LINSHANG LS200 User manual

Shenzhen Linshang Technology Co., Ltd

2015-11-18 Page 1 of 5

LS200

Glass Thickness Meter

User Manual V5.0

Please read this manual carefully before using and reserve it for reference.

Shenzhen Linshang Technology Co., Ltd

2015-11-18 Page 2 of 5

I. Product introduction

The Glass Thickness Meter is mainly used on measuring glass and air space in insulated glass (IG), it

also can measure individual panes of glass and the thickness of a glass bottle etc, special for those

situations where common ruler can not easily do it.

This Thickness Meter utilizes the light reflection principle to achieve its function. When laser is set against

the surface of glass, Laser reflection beams off the surfaces of glass appear on the graduated scale of the

meter. The readings are taken from a single side of glass and the user can get the thicknesses of glass,

the air space at the same time. High quality red laser gives the reliable measuring result.

II. Parameters

1. Dimensions: 160mm*55mm*25mm (L*W*H)

2. Range: Glass Thickness Scale 70mm, Air Space Scale 34mm

3. Weigh: 250g

4. Resolution: ± 0.5mm

5. Power Supply: CR2032 battery 3V

6. Minimum measurement size: 10mm*100mm

III. Operation

Prior to every reading, verify the meter is resting flatly against the glass surface. Do not tilt the meter or

place any items under the meter when taking readings. Tilting the meter in any way will adversely affect

the accuracy of the readings.

The meter can easily measure glass thickness, air space, overall IG thickness, individual panes of glass

in a laminated assembly, bullet resistant and triple pane assemblies. The meter also has been

successfully tested for measuring thickness of mirrors and other transparent materials.

Shenzhen Linshang Technology Co., Ltd

2015-11-18 Page 3 of 5

For single pane glass two reflection beams will occur, double glazing four beams will occur, Triple glazing,

six beams will occur.

IV. Measure thickness of IG units

Put the meter flatly against the insulated glass surface (two layers), press the Power Switch and hold on,

4 red reflection beams will be seen on the scale. The reflection beams “C” and “D” is the thickness of the

first layer glass on “GLASS THICKNESS” scale, “D” will align with the “zero point “, and so the thickness

of first layer glass is the number of “C” on the “GLASS THICKNESS scale.

 A =30mm,B=25mm,C=5mm,D=0mm.

 The thickness of first layer glass is C – D=5mm.

 the thickness of bottom layer is A – B =5mm.

Distance between B and C on the “AIR SPACE THICKNESS” scale is the air space.

 B =12mm,C=2.4mm.

 The thickness of the air space is B – C = 9.6mm.

V. Notes

1. It is imperative that the measured glass surfaces is kept clean and free of any debris, otherwise

causing incorrect readings.

2. Keep the scale clean; do not wipe the meter with alcohol, or other organic dissolvent.

Shenzhen Linshang Technology Co., Ltd

2015-11-18 Page 4 of 5

3. Replace the batteries. Remove the four screws located on the bottom surface of the meter. Replace

the CR2032 batteries and refasten the cover. Be sure to install the batteries correctly (polarity +/-).

4. Keep the meter far away from high temperature or high humidity.

5. This product emits a laser beam from the back side. Do not point the laser at anyone’s eyes. Always

check the other side of the window being tested to ensure that no one will be looking directly into the

laser.

VI. Standard packing list

No. Description Quantity Unit

1 Glass Thickness Meter 1 pcs

2 User Manual 1 pcs

3 Certificate / warranty card 1 pcs

4 Cloth packing bag 1 pcs

VII. Service

1. The meter has one-year warranty. If the meter works abnormally, please send the whole meter to the

company for maintenance

2. Provide users with spare parts and lifelong maintenance services

3. Provide the users with the meter inspection service for free

4. Free technical support for long term

Manufacturer: Shenzhen Linshang Technology co., ltd.

Website: www.linshangtech.com

Shenzhen Linshang Technology Co., Ltd

2015-11-18 Page 5 of 5

Service hotline: 086-755-86263411

Email: sales21@linshangtech.com

Table of contents

Other LINSHANG Measuring Instrument manuals

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual