode Print mode in which one label prints each

time you remove the previously printed

label.

Peel mode Supply loading method in which the label

peels from the backing paper during

printing.

Special Character

mode Data Entry mode that allows you to enter

ANSI characters.

Uppercase Alpha

mode Data Entry mode that allows you to use

uppercase letters.

Upload (send) Transmission of data from your printer to

the host.

6030 Operator’s Handbook

Chapter1. Introduction

This printer can be programmed to fit your specific needs.

You can use it to scan data or print labels specially designed

for you. In order to use the printer, an application that

includes your format and printer configuration must be

downloaded. See your System Administrator for details.

The printer features

FAlphanumeric keypad

FOn-Demand and continuous printing

FAdjustable supply width capabilities

FClock/calendar

FRS-232 communications

FGraphic printing capabilities

FDisplay backlight

FLow power shutdown to conserve the battery

FCommand mode

FLaser scanner (factory-installed option)

FAdditional RAM memory (factory-installed option)

FInternational keypad (factory-installed option).

See Appendix B, "Specifications and Accessories," for a list of

available accessories.

1-1

Using Command Mode ––––––––––––––––––––––––––––––––––––––

Command mode contains basic functions and features you can

modify for your specific needs.

nSome features of Command mode may already be set in your

application. See your System Administrator for details about

your application.

Command mode uses a series of menus on your printer to

start an

application An application must be running for you to

enter or print data. See Chapter 4,

"Entering and Printing Data," for

information on starting your application.

resume an

application If you exit an application, you may restart

it where you left off. See Chapter 4,

"Entering and Printing Data," for

information on resuming your application.

transfer data You must transfer data if an application

file has not already been downloaded to

your printer. See your System

Administrator to see if you need to

transfer data. If so, see Chapter 5,

"Transferring Data."

configure your

printer Your printer should already be configured.

See your System Administrator if you need

to change the configuration. See Chapter

6, "Configuring the Printer," for more

information.

perform

diagnostics If you have problems with your printer,

your System Administrator may need to

perform diagnostics. Chapter 10, "Using

Diagnostics," includes information for the

System Administrator.

6030 Operator’s Handbook

1-2

Using the Menus ––––––––––––––––––––––––––––––––––––––––––––

The Command mode uses a series of menus you can scroll

through to access the functions you need. The menu names

appear in uppercase letters on line 1. The menu selection(s)

appear with only the first letter capitalized on line 2 of the

display as shown.

MAIN MENU

Resume App.

While in Command mode, use the following keys:

eExecutes the selection displayed on line 2.

bReturns to the current menu or MAIN

MENU.

<>Scrolls through the menu selections.

To select an item from the MAIN MENU:

1. Press the arrow keys until you see the item you want.

2. Press e.

Repeat these steps to select an item from any sub-menu.

Chapter 1. Introduction

1-3

6030 Operator’s Handbook

1-4

This manual suits for next models

Table of contents

Other Monarch Printer manuals

Monarch

Monarch 9860 User manual

Monarch

Monarch 9860 User manual

Monarch

Monarch Paxar 9450 RASCAL Service manual

Monarch

Monarch 9855 User manual

Monarch

Monarch 9460 Operating and maintenance manual

Monarch

Monarch 9855 Service manual

Monarch

Monarch RASCAL 9450 User manual

Monarch

Monarch 9855 Service manual

Monarch

Monarch Pathfinder Ultra Silver 6032 User manual

Monarch

Monarch 9445 Technical Document

Monarch

Monarch 9400 Series Service manual

Monarch

Monarch 9403 Service manual

Monarch

Monarch 94 Series Operator's manual

Monarch

Monarch 9416 Technical Document

Monarch

Monarch 9406 Service manual

Monarch

Monarch 9825 User manual

Monarch

Monarch 9855 HF User manual

Monarch

Monarch 9401 Technical Document

Monarch

Monarch 9493 9493 User manual

Monarch

Monarch Sierra Sport 2 User manual

Monarch

Monarch Pathfinder Ultra Silver 6032 User manual

Monarch

Monarch 9414 User manual

Monarch

Monarch 9474 Operating and maintenance manual

Monarch

Monarch Paxar Sierra Sport 3R 9430 User manual

Popular Printer manuals by other brands

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series quick start guide

Evolis

Evolis Elypso user guide

Kyocera

Kyocera FS-9530DN specification

Canon

Canon LASER SHOT LBP-1210 Specifications

Samsung

Samsung BIXOLON SRP-350plusF user manual

Canon

Canon PIXMA PRO-1 Series Getting started

Canon

Canon PIXMA G3560 Online manual

Dell

Dell Color Laser Printer 2130cn user guide

Tektronix

Tektronix Phaser 840 user guide

Epson

Epson ET-7750 Programming guide

Canon

Canon CLBR 460ps Service manual

Eltron

Eltron P210 Guide manual

Ricoh

Ricoh MD-P1 Service manual

Epson

Epson SC-F7100 series user guide

Epson

Epson Stylus C40UX Service manual

Canon

Canon imagePASS-A2 Service guide

Canon

Canon S820D user guide