Lilin IPG1022ELS User manual

Instruction Manual

66-IPG1022LCSE

IPG1022ELS / IPG1022ELSX

MERIT LILIN ENT. CO., LTD

http://www.meritlilin.com

Day & Night 1080P HD IP Camera

IMPORTANT SAFEGUARDS

GRAPHIC SYMBOL EXPLANATION

The lightning flash with arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of

uninsulated "dangerous voltage" within the product's enclosure

that may be of sufficient magnitude to constitute a risk of electric

The exclamation point within an equilateral triangle is intended

to alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature

shock to persons.

accompanying the unit.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION：

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED

BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING

TO THE INSTRUCTIONS

CAUTION

Do not drop or strike this equipment.

Sensitive electronics inside are vulnerable to excessive shock.

Do not install the equipment near any naked flames or heat

sources.

Excessive heat could damage this unit.

Do not expose this unit to rain or excessive moisture, avoid

smoke and dust.

Please the camera in an environmental housing for protection.

If the camera gets wet, unplug it and have it checked by

qualified service personnel.

Do not cover cloth or to install this unit in poorly ventilated

places.

This may lead to overheating.

Do not continue to operate if there appears to be fault.

If the unit ceases to function, contact qualified service

personnel for help.

Do not touch the power connection with wet hands.

Risk of short circuit or electric shock.

Do not damage the power cord or leave it under pressure.

Risk of fire or shock circuit.

CONGRATULATIONS

Thank you for purchasing this D/N 1080P HD IP Camera. You now

own one of the many fine network products we manufactured.

This product has been carefully inspected under rigid quality

control and should reach you in perfect condition. With reasonable

care, it will provide years of reliable performance.

We recommend that you read this installation and operation

manual thoroughly before installing and operation your new

system.

Here you will find all the information you need to set up and use

the system. If any questions are not answered in the manual,

please contact your dealer.

Before proceeding, please read and observe all instructions and

warnings contained in this manual. Retain this manual with the

original bill of sale for future reference and, if necessary, warranty

service.

When unpacking your new camera, check for missing or damaged

items. If any item is missing, or if damage is evident, DO NOT

INSTALL OR OPERATE THIS PRODUCT. Contact your dealer for

assistance.

IPG1022ELS series is an 2 megapixel Day&Night 1080P HD IP

Camera, built-in H.264 AVC(Advanced Video Coding) video

compression. H.264 AVC video compression engine supports

high definition video quality, 1080P(1920x1080) resolution,

bandwidth efficiency with PPPoE and DDNS.

Also it provides higher bit rate of internet and diverse alarm

functions such as movement video detection e-mail or FTP.

Moreover, IPG1022ELS series can do remote surveillance with

iPad, iPhone or Android cell phone. The software R&D engineer

can use HTTP protocol(HTTPAPI) or ONVIF protocol to develop

related software, and integrate them with existing application

software system.

IPG1022ELS series is ideal solution for remote video monitoring

via internet.

Executive Summary

PART DESCRIPTION & DIMENSION

122mm

50mm

70mm

7 14 8

1. LENS MOUNT CAP

2. FOCAL LENGTH ADJUSTMENT RING AND LOCKING SCREW

　Use this ring to adjusts the back-focal distance or picture focus. Rotate this

　ring clockwise or counterclockwise for a CS-mount lens.

3. MICROPHONE

　Built-in highly sensitive capacitive microphone.

4. LIGHT SENSOR

　Day and night function auto mode detect.

5. AUTO IRIS CONNECTOR(DC Type)

　Supplies control signals to an auto iris lens(jack not supplied).

6. POWER LED

　Power ON/OFF indicator.

7. LIVE VIDEO BNC JACK

　Plug the video input of monitor to the BNC jack and adjust focus and zoom.

8. RESET KEY

　To restore the server to factory default setting.

9. RJ-45 NETWORK CONNECTOR AND INDICATOR LEDS

　Green(LINK): While cable of network is connecting the LED is light.

　Orange(ACT): When data is communicating, the LED is flashed.

　(This network camera support PoE.)

10. AUDIO INPUT 3.5mm PHONE JACK

　 Can be accessed by an external microphone or audio input signal.

　 (Choose from the audio settings menu to switch)

Prevent damages to the image sensor and to keep dust away.

11. AUDIO OUTPUT 3.5mm PHONE JACK

12. DC12V POWER INPUT JACK

　 DC12V (±10%) power input.

13. Micro SD CARD SLOT

　 This network camera is compliant with Micro SD/SDHC card.

14. ALARM IN/OUT & EXTIN TERMINAL +5V COM. GND

N.O. DIN

1 2 3 4 5 6

EXTIN

+5V Output: Max. output 50mA.

N.O./COM.: Max. load +60V/100mA.

DIN terminal can be set either N.O. (normally open) or N.C. (normally

close) mode.

EXTIN: IR cut removable external control input.

IR CUT REMOVABLE EXTERNAL CONTROL SETUP

Access into web page setup menu, under schedule menu, enable External

Control option.

External input mode: normally open(NO) or normally closed(NC) mode is

selectable.

External input dwell: may select 1, 2, 5, 10, 15, 20, 30 seconds delay time

interval to avoid wrong operation caused by headlight

of the front light.

AUDIO INPUT MODE SETUP

Access into web page setup menu, under audio adjustment setup menu,

may select Audio Input mode to either camera front microphone or rear's

Audio In (Line IN).

INSTALLATION

The lens must be either a C or CS mount type. The protrusion behind the

mounting surface must be within the following limits:

SUITABLE LENSES

C - mount lens CS - mount lens

9mm or less 4mm or less

FITTING THE LENS

Remove the lens mount cap.

Screw in the C mount ring(not supplied), until it is secured. When using a

CS mount lens skip step2.

Screw in the lens, until it is secured.

Insert the lens plug in the AUTO IRIS connector, when fitting a manual-

iris lens, skip step4.

Adjust the focal length by turning the focal length adjustment ring.

(Using hexagon screw driver, loose and tighten the screw.)

This manual suits for next models

Table of contents

Popular IP Camera manuals by other brands

FLIR

FLIR Exx series user manual

Avigilon

Avigilon H4A-BO1-IR installation guide

Digital Watchdog

Digital Watchdog DWCA-C128-64 manual

ShareTech

ShareTech AV1 user manual

Ezviz

Ezviz C6C quick start guide

Melchioni

Melchioni UCAM 2015 manual

Geutebruck

Geutebruck G-Cam/ESD-4630 quick guide

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG installation manual

Mitel

Mitel 6800i Series Administrator's guide

Vitek

Vitek VTC-IR403-212NP quick start guide

THOMSON

THOMSON DSC - 323W user guide

AVer

AVer FB2027 user manual

ENFORCER

ENFORCER EV-T5105-N2SQ manual

Wansview

Wansview NC543 user manual

Eneo

Eneo MCB-64A0003M0A Quick installation guide

deView electronics

deView electronics CBDNI36F instruction manual

Swann

Swann SwannEye user manual

LevelOne

LevelOne IP CamSecure user manual