Megawin ME6000 Series Installation guide

800531-1.0-eng

Quick Manual for ME6000 and MegaWin

This manual is quick manual for ME6000 measurement system and for MegaWin PC-software.

More detailed information about device and MegaWin PC-software you can find from English

versions of manuals on MegaWin CD-rom.

Page 2 of 32

800531-1.0-eng ME6000 and MegaWin Quick Manual

Index

GETTING STARTED WITH ME6000 ....................................................................................................................... 4

1.1.

ONNECTORS AND

UTTONS

...................................................................................................................................... 4

1.2.

EVERSE SIDE OF

EVICE

........................................................................................................................................... 6

1.3.

OW TO INSTALL

ME6000

SYSTEM

............................................................................................................................ 6

1.4.

CF-M

EMORY CARD USE

............................................................................................................................................ 8

1.5.

ONNECTING THE

EMG

REAM LIFIER

ABLES

............................................................................................................. 9

1.6.

HANGING BATTERIES

............................................................................................................................................. 10

1.7.

ENERAL HANDLING

............................................................................................................................................... 10

GETTING STARTED WITH MEGAWIN ..................................................................................................................12

2.1.

EGA

IN ROGRAM GROU

.................................................................................................................................. 12

2.2.

UNNING THE ROGRAM

......................................................................................................................................... 12

2.3.

ONFIGURING THE CORRECT

COM

ORT

.................................................................................................................... 14

2.4.

ERFORMING FIRST MEASUREMENTS

......................................................................................................................... 14

2.4.1

How to create Person? .............................................................................................................................. 14

2.4.2

How to choose an existing protocol? ........................................................................................................ 15

2.4.3

How to perform measurement? ................................................................................................................ 15

2.4.4

How to obtain results? .............................................................................................................................. 16

ME6000 MANAGER ............................................................................................................................................17

3.1.

ONNECTION TAB

.................................................................................................................................................. 17

3.1.1

U B cable (COM port) selections ............................................................................................................... 18

3.1.2

WLAN selections........................................................................................................................................ 18

3.2.

RESETS TAB

......................................................................................................................................................... 19

3.3.

ILES TAB

............................................................................................................................................................. 19

3.4.

ALIBRATION INFO

................................................................................................................................................. 21

3.5.

DATE FIRMWARE

................................................................................................................................................ 21

3.6.

IRELESS

............................................................................................................................................................. 22

3.7.

WLAN

SETTINGS

.............................................................................................................................................. 24

3.7.1

Making WLAN connection......................................................................................................................... 25

MAIN WINDOW IN MEGAWIN ...........................................................................................................................26

4.1.

UTTONS

............................................................................................................................................................. 27

4.2.

ENU

................................................................................................................................................................. 27

4.2.1

File Menu .................................................................................................................................................. 27

4.2.1.1

Export......................................................................................................................................................................27

4.2.1.2

Import MegaWin exchange file ...............................................................................................................................28

4.2.1.3

Import MegaWin ASCII file ......................................................................................................................................29

4.2.1.4

Import Tagged File Format file (flash card reader) .................................................................................................30

ME6000 TECHNICAL SPECIFICATIONS .................................................................................................................31

MEGAWIN FEATURES .........................................................................................................................................32

Page 3 of 32

800531-1.0-eng ME6000 and MegaWin Quick Manual

Intended use of ME6000

ME6000 equipment is based on measurement of surface EMG signa s intended for assessment and eva uation of musc e

function and condition, rehabi itation, biofeedback training and scientific research purposes.

With additiona sensors ME6000 can be used for ECG, EEG, HR goniometers, inc inometers, force sensors, etc.

Classification of ME6000

In accordance with MDD 93/42/EEC: Class IIa product

ME6000 equipment is designed according to and fu fi s the requirements of fo owing standards:

EN60601-1 (IEC601-1) Medica e ectrica equipment. Part 1: Genera requirements for safety

EN60601-1-2 (IEC601-1-2) Medica e ectrica equipment. Genera requirements for

safety. E ectromagnetic compatibi ity - Requirements and safety

EN60601-2-40 (IEC601-2-40) Medica e ectrica equipment. Particu ar requirements

for safety of e ectromyographs and evoked response equipment.

ANSI/AAMI EC 12-1991 Disposab e ECG e ectrodes.

ME6000 is according to EN60601-1 interna y powered c ass IIa equipment.

The symbols used with the device:

The device is CE-marked for the conformity to Counci Directive 93/42/EEC regarding medica devices.

The device is equipped with type BF app ied parts fu fi ing the EN 60601-1 (IEC60601-1) standard

The e ectrodes are for sing e use on y.

The enc osure protection is c ass IP20 according to EN60529.

This symbo , found on some equipment parts, means that additiona instructions that further exp ain use

of a particu ar part or function is found in the Device Manua or Service Manua .

LOT O.

The Lot number fo ows this symbo .

The battery type and po arity are exp ained with this symbo .

USE BEFORE:

The e ectrodes sha not be used after the date fo owed this symbo .

We are continuous y deve oping our products. We keep the right to change our products without prior notice.

IP20

Page 4 of 32

800531-1.0-eng ME6000 and MegaWin Quick Manual

1.1. Connectors and Buttons

ME6000

5. Start:

- Measurement 6. Stop:

- Measurement

1. Back

2. Menu-Select-Change

4. Down

3. p

7. Power:

- On

- Off

8. Marker

ME6000 buttons.

Button Function

Back to previous screen.

U-

T-

Confirm your se ections or changes.

Move up in the menu or se ect a different channe in

On ine Raw measurement.

Move down in the menu or se ect a different channe in

On ine Raw measurement.

Start the measurement

Stop the measurement

Power on/off

Data marker insertion

Page 5 of 32

800531-1.0-eng ME6000 and MegaWin Quick Manual

ME6000 measurement unit connections

Connector Function

G-

-P

Connectors for EMG-preamp ifier cab es or other

signa cab es supp ied by Mega E ectronics Ltd.

Warning! Do not connect any other cab es in these

connectors.

Marker / Trigger Out from this connector.

USB connector with mini B p ug

Marker /Trigger signa in with this connector (TTL

Input.)

The warning symbol , indicates that you should read this manual when

you are using connectors.

The definitions of signs and symbols on the interface panel are

explained at the beginning of this manual.

NOTE

WARNING

Page 6 of 32

800531-1.0-eng ME6000 and MegaWin Quick Manual

1.2. Reverse side of Device

Reverse side.

3. 5.

1. Labe ing

2. Battery case

3. Battery type and notice for memory card hand ing

4. Battery cover

5. CF –Memory card

The warning symbol indicates that you should read this manual

when you using CF-memory card.

1.3. How to install ME6000 system

Insta MegaWin software and ME6000 device driver to the PC. (For

detai ed instructions p ease see MegaWin Comp ete Eng ish User’s

Manua ).

Connect the ME6000 device to the PC USB port and start MegaWin

software.

Open MegaWin program and choose the right COM port settings in

System Setup. P ease see chapter 3 for instructions.

The system is now ready for use. For instructions on how to perform

measurements see Chapter 4 from comp ete Eng ish ME6000 user manua .

WARNING

Page 7 of 32

800531-1.0-eng ME6000 and MegaWin Quick Manual

Settings

Download

Measure

ME6000

Isolation Transformer

The connections of the ME6000 system

Use only parts specified and supplied by Mega Electronics Ltd.

You should use a medical approved Isolation Transformer when using

ME6000 with USB connection. If the PC or its accessories are near the

patient environment it is recommended to use the

Isolation Transformer

also when using WLA connection.

See further information about connecting preamplifier cables to the skin

Chapter 4 from complete English ME6000 user manual.

Before starting to use ME6000 for medical purposes, familiarize yourself

with the menus and functions of the device by reading Chapter 5 from

complete English ME6000 user manual.

WARNING

NOTE

NOT

WARNING

Page 8 of 32

800531-1.0-eng ME6000 and MegaWin Quick Manual

1.4. CF-Memory card use

Under the battery cover of the ME6000 measurement unit there is a socket for

the memory card. Whi e using the card, it is important to notice the fo owing

instructions:

Hand e the memory card carefu y.

Memory card must be inserted into the measurement unit before the

measurement and down oad in Recording or saving forms. Recording

and Saving forms are discussed further in Chapter 5 in comp ete Eng ish

ME6000 user manua .

Before inserting or removing the memory card, the measurement unit

must be turned OFF.

Memory card keeps its data a so when it is disconnected.

Be sure that you are a ways inserting the memory card right way.

Do not use too much force.

Inserting memory card into the measurement unit.

After the memory card is inserted, check all measuring parameters before

starting the measurement.

Remove memory card only after stopping the measurement or after

measurement is stopped automatically. Removal of memory card during

the measurement will produce incorrect data in memory card preventing

the data file creation.

NOTE

label side

Page 9 of 32

800531-1.0-eng ME6000 and MegaWin Quick Manual

1.5. Connecting the EMG Preamplifier Cables

To ensure the accuracy of the measurement, connect the EMG Preamp ifier

Cab e to its specified channe socket. The cab e is marked with a abe

indicating the channe number and co or. Connect the EMG Preamp ifier

Cab es as shown in the fo owing figure:

Connecting the measuring cables.

For EMG measurements, connect all wires to the patient or disconnect a

totally free cable from the measurement unit. If some wires of a preamplifier

cable are unused, rotate them and shield the snap connectors and grounding

connector to prevent their contact to any conductive surface.

Do not rotate the connectors when plugged in. Set the marked points (red

dots) in connectors towards each other.

CAUTION

WARNING

Page 10 of 32

800531-1.0-eng ME6000 and MegaWin Quick Manual

1.6. Changing batteries

Switch off the measurement unit.

Open the battery cover.

Remove o d batteries from the measurement unit.

P ace the new batteries as shown in the fo owing figure.

C ose the battery cover.

Inserting batteries into the measurement device.

1.7. General handling

The ME6000 system devices inc ude sensitive e ectronics. Fo ow these genera

instructions when hand ing the system devices:

Hand e the device carefu y.

Be carefu not to drop the device on hard surfaces.

Be carefu not to batter the device.

Do not wash the device with water and avoid extreme y high humid

conditions. Do not use for over 30 minutes in humid p ace (re ative

humidity over 80%) without proper protection. (water proof bag)

Do not expose to temperatures under 0 °C / 32 °F /273K or above 50 °C /

122 °F / 323K or re ative humidity over 80 % without proper iso ation.

These inc udes a so storing and transportation any part of the system.

Do not open the device or the mou ded preamp ifiers joints on the EMG

Preamp ifier Cab es.

In fie d measurement - use the measurement unit inside the be t bag.

Fasten the measurement unit carefu y in the be t.

Carry the device in its own case.

When disconnecting the EMG Preamp ifier Cab es from the device, pu at

the connector. Do not pu at the cab e and do not rotate the connectors.

If externa memory cards are used, hand e them very carefu y. Do not

expose them to magnetic sources, and insert them gent y into the card

socket in the device. Do not bend or f ex the memory card. Avoid

damaging the insu ation on the card.

Remove the batteries when the device is not used within 6 months. P ace

the device in its case. Remove the memory card.

Batterycase

Other manuals for ME6000 Series

Table of contents

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual