JVC GV-LS2 Instruction Manual
1
LYT2644-002A
0513YHM-YH-OT
C2N
Live Streaming Camera
GV-LS2 / GV-LS1
Connection Guide
This PDF will give you the steps in order to connect the Live Streaming
Camera to your network and digital devices.
Other information can be found in the Reference Manual.
Connecting wirelessly to the camera (Wi-Fi direct) ⇒Go to page 2
Connecting wirelessly via a Wi-Fi LAN router ⇒Go to page 7
Connecting to the camera from outside the house ⇒Go to page 16
Distribution on Ustream ⇒Go to page 24
2
Connecting wirelessly to the camera (Wi-Fi direct)
Android and iOS devices (e.g. iPhone, iPad) can be connected to the
camera directly without a Wi-Fi router.
* Before connecting to the camera, install the JVC CAM Control app.
(When connected to the camera, your devices will not be able to access
the Internet.)
1. Switch the network mode to
'
DIRECT
'
.
2. Connect the AC adapter.
Once you start the camera, the WPS button will blink slowly.
DIRECT WLAN
RESET
LAN(OFF)
ETHERNET
DC
AV
MIC
PLUG IN POWER
DIRECT WLAN
RESET
LAN(OFF)
ETHERNET
DC
AV
MIC
PLUG IN POWER
DIRECT WLAN
RESET
LAN(OFF)
ETHERNET
DC
AV
MIC
PLUG IN POWER
3
1. Tap on
'
Settings
'
on the application
menu screen.
2. Tap on
'
Wireless & networks
'.
3. Tap on
'
Wi-Fi settings
'
.
4. Tap on
'
Wi-Fi
'
.
Connecting with Android devices
4
5. Tap on 'DIRECT-**JVCCAM' (where **
indicates alphanumeric characters).
The default name is 'DIRECT-**JVCCAM'
(where ** indicates alphanumeric
characters).
6. Enter your password.
The default password is
'
password
'
.
7. Wait until connection is complete.
Connection is complete when
'Connected' appears on the display.
Now you can launch the app.
Screen images, names and/or steps may
dier depending on the device.
Note
8
1. Switch the network mode to 'WLAN'.
2. Connect the AC adapter.
3. Activate WPS on the wireless LAN router.
Refer to your wireless LAN router’s user manual for how to activate WPS.
4. Hold down the WPS button.
Once the WPS button stops blinking, connection is complete.
WPS button does not work during start up.
(The Record button will blink red during start up.
Wait for the Record button to stop blinking, then hold down the WPS button.)
DIRECT WLAN
RESET
LAN(OFF)
ETHERNET
DC
AV
MIC
PLUG IN POWER
DIRECT WLAN
RESET
LAN(OFF)
ETHERNET
DC
AV
MIC
PLUG IN POWER
DIRECT WLAN
RESET
LAN(OFF)
ETHERNET
DC
AV
MIC
PLUG IN POWER
If WPS is Supported
Note
9
1. Use the supplied LAN cable to connect your camera to the computer:
(1) Connect the LAN cable to the camera.
DIRECT WLAN
RESET
LAN(OFF)
ETHERNET
DC
AV
MIC
PLUG IN POWER
DIRECT WLAN
RESET
LAN(OFF)
ETHERNET
DC
AV
MIC
PLUG IN POWER
(2) Switch the network mode to 'LAN(OFF)'.
DIRECT WLAN
RESET
LAN(OFF)
ETHERNET
DC
AV
MIC
PLUG IN POWER
DIRECT WLAN
RESET
LAN(OFF)
ETHERNET
DC
AV
MIC
PLUG IN POWER
(3) Connect the AC adapter.
• A LAN cable cannot be used when the network mode is switched to 'DIRECT' or 'WLAN'.
• Settings will not be changed unless you turn the power OFF before switching the
network mode.
DIRECT WLAN
RESET
LAN(OFF)
ETHERNET
DC
AV
MIC
PLUG IN POWER
If WPS is Not Supported
10
2. Change the network settings on your computer:
Under Windows 7:
* For changing settings on OS versions other than Windows 7,
please refer to your computer’s user manual.
(1) Click on the Windows Start Menu.
(2) Click on [Control Panel] ⇒Click on [View Network Status and Tasks]
(3) Click on [Local Area Connection]
* Button names may dier depending on your computer
Other manuals for GV-LS2
3
This manual suits for next models
1
Table of contents
Other JVC IP Camera manuals
JVC
JVC VN-X35U - Network Camera User manual
JVC
JVC LST0886-001A User manual
JVC
JVC VN-X35U - Network Camera User manual
JVC
JVC GV-LS2 User manual
JVC
JVC VN-T16 User manual
JVC
JVC VN-T16U User manual
JVC
JVC Super LoLux HD VN-H157WPU User manual
JVC
JVC VN-V25U VN-V26U User manual
JVC
JVC VN-H57U Series User manual
JVC
JVC SuperLoLux TK-C8301RU User manual
