LTH Electronics MXD70 Series User manual
MXD70 SERIES
Multi-parameter Monitor
User Interface Guide
Preface
User Interface Guide - 1 -
Preface
Product warranty
The MXD70 Series has a arranty against defects in materials and orkmanship for three
years from the date of shipment. During this period LTH ill, at its o n discretion, either
repair or replace products that prove to be defective. The associated soft are is provided
‘as is’ ithout arranty.
Limitation of warranty
The foregoing arranty does not cover damage caused by accidental misuse, abuse,
neglect, misapplication or modification.
No arranty of fitness for a particular purpose is offered. The user assumes the entire risk of
using the product. Any liability of LTH is limited exclusively to the replacement of defective
materials or orkmanship.
Disclaimer
LTH Electronics Ltd reserves the right to make changes to this manual or the instrument
ithout notice, as part of our policy of continued developments and improvements.
All care has been taken to ensure accuracy of information contained in this manual.
Ho ever, e cannot accept responsibility for any errors or damages resulting from errors
or inaccuracies of information herein.
Copyright and trademarks
All rights reserved. Translations, reprinting or copying by any means of this manual,
complete or in part or in any different form requires our explicit approval.
MXD70 is a trademark of LTH Electronics Ltd
Second edition: October 2011
LTH Electronics Ltd
Chaul End Lane
Luton Telephone : +44 (0)1582 593693
Bedfordshire Fax : +44 (0)1582 598036
England Web : .lth.co.uk
Preface
- 2 -
User Interface Guide
Manufacturing Standards
Electromagnetic compati ility
This instrument has been designed to comply ith the standards and regulations set do n
by the European EMC Directive 2004/108/EC using BS EN 61326: 2006
Safety
This instrument has been designed to comply ith the standards and regulations set do n
by the European Lo Voltage Directive 2006/95/EC using BS EN 61010-1: 2001
Quality
This instrument has been manufactured under the follo ing quality standard:
ISO 9001:2008. Certificate No: FM 13843
Note: The standards referred to in the design and construction of LTH products are those
prevailing at the time of product launch. As the standards are altered from time to time, e
reserve the right to include design modifications that are deemed necessary to comply
ith the ne or revised regulations.
Contents
User Interface Guide - 3 -
Contents
Preface.........................................................................................................................1
Contents .....................................................................................................................3
User Interface............................................................................................................5
The Front Screen...............................................................................................5
The Menu System .............................................................................................6
Security Code Access.............................................................................................9
Access Code Management......................................................................... 10
Enter Ne Code.............................................................................................. 11
Configuration ........................................................................................................ 13
Main Menu........................................................................................................ 13
Time / Date....................................................................................................... 13
Change Display Contrast ............................................................................ 14
Setup Front Screen........................................................................................ 15
Setup Menu Header...................................................................................... 16
Service Alarms................................................................................................. 17
Update Soft are .................................................................................................. 19
Error Messages...................................................................................................... 21
Save, Restore & Reset.......................................................................................... 23
Index ......................................................................................................................... 26
Contents
- 4 -
User Interface Guide
User Interface
User Interface Guide - 5 -
User Interface
User Interface
CAUTION! BEFORE PROCEEDING, ENSURE THAT THE INSTALLATION INSTRUCTIONS HAVE BEEN
FOLLOWED CORRECTLY. FAILURE TO DO SO MAY RESULT IN AN ELECTRICALLY HAZARDOUS
INSTALLATION OR IRREPARABLE DAMAGE TO THE INSTRUMENT.
The MXD70 Series uses a high quality backlit 3¾” QVGA LCD to display the channel readings and
settings. This is accompanied by 5 control buttons hose function varies depending upon hich
screen the user is vie ing. The button function is indicated by the control section at the bottom of the
display. Also present are six Setpoint Status LEDs that hen illuminated indicate hich setpoint / relay
is active. Located bet een the setpoint LEDs there are t o Alarm Status LEDs hich provide clear
indication of a fault ithin the instrument.
The Front Screen
The MXD70 Series front screen has the capability of sho ing up to three sensor input channels. Each
channel sho s the main sensor reading and t o secondary readings hich can be customised to the
users requirement. If only one channel is displayed on the front screen then the ability to sho up to
t o current output trends becomes available. Alternatively a current outputs trend screen is available.
See Setup Front Screen on page 15 for more information.
User Interface
- 6 -
User Interface Guide
User Interface
Front Screen Trends Current Output Trends
The Menu System
When the instrument is s itched on it ill complete a configuration check that ill take approximately
60 seconds after this it ill default to the front screen. The user interface is arranged in t o ays, the
first is a quick configuration overvie hich is accessible by scrolling left or right from the front screen
as sho n belo .
Scrolling Menu Layout
The second menu is accessible by pressing the menu button on the front screen. This then brings up
the main menu from hich the user can access the instruments settings.
The main menu is split into t o main sections. The top sho s the current time & date, the unit status
and the instrument’s current readings. The bottom section sho s the current options for that menu
hich may be selected by moving the cursor ith the arro buttons and pressing the enter button.
The exit button is used to return to the previous menu or alternatively if held do n for 3 seconds ill
take the instrument straight back to the front screen. If no buttons are pressed after 2 minutes the
instrument ill default back to the front screen. To the right of the menu screen arro s ill indicate if
there are further menu pages above or belo the current one.
User Interface
User Interface Guide - 7 -
User Interface
When changing a setting an option pop-up ill appear from hich the user can select an option or
alternatively enter in a value. Note hen looking at a list of options an arro in the top right or bottom
right corner of the pop-up indicates further options above or belo the ones currently sho n.
User Interface
- 8 -
User Interface Guide
User Interface
Other manuals for MXD70 Series
2
Table of contents
Other LTH Electronics Measuring Instrument manuals
