Major tech MT96 User manual
MT96
Mini Particle Counter
User Manual
1. Introduction ............................................... 4
2. Features .................................................... 4
3. Front Panel and Bottom Description ............ 5
4. Specifications ............................................ 6
5. Power on or Power off ............................... 7
6. Measurement Mode ................................... 7
7. Setup mode .............................................. 8
7-1. Date/Time setup ................................. 8
7-2. Alarm setup ........................................ 8
7-3. Sample Time ...................................... 9
7-4. Unit(°C/°F)setup ................................. 9
7-5. Memory View ...................................... 9
7-6. Mass/Particle setup ............................ 10
7-7. Auto Power Off setup ......................... 10
8. Shortcut keys ........................................... 11
9. Product Maintenance ................................ 11
10. Cautions .................................................. 11
3
Contents Page no.
1. Introduction
Thank you for purchasing Major Tech’s Mini
Particle Counter. This Mini Particle Counter
with 2.0" color TFT LCD display provides fast,
easy and accurate readings for particle
counter, particle mass concentration, Air
temperature and relative humidity. This
product is a practical hand-held instrument on
which the real scene and time can be
displayed in color on the TFT LCD display. Any
memory readings can be recorded in the
meter. It is an ideal instrument for
environment protection and energy saving.
2. Features
• 2.0" TFT Color LCD display
• 220*176 pixels
• Simultaneously measure PM2.5 and Pm10
• Air temperature and humidity
• Real time clock display
• Analog bar indicator
• Auto Power Off
4
5
3. Front Panel and Bottom
Description
1 - Particle Sensor
2 - LCD Display
3 - Page up and Setup button
4 - Page down and ESC button
5 - Power ON/OFF button
6 - Measure and Enter button
7 - Memory View button
8 - USB charge interface
9 - Air-bleed hole
10 - Bracket fixing hole
4. Specifications
Particle Counter
Channel 2.5um, 10um
Mass Concentration PM2.5 O : - 2000ug/m'
PM10: 0 2000ug/m- '
Resolution 1ug/m³
Air MeasureTemperature
Air Temp Range 0 50 C 32 122 F- - ° / °
Resolution C F 0.1° /°
Basic Accuracy ± 1 C 2° / °F
Humidity Range 0 to 100%RH
Resolution 0.1%RH
Basic Accuracy ±5%RH 0 - 20%RH
80 100%RH-
±3.5%R - H 20 80%RH
6
7
5. Power on or Power off
On the power off mode, press and hold
button, until the LCD is on,then the unit will
power on.
On the power on mode, press and hold
button, until the LCD is off, then the unit will
power off.
6. Measurement Mode
On the power on mode, press the button
to start measuring PM2.5 and PM10, the top
left corner of the LCD display "Counting",
the top right corner of the LCD display count
down, LCD main display PM2.5 and PM10 data
and temperature & humidity readings are at
the bottom of the LCD.
Press the button again to stop the
measurement, the top left corner of the LCD
will display "Stopped", the LCD will display the
last measurement of data.
Data will be automatically saved to the
instrument memory, which can store up to
5000 data.
8
7. Setup mode
Powering on the instrument, Long press button
to enter into the system setup mode
when not do measurement operation, as
shown below:
Press the button and the button to
select the menu option needed, then press
button to enter into the appropriate
settings page.
7-1.Date/Time setup
After entering into Date/Time setup mode,
press button and button to select the
value, press button to set next value.
After completing the setup, please press
button to exit time setting mode and
returns to the system settings mode.
7-2.Alarm setup
Press button and button to activate or
deactivate alarm function.
9
7-3.Sample Time
Press button and the button to select
the sampling time, sampling time can be select
by 30s,1min,2min or 5min.
7-4.Unit(°C/°F)setup
Press button and the button to select
the temperature unit (0C/°F).
7-5.Memory View
Press button and the button to select
storage catalogue, press button to view
data in selected storage catalog. 5000 sets of
data can be stored in the instrument.
7-6.Mass/Particle setup
Press button and the button to select
the mode particle concentration and mass
concentration mode.
10
7-7.Auto Power Off setup
Press button and the button to to set
the auto-off time.
Disable: Power off function is deactivated.
3MIN:
Automatically shutdown in 3 minutes without
any operations.
10MIN:
Automatically shutdown in 10 minutes without
any operations.
30MIN:
Automatically shutdown in 30 minutes without
any operations.
Table of contents
Other Major tech Measuring Instrument manuals
Major tech
Major tech MT790 User manual
Major tech
Major tech MT350 User manual
Major tech
Major tech MT90 User manual
Major tech
Major tech MT730 User manual
Major tech
Major tech MTD73A User manual
Major tech
Major tech MT785 User manual
Major tech
Major tech MT150 User manual
Major tech
Major tech K2007R User manual
Major tech
Major tech MT873 User manual
Major tech
Major tech MT930 User manual
Major tech
Major tech TRUERMS MTD80 User manual
Major tech
Major tech MT123 User manual
Major tech
Major tech MTD15 User manual
Major tech
Major tech MT760 User manual
Major tech
Major tech MT402 User manual
Major tech
Major tech MT 770 User manual
Major tech
Major tech MT960 User manual
Major tech
Major tech MT95 User manual
Major tech
Major tech MT952 User manual
Major tech
Major tech MT785 User manual
