Maxocam JAS200-F09 User manual
User's Manual
for
Model: JAS200-F09
Model: JAS500-F11
Model: JAS500-F15
maxocam.com Page 1
Table of contents
1. What's inside the box -------------------------------------------------------------------------------- Page 3
2. Camera Exterior -------------------------------------------------------------------------------- Page 3
3. App and supporting network types ----------------------------------------------------------------------------- Page 6
4. App Operation Guide -------------------------------------------------------------------------------- Page 6
5. Detailed explanation of functions -------------------------------------------------------------------- Page 7
1) Quick menu -------------------------------------------------------------------------------- Page 7
2) Add camera / Display mode switch ----------------------------------------------------------- Page 7
3) Alarm on & off -------------------------------------------------------------------------------- Page 8
4) Cloud storage -------------------------------------------------------------------------------- Page 8
5) Camera sharing -------------------------------------------------------------------------------- Page 8
6) Delete camera --------------------------------------------------------------------------------- Page 8
7) Alerted alarms --------------------------------------------------------------------------------- Page 9
8) Device list ---------------------------------------------------------------------------------- Page 10
9) Video Demo ---------------------------------------------------------------------------------- Page 10
10) Profile ---------------------------------------------------------------------------------- Page 10
maxocam.com Page 2
11) Settings ---------------------------------------------------------------------------------- Page 11
6. Cloud and AI ----------------------------------------------------------------------------------- Page 15
7. Viewing screen ----------------------------------------------------------------------------------- Page 20
Disclaimer -------------------------------------------------------------------------------------------- Page 25
1. What's in the box
- IP Camera
- Power supply (not for JAS500-F15. Instead, socket is included.)
- Anchor bolts and screws (not for JAS500-F15)
- Quick Installation Guide
2. Camera Exterior (JAS200-F09)
maxocam.com Page 3
Camera Exterior (JAS500-F11)
maxocam.com Page 4
Camera Exterior (JAS500-F15)
maxocam.com Page 5
3. App and supporting network types
First of all, please upgrade the firmware. We upload firmware when there is upgrade. So to use the
maxocam.com Page 6
updated full functions, you need to upgrade it. When there will be a new version available, you will be noticed
by the app. You can upgrade the firmware easily at Settings - General - Firmware version.
The supported operating systems are iOS and Android for smartphone and tablet (hereinafter we will
mention only smartphone for convenience). PC Windows app is also downloadable from the website.
Supported network connection modes are as follows:
a) Wi-Fi mode: This mode requires a router and it should be connected to your smartphone.
b) AP hotspot mode: This mode is the factory default mode. You must start from this mode for the first
time installation of your camera. When there is no router, you can connect your camera to this
mode. Available functions are limited under this mode. Only live view on your smartphone, recording
of live video/audio into Micro SD Card and alarm sound are possible. You can playback recorded
video/audio using smartphone.
c) 3G, 4G, LTE network mode: When there is no Wi-Fi available, you can use 3G, 4G or LTE network
of your smartphone to access your camera but this mode cannot be used for the initial installation.
4. App Operation Guide
Once you start the App (V380 Pro), you will see the following screen.
5. Detailed explanation about each function
1) Quick menu: Once you tap it, It shows below functions.
maxocam.com Page 7
2) Add cameras / Display mode switch: Once you tap symbol, it shows a screen as follows.
3) Alarm On & Off: This is same as Arm/Disarm. If symbol shows , it means that alarm is not activated. If
symbol shows , it means that alarm is activated. You can toggle between alarm on and alarm off by
tapping this symbol. Once you tap the symbol, it may take some time to change the symbol according to your
maxocam.com Page 8
Wi-Fi speed and status.
4) Cloud storage: If you purchased a cloud service package, symbol will be shown and it will send you
package details page to take actions you like to do. If symbol (no blue color) is shown, it means that you
haven't purchased a cloud service package and so you cannot use functions related to cloud service such as
playing back of human detected files. Please refer to the Cloud and AI pages for the details.
5) Camera sharing: Once you tap symbol, it will show Device Sharing screen. Please enter the email
account of the person you like to share the camera and tap Invite (the person should have installed the V380
Pro app and registered an email account during initial installation of the app). The invitation message will be
shown on the person's "Profile - Messages". The sharing is activated once the person accepts the invitation.
Please see below images. Sharing cameras only have limited functions to protect master user's authority.
6) Delete camera: Once you tap symbol, you can delete the device.
7) Alerted alarms: Images received by push notification will be shown here. Once you tap >or an image, it
will bring you to Alarm message screen.
maxocam.com Page 9
.
8) Device list: It shows the main screen of each installed camera. If you installed more than 2 cameras, you
can move to the next one by moving the screen left/right (card mode) or up/down (list mode) with your finger.
maxocam.com Page 10
This manual suits for next models
2
Table of contents
