Maytag MGD6000X User manual

Gas Dryer

PRODUCT MODEL NUMBERS

MGD6000X, MGD7000X, MGD9000Y

NOTE: Most installations require a minimum 5" (102 mm)

clearance behind the dryer for the exhaust vent with elbow.

See “Venting Requirements”.

27"

(686 mm)

3/4"*

(18 mm)

381/8"

(968 mm)

Back view:

61/4"

(159 mm)

297/8"*

(759 mm)

31/2"*

(89 mm)

53/4"*

(146 mm)

61/8"*

(156 mm)

143/8"

(365 mm)

253/4"

(654 mm)

3/4"*

(18 mm)

* Approx. measurement

Side view:

Front view:

Gas

Water

Vent

Installation spacing for recessed area

or closet installation

All dimensions show recommended and minimum spacing allowed.

■Additional spacing should be considered for ease of

installation and servicing.

■Additional clearances might be required for wall, door, oor moldings, dryer venting, and gas line.

■Additional spacing should be considered on all sides

of the dryer to reduce noise transfer.

■For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are required. Louvered

doors with equivalent ventilitation openings are acceptable.

■Companion appliance spacing should also be considered.

18" min.

(457 mm)

(25 mm)

(127 mm)

24 in.2 min.

(155 cm2)

48 in.2 min.

(310 cm2)

(76 mm)

(25 mm)

Recommended installation clearances (dryer only):

Because Whirlpool Corporation policy includes a continuous commitment to improve Dimensions are for planning purposes only. For complete details, see Installation

our products, we reserve the right to change materials and specications without notice. Instructions packed with product. Specications subject to change without notice.

ELECTRICAL REQUIREMENTS

VENTING REQUIREMENTS

Exhaust venting: Exhaust your dryer to the outside. 4" (102 mm)

diameter vent is required. Rigid or exible metal exhaust vent

must be used. Do not use plastic or metal foil vet. Exhaust hood

must be at least 12" (305 mm) from the ground or any object that

may be in the path of the exhaust.

NOTE: Bottom exhaust installations have a 90º turn inside the

dryer. To determine maximum exhaust length, add one 90º turn

to the chart.

Determine vent length and elbows needed for best

drying performance:

■Use following Vent System Chart to determine type of vent

material and hood combinations acceptable to use.

NOTE: Do not use vent runs longer than those specied

in Vent System Chart. Exhaust systems longer than those

specied will:

■Shorten life of dryer.

■Reduce performance, resulting in longer drying times

and increased energy usage.

Louvered Hood

Angled Hood

Box Hood

Exhaust hoods:

Recommended Styles:

Acceptable Style:

The dryer must be connected to the cold water faucet using new inlet hoses. Do not use old hoses. Do not overtighten.

Damage to the coupling can result.

A 120-volt, 60 Hz, AC-only, 15 or 20 amp fused electrical supply is required. A time-delay fuse or circuit breaker and a separate circuit

are recommended.

GAS SUPPLY REQUIREMENTS

Gas supply: This dryer is equipped for use with Natural gas. Dryer can be converted to L.P. gas. When rigid pipe is used it should be 1/2" IPS. When

acceptable to the gas supplier and local codes, 3/8" approved tubing may be used for lengths under 20 ft (6.1 m). For lengths over 20 ft (6.1 m), larger

tubing should be used. Pipe-joint compounds resistant to the action of L.P. gas must be used. An individual manual shutoff valve must be installed

within 6 ft (1.8 m) of the dryer in accordance with the National Fuel Gas Code ANSI Z223.1.

WATER (STEAM MODELS ONLY) REQUIREMENTS

Determine vent path:

■Select route that will provide straightest and most direct

path outdoors.

■Plan installation to use fewest number of elbows and

turns.

■When using elbows or making turns, allow as much

room

as possible.

■Bend vent gradually to avoid kinking.

■Use as few 90° turns as possible.

INSTALLATION REQUIREMENTS

W10423115A

09/2011

Vent System Chart

Number of

90° elbows

Type

of vent

Box/louvered

hoods

Angled

hoods

0Rigid metal

Rigid metal

64 ft. (20 m)

54 ft. (16.5 m)

44 ft. (13.4 m)

35 ft. (10.7 m)

27 ft. (8.2 m)

58 ft. (17.7 m)

48 ft. (14.6 m)

38 ft. (11.6 m)

29 ft. (8.8 m)

21 ft. (6.4 m)

Other manuals for MGD6000X

This manual suits for next models

Table of contents

Other Maytag Dryer manuals

Maytag

Maytag 111990" Automatic Dryers User manual

Maytag

Maytag MD6400 User manual

Maytag

Maytag MED5707TQ0 User manual

Maytag

Maytag D-5 User manual

Maytag

Maytag MGD6300TQ - Bravos Gas Dryer User manual

Maytag

Maytag MEDB755DW0 User manual

Maytag

Maytag MEDE300VF0 User manual

Maytag

Maytag WGD4915EW2 User manual

Maytag

Maytag Performance MGDE400X User manual

Maytag

Maytag MDG28PD User manual

Maytag

Maytag MDG75PNH User manual

Maytag

Maytag W10557651B User manual

Maytag

Maytag MGD7000AG1 User manual

Maytag

Maytag MLE24PRAY User manual

Maytag

Maytag pav2300agw User manual

Maytag

Maytag MDG30V User manual

Maytag

Maytag Epic Z User manual

Maytag

Maytag W10099070 User manual

Maytag

Maytag MGDB800VQ - R BravosR Steam Gas Dryer User manual

Maytag

Maytag MEDE201Y User manual

Maytag

Maytag MGDB980BW0 User manual

Maytag

Maytag W10385090A User manual

Maytag

Maytag MED5600TQ0 User manual

Maytag

Maytag MEDE500VW - Performance Series 27 Inch Electric... User manual

Popular Dryer manuals by other brands

Bosch

Bosch WTA79200GB Installation and operating instructions

Amana

Amana W10233410A Use and care guide

Miele

Miele TWH 780 WP operating instructions

Asko

Asko T760 user guide

Alliance Laundry Systems

Alliance Laundry Systems 25 Series Original instructions

Bosch

Bosch Logixx 10 WTB76556GB Instruction manual and installation instructions

STIEBEL ELTRON

STIEBEL ELTRON Ultronic S Operation and installation

Electrolux

Electrolux EW2H328R2 user manual

Beko

Beko DS8433RX1M user manual

Dawlance

Dawlance Spinner DS 6000 C owner's manual

Electrolux

Electrolux TP5080TW user manual

AEG

AEG TR838P4OB user manual

Indesit

Indesit IDV 75 instruction manual

Infiniton

Infiniton SD-DG85C manual

BOMANN

BOMANN WT 5019 instruction manual

Alliance Laundry Systems

Alliance Laundry Systems TMB795C Installation

Asko

Asko T793C operating instructions

Kenmore

Kenmore 8041 - 5.8 cu. Ft. Capacity Electric Dryer installation instructions