Lovibond Tintometer XD 7500 User manual

www.lovibond.com

Lovibond®Water Testing

Tintometer®Group

Photometer XD 7500

(1 (6 )5 ,7

37 3/ 1/ =+-$

Quickstart-Guide

ba77195y01

XD 7500

ba77195y01 09/2017

EN English Quick start guide 3

DE Deutsch Kurzanleitung 19

ES Español Breve manual 35

FR Français Notice d'utilisation de base 51

IT Italiano Manuale breve 67

PT Português Instruções de utilização básicas 83

PL Polski Podstawowa instrukcja obsługi 99

NL Nederlands Basis-gebruikershandleiding 115

ZH 中文基础版操作说明书 131

JA 日本語取扱説明書 147

XD 7500 English

ba77195y01 09/2017

Basic operating instructions

1 Safety

1.1 General notes

Any use other than the intended use, non-compliance with these operating

instructions, deployment of insufficiently qualified personnel and

unauthorized modifications on the instrument will void the manufacturer's

liability and warranty for damages and subsequent damages therefrom.

The manufacturer is not liable for costs or damages incurred by the user or

third party resulting from the use of this instrument, specifically in the event

of unintended use of the instrument or misuse or malfunctions of the

connection or the instrument.

The manufacturer is not liable for misprints.

1.2 Safety information

1.2.1 Safety information in the operating manual

This operating manual provides important information on the safe operation

of the product. Read this operating manual thoroughly and make yourself

familiar with the product before putting it into operation or working with it.

The operating manual must be kept in the vicinity of the product so you can

always find the information you need.

Important safety instructions are highlighted in this operating manual. They

are indicated by the warning symbol (triangle) in the left column. The signal

word (e.g. "CAUTION") indicates the level of danger:

WARNING

indicates a possibly dangerous situation that can lead to serious

(irreversible) injury or death if the safety instruction is not followed.

CAUTION

indicates a possibly dangerous situation that can lead to slight

(reversible) injury if the safety instruction is not followed.

NOTE

indicates a situation where goods might be damaged if the actions mentioned

are not taken.

1.2.2 Safety signs on the product

Note all labels, information signs and safety symbols on the product.

A warning symbol (triangle) without text refers to safety information in this

operating manual.

4ba77195y01 09/2017

English XD 7500

1.3 Safe operation

1.3.1 Authorized use

The authorized use of the photometer consists exclusively of the carrying out

of photometric measurements according to this operating manual. Any other

use is considered unauthorized.

1.3.2 Requirements for safe operation

Note the following points for safe operation:

The product may only be operated according to the authorized use

specified above.

The product may only be supplied with power by the energy sources

mentioned in this operating manual.

The product may only be operated under the environmental conditions

mentioned in this operating manual.

The product may not be opened.

1.3.3 Unauthorized use

The product must not be put into operation if:

it is visibly damaged (e.g. after being transported)

it was stored under adverse conditions for a lengthy period of time

(storing conditions, see Chapter 8 TECHNICAL DATA)

1.4 Handling of hazardous substances

When developing test sets, Tintometer carefully sees that the tests can be

carried out as safely as possible. Some hazards by dangerous substances,

however, cannot always be avoided.

If self-produced tests or solutions are used, the responsibility concerning any

risks caused by those tests or solutions lies with the user (personal

responsibility).

WARNING

Improper handling of certain reagents can cause damage to your

health.

In any case follow the safety labels on the packing and the safety

instructions of the package insert. Protective measures specified there

have to be followed exactly.

Safety datasheets The safety datasheets of the chemicals comprise all instructions on safe

handling, occurring hazards, preventive actions and actions to take in

hazardous situations. Follow these instructions in order to work safely.

XD 7500 English

ba77195y01 09/2017

2 Overview

2.1 Scope of delivery

Spectrophotometer XD 7500

Power pack with connection cable

Buffer batteries 4 x AA alkaline manganese (Mignon)

Zero cell (16 mm, round)

Short instructions

CD-ROM with

– Detailed operating manual

– Analysis instructions

2.2 Overview of the instrument

Front of the

instrument

1 Display

2 Keypad

3 Shaft for rectangular cells

4 Turn-up lid

5 Shaft for round cells 16 mm

6 Cell shaft cover

7 Shaft for round cells 24 mm

Figure 2-1 Front of the instrument with operating elements

6ba77195y01 09/2017

English XD 7500

Socket field on

the rear panel

2.3 Keypad

Overview

8 Connection for power pack

9 Ethernet connection

10 USB-A connection

11 USB-B connection

Figure 2-2 Rear panel with socket field

All connections comply with SELV.

8910 11

1 Function keys F1 to F4 (function menu-depending)

2 Alphanumeric keypad

3 Keys with dedicated function

Figure 2-3 Keypad

F1 F2 F3 F4

123

456

789

-0.

GHI

PQRS

ABC

JKL

TUV

DEF

MNO

WXYZ

Esc

START

ENTER

Zero

XD 7500 English

ba77195y01 09/2017

Key functions The keys on the right side of the keypad have the following functions:

Function keys The function keys F1 to F4 have different functions depending on the

operating situation. The current functions are displayed in the function

key menu at the bottom edge of the display (see Section 4.2).

Key Designation Functions

<ON/OFF> – Switches on and off the photometer

<HOME> – Switches to the main menu from any operating

situation. Actions that are not completed are canceled.

<PRINT> – Outputs the displayed measured value to an interface.

<STORE> – Saves a displayed measured value or spectrum

<ZERO·BLANK> – Starts one of the following measurements, depending

on the operating situation:

- Zero adjustment

- Blank value measurement

- Baseline measurement

- User calibration

<TIMER> – Opens the menu, Timer.

<ESC> – Cancels the running action. Entries that have not yet

been accepted are discarded.

– Switches to the next higher menu level.

<START·ENTER> – Starts an action (e.g. measurement)

– Opens a selected menu

– Confirms a selection or entry

(Arrow keys)

<><>– Moves the selection in menus and lists one position

up or down

<>– Deletes the character left of the cursor during character

entries

– Moves the cursor to the left in a spectrum or

kinetic diagram

<>– Moves the cursor to the right in a spectrum or

kinetic diagram

Zero

Esc

START

ENTER

8ba77195y01 09/2017

English XD 7500

2.4 Display

Display elements

Symbols in the

status line

3 Commissioning

3.1 General notes on handling

Always protect the photometer XD 7500 from conditions that could damage

the mechanical, optical and electronic components. Heed the following points

especially:

The temperature and humidity during operation and storage must be

within the limits specified in Chapter 8 TECHNICAL DATA.

The following influences always have to be avoided with the meter:

– Extreme dust, moisture and wetness

– Exposure to intensive light and heat

– Fumes that are corrosive or contain high concentrations of solvents.

For measuring, the meter must be placed on a flat surface.

Spilled liquid or other material must be removed immediately.

1 Status line (current state, date and time)

2 Display range for menus and measurement results

3 Function keys menu

Figure 2-4 Display

Concentration 16.01.15 9:52

1.92mg/l

18: 14752 NH4-N

10 mm 0.05 - 3.00 mg/l

Setup Method list Citation form Unit

Symbol Designation Function

Save The <STORE> key is active.

You can store the displayed data with

<STORE>.

Printer The <PRINT> key is active.

You can output the displayed data to an

interface with <PRINT>.

XD 7500 English

ba77195y01 09/2017

If a cell has broken in the cell shaft, the cell shaft must be cleaned

immediately (see Section 5.2 ACTIONS IN THE CASE OF ABROKEN CELL).

The cell shaft should always be closed when the photometer is not used.

For the instrument to be transported the cell shaft has to be empty.

For mobile use, we recommend using the transport case.

3.2 Initial commissioning

Perform the following activities:

Insert the buffer batteries (see Section 3.2.1)

Connect the power supply (see Section 3.2.2)

Switch on the photometer (see Section 3.2.3)

Set the language (see Section 3.2.3)

Set the date and time (see Section 3.2.4)

Carry out a zero adjustment

Packing This photometer is sent out in a protective transport packing.

CAUTION

Keep the original packing including the inner packing to protect the

instrument against hard shocks if it has to be transported.

3.2.1 Inserting the buffer batteries

The back-up batteries supply the integrated clock when the photometer is

switched off. There are four alkaline manganese back-up batteries (type AA

or Mignon) that are separately included in the delivery.

Insert the batteries as follows:

10 ba77195y01 09/2017

English XD 7500

3.2.2 Connecting the power supply

CAUTION

The line voltage of the usage location must fulfill the specifications

stated on the power pack (the specifications are also given in Chapter 8

TECHNICAL DATA). Always use the supplied 12 V original power pack

only.

Before plugging in the power cable check whether it is undamaged.

If the power cable is damaged, the instrument must not be operated.

Connect the

power pack

1Turn the photometer upside down

and place it on a soft surface.

2Open the lid of the battery

compartment (1).

3Insert the four batteries in

the battery compartment.

The ± indicators in the battery

compartment must match the

± indicators on the batteries.

4Close the lid of the battery

compartment.

1Connect the miniplug of the power

pack to the socket (1) of the

photometer.

2Connect the power pack to an

easily accessible power outlet.

Table of contents

Languages:

Other Lovibond Measuring Instrument manuals

Lovibond

Lovibond PM 620 User manual

Lovibond

Lovibond Scuba II User manual

Lovibond

Lovibond SD 50 User manual

Lovibond

Lovibond RT300 User manual

Lovibond

Lovibond SD 90 User manual

Lovibond

Lovibond SD 60 User manual

Lovibond

Lovibond Scuba II User manual

Lovibond

Lovibond ORPTester10 User manual

Lovibond

Lovibond Maxi Direct User manual

Lovibond

Lovibond MD 610 User manual

Lovibond

Lovibond SD 50 pH User manual

Lovibond

Lovibond SensoDirect Con200 User manual

Lovibond

Lovibond MD200 User manual

Lovibond

Lovibond Photometer-System MD100 User manual

Lovibond

Lovibond Tintometer SensoDirect Salt110 User manual

Lovibond

Lovibond Photometer-System MD100 User manual

Lovibond

Lovibond SD 60 REDOX User manual

Lovibond

Lovibond MD200 User manual

Lovibond

Lovibond MD200 User manual

Lovibond

Lovibond TB300 IR User manual

Lovibond

Lovibond CheckitDirect User manual

Lovibond

Lovibond SD 300 pH User manual

Lovibond

Lovibond SWIMTEC MD100 User manual

Lovibond

Lovibond MD200 User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual