Lutron Electronics CL-2006 User manual
TABLE OF CONTENTS
1. FEATURES................................................................
.
1
2. SPECIFICATIONS......................................................
.
2
3. FRONT PANEL DESCRIPTION.....................................4
3-1 Cover of Testing bottle.........................................4
3-2 Container of Testing bottle...................................
.
4
3-3 Display................................................................4
3-4 Hold Button ( Esc Button )....................................4
3-5 TEST/CAL Button................................................. 4
3-6 Power Button......................................................
.
4
3-7 ZERO Button.......................................................
.
4
3-8 REC Button ( MAX, MIN Button )...........................4
3-9 Battery Compartment/Cover................................. 4
3-10 1.0 ppm Free Chlorine standard solution........... 4
3-11 1.0 ppm Total Chlorine standard solution........ 4
3-12 Zero Chlorine standard solution..........................
.
4
3-13 Empty testing bottle 1........................................4
3-14 Empty testing bottle 2........................................4
3-15 Clean Cloth........................................................4
3-16 Free Chlorine DPD powder ( 10 PCs ).................. 4
3-17 Total Chlorine DPD powder ( 10 PCs )................ 4
4. MEASURING PROCEDURE..........................................5
4-1 Measurement Consideration.................................
.
5
4-2 Measurement......................................................
.
6
4-3 Free/Total Chlorine mode selection.......................
.
8
4-4 Data Hold............................................................9
4-5 Data Record ( Max., Min. reading ).......................
.
9
5. CALIBRATION PROCEDURE.......................................
.
10
6. BATTERY REPLACEMENT...........................................14
1. FEATURES
* The meter measures the Free and Total chlorine ( CL )
in the 0.00 to 3.50 ppm ( mg/L ).
* The measuring method is an adaptation of the USEPA
Method 330.5 for waste water and Standard Method
4500-Cl G for drinking water.
* The advanced optical system based on a special narrow
band LED lamp that allows most accurate and
repeatable reading.
* Friendly and powerful calibration function are able to
validate good performance of your meter at any time.
* 1.00 ppm Free standard solution and 1.00 ppm Total
standard solution are includes as the standard
accessories.
* The unique optics structure, enables the instrument to
read with high resolution : 0.01 ppm ( mg/L ).
* Splash waterproof on the front panel.
* Jumbo LCD, easy readout.
* Microprocessor circuit assures maximum possible
accuracy, provides special functions and features.
* Battery operated for field and on-site testing
convenience.
* Data hold function for freezing the desired value on
display.
* Records Maximum and Minimum reading with Recall.
* Heavy duty & compact housing with hard carrying case,
designed for easy carry out & operation.
* Auto shut off is available to save battery life.
* Application : Test swimming pool, municipal water,
food and beverage water, or other aqueous solution
where fluid clarity is important.
1
2. SPECIFICATIONS
Circuit Custom one-chip of microprocessor LSI
circuit.
Display LCD size : 41 mm x 34 mm
Range Free chlorine ( CL ) :
0.00 to 3.50 ppm ( mg/L ).
Total chlorine ( CL ) :
0.00 to 3.50 ppm ( mg/L ).
Resolution 0.01 ppm ( mg/L ).
Accuracy ± 0.02 ppm ( mg/L ).
@ 1.00 ppm ( mg/L )
Light source LED, 525 nm.
Light detector Photo diode
Method The measuring method is an adapta-
tion of the USEPA Method 330.5 and
Standard Method 4500-Cl G.
*
The reaction between free ( total )
chlorine and the DPD reagent cause
a pink tint in the sample.
Response time Less than 10 seconds.
Sample volume 10 mL.
Data Hold Freeze the display reading.
Memory Recall Maximum & Minimum value.
Display Approx. 1 second.
Sampling
Time
Power off Auto shut off saves battery life or
manual off by push button.
Calibration Zero chlorine.
points 1.00 ppm ( Free chlorine ).
1.00 ppm ( Total chlorine ).
2
Operating 0 to 50 .℃
Temperature
Operating Less than 85% R.H.
Humidity
Power Supply DC 1.5 V battery ( UM4, AAA ) x 6 PCs,
or equivalent.
Power Current Stand by Approx. DC 4 mA.
Testing Approx. DC 12 mA.
Weight 320 g/0.70 LB.
@ Battery is included.
Dimension 155 x 76 x 62 mm
( 6.1 x 3.0 x 2.4 inch)
Accessories * Instruction manual.........................
.
1 PC
Included * 1.0 ppm Free Chlorine standard
solution, CF-01...............................1 PC
* 1.0 ppm Total Chlorine standard
solution, CT-01...............................1 PC
* Zero Chlorine standard solution,
CL-01 1 PC
* Empty testin
g
bottle.......................
.
2 PCs
* Clean cloth.....................................1 PC
* Free Chlorine DPD powder..............
.
10 PCs
*
T
otal Chlorine DPD powder.............
.
10 PCs
Optional * Free Chlorine DPD powder ( 10 PCs ),
Accessories Model : CFP-10
* Total Chlorine DPD powder ( 10 PCs ),
Model : CTP-10
* Empty testing bottle, Model : 0601
* 1.0 ppm Free Chlorine standard
solution, Model : CF-01
* 1/0 ppm Total Chlorine standard
solution, Model : CT-01
* Zero Chlorine standard solution,
Model : CL-01
3
3. FRONT PANEL DESCRIPTION
3-1 Cover of Testin
g
bottle
3-2 Container of Testing bottle
3-3 Display
3-4 Hold Button ( Esc Button )
3-5 TEST/CAL Button
3-6 Power Button
3-7 ZERO Button
3-8 REC Button ( MAX, MIN Button )
3-9 Battery Compartment/Cover
3-10 Free Chlorine 1.0 ppm standard solution.
3-11 Total Chlorine 1.0 ppm standard solution
3-12 Zero Chlorine standard solution
3-13 Empty testin
g
bottle 1
3-14 Empty testin
g
bottle 2
3-15 Clean Cloth
3-16 Free Chlorine DPD powder ( 10 PCs )
3-17 Total Chlorine DPD powder ( 10 PCs )
4
4. MEASURING PROCEDURE
4-1 Measurement Consideration
White mark
on the up
position of
" Testing
Bottle "
White mark
on the edge of the " Container "
Fig. 2
1)There is a " White mark " on the edge of the
" Container " ( 3-2, Fig. 1 ) and also on the up
position of " Testing Bottle " ( 3-10, 3-11, 3-12
3-13, 3-14 Fig. 1 ), refer Fig. 2.
2)
When make the
measurement ( or
calibration ), it should
keep the " Container
white mark " face to face
together with the
" Testing bottle white mark "
5
3)Insert the " Testing bottle " to the bottom of
" Container " ( 3-2, Fig. 1 ) completely.
4)Before the measurement, it should envelop in the
" Cover " ( 3-1, Fig. 1 ) completely.
Remark
:
Before the measurement, it should
keep the outside of Testing Bottle
under the dry condition and withou
t
existing any dust.
4-2 Measurement
Before the measurement, should select the
measurement model to " Free Chlorine " or " Total
Chlorine " first, the setting procedures refer to
chapter 4-3, page 8.
ZERO setting for the liquid
1)Power ON the meter by pressing the " Power Button "
( 3-6, Fig. 1 ) once.
T
he Display ( 3-3, Fig. 1 ) will show the text " Free (
T
OTAL ) " approx. 1 second. then show " CAL 0 ", now
the meter for the ZERO setting procedures.
2)Fill the measurement liquid into the " Testing bottle "
( 3-11, 3-12, Fig. 1 ) .
Attention :
Model 0601
It should fill th
e
10 mL
measuremen
t
liquid capacit
y
until its level
Fig. 3
up to the " level
marker " of the
" Testing bottle
"
6
3)Insert the " Testing bottle " to the bottom of
" Container " ( 3-2, Fig. 1 ) completely.
Before the measurement, it should envelop in the
" Cover " ( 3-1, Fig. 1 ) completely.
4)Press " Zero Button " ( 3-7, Fig. 1 ) once, the display
will show the text " tESt " ( TEST )" with flashing,
then show " 0.00 ".
Liquid with the DPD powder
5)Take away the " Testing bottle " with the measurement
liquid away from " Container " ( 3-2, Fig. 1 ).
Fill the DPD powder into the " Testing bottle "
with the measurement liquid. It should shake
the at least 10 seconds to keep the solution
under the uniform condition.
Remark :
* For the Free Chlorine measurement, it should use
the " Free Chlorine DPD powder ".
* For the Total Chlorine measurement, it should use
the " Total Chlorine DPD powder ".
7
6)Wait one minute approximately,
then insert the " Testing bottle " to the bottom of
" Container " ( 3-2, Fig. 1 ) completely.
Before the measurement, it should envelop in the
" Cover " ( 3-1, Fig. 1 ) completely.
7)Press " Test Button " ( 3-5, Fig. 1 ) once, the display
will show the text " tESt " ( TEST )" with flashing,
wait approx. 10 seconds, the Display will show
the measurement value.
Wash ( Reins ) the Testing bottle
* After the testing, it should wash ( reins )
the Testing Bottle by the Distill Water
4-3 Free/Total Chlorine mode selection
1)Meter is under the power off conditions.
Press " Hold Button " ( 3-4, Fig. 1 ) " REC Button " (
3-8, Fig. 1 ) at the same time ( not release ), then
press the " Power Button " ( 3-6, Fig. 1 ) will enter the
selection mode to select the function of " Free
Chlorine " or the " Total Chlorine ".
2)Press the " TEST Button " ( 3-5, Fig. 1 ) to select the
desiring function ( Free Chlorine or Total Chlorine ),
then " REC Button " to confirm and save the selection
mode into the memory.
Remark :
* For the swinging pool application, typical to
select the " Free Chlorine " function.
* For the industrial water pollution application, typical
to select the " Total Chlorine " function.
8
Table of contents
Other Lutron Electronics Measuring Instrument manuals
Lutron Electronics
Lutron Electronics PDO-519 User manual
Lutron Electronics
Lutron Electronics SL-4011 Installation manual
Lutron Electronics
Lutron Electronics SL-4010 User manual
Lutron Electronics
Lutron Electronics CD-4317SD User manual
Lutron Electronics
Lutron Electronics DM-9027T User manual
Lutron Electronics
Lutron Electronics HT-305 User manual
Lutron Electronics
Lutron Electronics AM-4201 User manual
Lutron Electronics
Lutron Electronics DT-2230 User manual
Lutron Electronics
Lutron Electronics FR-5105 User manual
Lutron Electronics
Lutron Electronics DW-6093 User manual
Lutron Electronics
Lutron Electronics PM-9112SD User manual
Lutron Electronics
Lutron Electronics SL-4112 User manual
Lutron Electronics
Lutron Electronics AQ-9901SD Installation manual
Lutron Electronics
Lutron Electronics PCO-350 User manual
Lutron Electronics
Lutron Electronics GCO-2008 User manual
Lutron Electronics
Lutron Electronics SOIL PH METER User manual
Lutron Electronics
Lutron Electronics LCR-9083 User manual
Lutron Electronics
Lutron Electronics DW-6195 User manual
Lutron Electronics
Lutron Electronics vt-8204 User manual
Lutron Electronics
Lutron Electronics CO2-9904SD User manual
