Contents
1. Brief description 5
2. Assembly 6
.
8
4. Description of function and operation 10
5. Setting up the device 12
5.1. Switching on 12
5.2. Standard parameterisation (flat operation level) 12
Value assignment for the triggering of the signal input of the digital display and bargraph display
53 P i i t l k5.3. Programming interlock „RUN“ 17
Activiation/Deactivation of the programming interlock or change into professional operation level
respectively back into flat operation level
5.4. Extended parameterisation (professional operation level) 18
5.4.1. Signal input parameters „INP“
Value assignment for the triggering of the signal input incl. linearisation of the digital display and
the bargraph display
5 4 2 General device parameters FCT“5.4.2. General device parameters „FCT 22
Superior device functions like HOLD, TARA, min/max permanent, setpoint value function /
nominal value function, averaging, brightness control, as well as the control of the digital input and
keyboard layout
5.4.3. Bargraph functions „bar“
Assignment of the bargraph to superior functions like min/max, totaliser, HOLD or
sliding averaging
5 4 4 Safety parameters Cd“5.4.4. Safety parameters „Cod“29
Assignment of user and master code for locking respectively for access to defined parameters
like e.g. analog output and alarms, etc.
5.4.5. Analog output parameters „Out“30
Analog output functions
5.4.6. Relay functions „rel“32
Parameters for the definition of the setpoints
547 Al t “5.4.7. Alarm parameters „AL1…AL4“34
Actuator and dependencies of the alarms
5.4.8. Totaliser (Volume metering) „tot“36
Parameters for the calculation of the sum function
6. Reset to factory settings 37
Reset parameters to delivery state
7. Alarms / Relay 38
Functional principle of the switching outputs
8. Programmer examples 39
Examples of use e.g. the calculation of the input frequency or the adjustment of unknown
rotational speed
9. Technical data 41
10. Safety advices 43
11. Error elimination 44
3
12. EU Declaration of Conformance 45
18
27
