MinimumRC DH-88 Comet User manual

Table of contents

Other MinimumRC Toy manuals

MinimumRC

MinimumRC Sopwith Camel User manual

MinimumRC

MinimumRC Tigermoth User manual

MinimumRC

MinimumRC T-34 Mentor User manual

MinimumRC

MinimumRC A6M5-D User manual

MinimumRC

MinimumRC Butterfly V1 User manual

MinimumRC

MinimumRC F8F Rare Bear Manual

MinimumRC

MinimumRC P-51 Mustang User manual

MinimumRC

MinimumRC Flycat User manual

MinimumRC

MinimumRC Shrimp V2 User manual

MinimumRC

MinimumRC F4U Corsair User manual

MinimumRC

MinimumRC T-28 Trojan User manual

MinimumRC

MinimumRC Fan-Jet 600 User manual

MinimumRC

MinimumRC Minimoa User manual

MinimumRC

MinimumRC F8F-RareBear Pro User manual

MinimumRC

MinimumRC KI-61 Tony User manual

MinimumRC

MinimumRC Beech V-35 Manual

MinimumRC

MinimumRC F8F-RareBear Pro User manual

MinimumRC

MinimumRC Ju-87 User manual

MinimumRC

MinimumRC P40 Q Series User manual

MinimumRC

MinimumRC J-3 User manual

MinimumRC

MinimumRC Piper Cub J-3 User manual

MinimumRC

MinimumRC ASG-32 User manual

MinimumRC

MinimumRC Vulcanair P-68 User manual

MinimumRC

MinimumRC A6M5-Q Series User manual

Popular Toy manuals by other brands

marklin

marklin 37321 instruction manual

Canon

Canon PAPER CRAFT Assembly instructions

GREAT PLANES

GREAT PLANES Pitts M-12S instruction manual

NOCH

NOCH 14261 manual

Hausler

Hausler 450 SE V2 quick start

Dynaflite

Dynaflite Daydream instruction manual

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Build instructions

Kenner

Kenner Batman 63651 instructions

LEGO

LEGO 8527 instructions

iKarus

iKarus ECO 8 Assembly instruction

Multiplex

Multiplex EasyStar II Building instructions

Walkera

Walkera 38 User handbook

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE manual

MD

MD MXION SWD user manual

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway instructions

marklin

marklin 39671 user manual

Meccano

Meccano 15103 instructions

LEGO

LEGO TECHNIC 8735 instructions

DH-88 Comet

Assembly Instructions

Important notification

1.The model is supplied with UFO and 502 glue. UFO is for bonding foam parts, and 502 for

bonding wood, carbon fiber and metal parts. 502 glue will cause serious corrosion to foam parts.

2.Please wait for the glue to dry and solidify in each installation step before the next installation.

3.Please avoid using flame to heat the heat shrinkable tube on the model. Electric iron shall be

used for heating.

4.Please use razor blade to remove the parts from the plate. Do not tear the parts by force.

1. Wooden frame components of the fuselage.

2. Assemble the wooden frame of the fuselage.

3. Connect the receiver to the servos, power it on, and bind the receiver with the tansmitter to

ensure that the servo arm returns to its neutral position.

Test the servos to ensure they are functioning correctly and install the servos and servo arms

according to the diagram.

Note: This step is crucial. Please ensure that the servos are powered on, the servo arm is in the

neutral position, and follow the diagram precisely. Once the model is assembled, adjustments

cannot be made.

4. (Bottom view) Install and secure all three servos from underneath the wooden board.

5. Use adhesive Velcro to secure the receiver.

6. Connect the receiver to the servos. Turn on the transmitter and test the correspondence

between the three servos and the channels on the transmitter.

After testing, use adhesive Velcro to secure the receiver and secure the cables with zip ties.

7. Bend the front ends of the two side panels of the fuselage inward as shown in the diagram.

8. Method for bending foam board pieces: Press the part that needs to be bent against the palm

of your hand.

9. Press the part that needs to be bent against the edge of a table, ensuring that the palm is in

close contact with the part, and slide downward.

10. Completed bent parts.

11. Use glue to secure the wooden frame.

12. Press the top and bottom plates of the fuselage and bend them into the corresponding shape

of the fuselage contour.

13. Use glue to secure the rear top plate of the fuselage. Note that the front end of the rear top

plate should align with the cockpit position on the fuselage.

14. Use glue to secure the front top plate of the fuselage.

15. Use glue to secure the bottom plate of the fuselage. Note: Do not apply glue to the indicated

position on the front bottom plate (yellow contour) in the diagram.

16.

17. Close the fuselage.

18. Apply decals to the fuselage.

19. The front bottom plate of the fuselage can be opened forward as a battery compartment

cover. When the cover is closed, it should be secured using the end of the decal.

20. Use a sharp tool (screwdriver) to score through the marked lines on the bottom of the

horizontal stabilizer, allowing the elevator to move freely along the lines on both sides.

21. Use a sharp tool (screwdriver) to score through the marked lines on the bottom of the vertical

stabilizer, allowing the rudder to move freely along the lines on both sides.

22. Install vertical stabilizer reinforcement.

23. Insert the horizontal stabilizer into the pre -cut slot on the fuselage and secure it. Ensure that

the horizontal stabilizer is parallel to the wing spar.

24. Install the vertical stabilizer.

25. The two motor compartments are designed to be mirror symmetrical. Please assemble both

motor compartments simultaneously to avoid confusion.