Microtronics MyDatasensH2S 1000 User manual

300753 | Rev.05

Cover

Valid from:

lFirmware version: 01v026

lModem Version: 02v002

lServer version: 44.1

lHardware version: 4.0

User manual

myDatasensH2S 1000

Chapter 1 Table of contens
Chapter 1 Table of contens
Cover 1
Chapter 1 Table of contens 3
Chapter 2 Declaration of conformity 9
Chapter 3 Ex certification 11
Chapter 4 Technical data 17
Chapter 5 General specifications 19
5.1 Translation 19
5.2 Copyright 19
5.3 General descriptive names 19
5.4 Ex protection 20
5.5 Safety instructions 21
5.5.1 Use of the hazard warnings 21
5.5.2 General safety instructions 21
5.5.3 Safety and preventative measures for handling GSM/GPRS modems 22
5.5.3.1 Safety and precautionary measures for the GSM/GPRS modem installation 22
5.5.3.2 Safety measures for installing the antenna 23
5.6 Overview 23
5.6.1 Block diagram 24
5.7 Intended use 24
5.8 General product information 25
5.9 Device labelling 25
5.10 Installation of spare and wear parts 26
5.11 Storage of the product 26
5.12 Obligation of the operator 27
Chapter 6 Functional principle 29
6.1 Determining the H2S concentration 30
6.1.1 Determining the raw value 31
6.1.2 Calculation of the calibrated H2S measurement value 32
Rev. 05 3

1.3 Calculation of the trimmed H2S measurement value 32
1.4 Digital filter 33
1.5 Alarm module 33
1.6 Record module 34
2 ALOHA transmission mode 35
3 Automatic selection of the GSM network 35
3.1 Ban list 36
Chapter 7 Storage, delivery and transport 37
1 Inspection of incoming deliveries 37
2 Scope of supply 37
3 Storage 37
4 Transport 38
5 Return 38
Chapter 8 Installation 39
1 Dimensions 39
2 Installing the myDatasensH2S 1000 40
2.1 Wall mounting 41
2.2 Suspended installation 43
3 Electrical installation 44
3.1 Connecting the GSM antenna 44
3.1.1 Optimum antenna positioning for assembly in a shaft 45
3.1.1.1 Typical influences on the signal quality 45
3.1.1.2 Possibilities for improving the signal quality 45
3.1.1.3 Procedure for determining the optimum position of the antenna 45
3.2 Technical details about the SIM slot 46
3.3 Technical details about the USB interface 46
Chapter 9 Initial Start-Up 49
1 User information 49
2 General principles 49
3 Placing the system into operation 49
4Rev. 05

Chapter 1 Table of contens

9.4 Testing communication with the device 51

Chapter 10 User interfaces 53

10.1 User interface on the myDatasensH2S 1000 53

10.1.1 Operating elements 53

10.1.1.1 Solenoid switch 53

10.1.1.2 Status LED 54

10.2 User interface on the myDatanet-Server 55

10.2.1 Site configuration 55

10.2.1.1 Site 55

10.2.1.2 Comments 55

10.2.1.3 Measurement channels 56

10.2.1.3.1 Basis 56

10.2.1.3.2 Alarms 56

10.2.1.3.3 Cross sensitivity of the H2S sensor 57

10.2.1.4 Calculated channels 57

10.2.1.4.1 Basis 57

10.2.1.4.2 Calculation 59

10.2.1.4.3 Alarms 61

10.2.1.5 Internal channels 61

10.2.1.5.1 Basis 61

10.2.1.5.2 Alarms 61

10.2.1.6 Alarm settings 62

10.2.1.7 Basic setting 63

10.2.1.8 FTP export settings 64

10.2.2 Device configuration 64

10.2.2.1 Comments 64

10.2.2.2 Measurement instrument 64

10.2.2.3 Device-specific settings 66

10.2.2.4 GPRS 66

Chapter 11 myDatanet server 67

Rev. 05 5

1 Overview 67
1.1 Explanation of the symbols 67
2 "Customer" area 68
3 "Site" area at customer level 70
3.1 Reports 71
3.2 Groups 71
3.3 Map view 71
4 Recommended procedure 71
4.1 Creating the site 71
4.2 Assigning a device to the customer 73
Chapter 12 DeviceConfig 75
1 General 75
2 Prerequisites 75
Chapter 13 API 77
1 General 77
2 rapidM2M Playground 77
2.1 Übersicht 78
Chapter 14 Maintenance 79
1 General maintenance 79
2 Accu or battery pack 79
3 Replacing the rechargeable battery or battery pack 80
3.1 Charging the accu pack 83
3.2 Replacing the rechargeable battery cover 85
3.3 Maintenance of the rechargeable battery seal 87
4 Maintenance of the antenna socket (not necessary from hardware version 4.0 onwards)
88
5 Maintenance of the antenna connector (only for antennas supplied before 09/2013) 89
6 Maintenance of the H2S sensor 90
6.1 Calibration, trimming and zero-point alignment 90
6.1.1 Safety instructions for handling H2S gas 91
6Rev. 05

Chapter 1 Table of contens
14.6.1.2 Calibration 91
14.6.1.2.1 Calibration specifications 91
14.6.1.2.2 Calibration room equipment 92
14.6.1.2.3 Calibration process 92
14.6.1.3 Trimming 98
14.6.1.4 Zero-point alignment 102
Chapter 15 Removal/disposal 105
Chapter 16 Troubleshooting and repair 107
16.1 General problems 107
16.2 Log entries and error codes 109
16.2.1 Modem error 114
16.3 Evaluating the device log 117
16.3.1 Evaluating the device log on the myDatanet server 117
16.3.2 Evaluating the device log using DeviceConfig 117
Chapter 17 Spare parts and accessories 119
17.1 Assembly sets 119
17.2 Antennas 119
17.3 Rechargeable battery and battery packs 119
17.4 Charging device 119
17.5 Cable 120
17.6 Other accessories 120
Chapter 18 Document history 121
Chapter 19 Glossary 125
Chapter 20 Contact information 127
Rev. 05 7