MinimumRC Tigermoth User manual

Table of contents

Other MinimumRC Toy manuals

MinimumRC

MinimumRC F8F Rare Bear Manual

MinimumRC

MinimumRC Minimoa User manual

MinimumRC

MinimumRC F8F-RareBear Pro User manual

MinimumRC

MinimumRC ASG-32 User manual

MinimumRC

MinimumRC Cessna L-19 User manual

MinimumRC

MinimumRC Butterfly V1 User manual

MinimumRC

MinimumRC F8F Rare Bear Manual

MinimumRC

MinimumRC Beech V-35 User manual

MinimumRC

MinimumRC Spacewalker V2 User manual

MinimumRC

MinimumRC Cessna-152 User manual

MinimumRC

MinimumRC T-28 Trojan User manual

MinimumRC

MinimumRC Sopwith Camel User manual

MinimumRC

MinimumRC Flycat User manual

MinimumRC

MinimumRC P-51 Mustang User manual

MinimumRC

MinimumRC Shrimp V2 User manual

MinimumRC

MinimumRC P-51 Mustang User manual

MinimumRC

MinimumRC F4U Corsair User manual

MinimumRC

MinimumRC DH-88 Comet User manual

MinimumRC

MinimumRC Ju-87 User manual

MinimumRC

MinimumRC A6M5-Q Series User manual

MinimumRC

MinimumRC F8F-RareBear Pro User manual

MinimumRC

MinimumRC T-28 Trojan User manual

MinimumRC

MinimumRC Beech V-35 Manual

MinimumRC

MinimumRC Piper Cub J-3 User manual

Popular Toy manuals by other brands

marklin

marklin 37321 instruction manual

Canon

Canon PAPER CRAFT Assembly instructions

GREAT PLANES

GREAT PLANES Pitts M-12S instruction manual

NOCH

NOCH 14261 manual

Hausler

Hausler 450 SE V2 quick start

Dynaflite

Dynaflite Daydream instruction manual

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Build instructions

Kenner

Kenner Batman 63651 instructions

LEGO

LEGO 8527 instructions

iKarus

iKarus ECO 8 Assembly instruction

Multiplex

Multiplex EasyStar II Building instructions

Walkera

Walkera 38 User handbook

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE manual

MD

MD MXION SWD user manual

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway instructions

marklin

marklin 39671 user manual

Meccano

Meccano 15103 instructions

LEGO

LEGO TECHNIC 8735 instructions

Tigermoth

Assembly Instructions

Important notification

1.The model is supplied with UFO and 502 glue. UFO is for bonding foam parts, and 502 for

bonding wood, carbon fiber and metal parts. 502 glue will cause serious corrosion to foam parts.

2.Please wait for the glue to dry and solidify in each installation step before the next installation.

3.Please avoid using flame to heat the heat shrinkable tube on the model. Electric iron shall be

used for heating.

4.Please use razor blade to remove the parts from the plate. Do not tear the parts by force.

1. Fuselage internals.

2. Bond the plywood structure with CA glue.

3. Fix the landing gear steel wire with m1x3 screws.

4. Fix the motor with a tie and use 502 glue on the side for reinforcement. Please pay attention to

the position of the tie head shown in the figure.

5. Connect the servos to a powered receiver. Bind the receiver with your transmitter to make the

servos arms return to their neutral point. Test whether the servos are working correctly, and

install the servo arms according to the position shown in the picture.

Note: Please make sure that the servos have been tested and installed in strict accordance with

the following picture. After assembling the model, it will be not able to adjust.

6. (Bottom view) The three servos are installed and fixed under the plywood board.

7. Connect the receiver to the motor, install the propeller and test whether the rotation direction

of the motor is correct. Test whether the corresponding relationship between the three servos and

the transmitter channel is correct. After the test, fix the receiver with Velcro and tie the cables.

8. Install magnet base & magnet.

9. Fuselage parts.

10. Align the scribed line on the inner side of the fuselage and fix the wooden s tructure with glue.

11. Upper wing support base parts.

12. Install upper wing support base parts.

13. Top and bottom strip of the fuselage.

14. Fix the top and bottom strip of the fuselage with glue.

15. Install tail landing gear.

16. Bend the nose cover parts along the scribed line on the inner side.

17. Install nose cover on one side. Note: the position shown in the picture is the battery cover

plate that can be opened. No glue shall be applied to the area marked by the yellow line.

18. Fix the top and bottom strip of the nose with glue.

19. Combine nose.

20. Paste stickers and install the propeller.

21. Install the windshields.

22. Insert the copper axle core into the center of the wood wheel core.

23. Glue the tires.

24.

25. Slightly bend the landing gear steel wire forward.

26. Install the landing gear cover plate and wheels. Bend the outer end of the steel wire with

pointed nose pliers.