Interroll SH 1400 User manual

INSPIRED BY EFFICIENCY

Installation and Operating Instructions

Interroll Transfer module

SH 1400

Rated width 410 mm (S), 715 mm (M), 867 mm (L)

Version 1.0 (06/2022) en

Translation of original operating instructions

Manufacturer's address

Interroll Trommelmotoren GmbH

Center of Excellence Hygienic Solutions

Opelstraße 3

41836 Hueckelhoven/Baal (Germany)

www.interroll.com

Interroll Service

Our Service Team will gladly provide advice in case of questions or problems:

Hotline: +49 (0) 2193 - 23 222

E-mail: [email protected]

Contents

We strive for the information presented to be correct, up to date and complete. We have

carefully developed the contents of this document. Nevertheless, errors and changes are

expressly subject to change.

Texts, images, graphics and the like as well as their arrangement are protected by

of any part or the entire content of the document in any form is prohibited. This

document is intended exclusively for information purposes and for intended use and does

not authorize replicating the respective products. All signs contained in this document

(registered trademarks, such as logos and business designations) are the property of

Interroll Trommelmotoren GmbH or third parties and may not be used, copied or

distributed without prior written consent.

Interroll T. Nr. 1131904

Version 1.0 (06/2022) en

Translation of original operating instructions

Interroll Transfer module SH 1400

Version 1.0 (06/2022) en

Translation of original operating instructions

Table of contents

Introduction............................................................................................................................ 6

Notes about working with the installation and operating instructions...................................... 6

Contents of these installation and operating instructions ...................................................... 6

Integrated part of the product ...................................................................................................... 6

Installation and operating instructions are part of the module............................................ 6

Warning notices in this document........................................................................................................ 7

Symbols....................................................................................................................................................... 7

Safety ..................................................................................................................................... 8

State of the art ......................................................................................................................................... 8

Intended use .............................................................................................................................................. 8

Field of use.......................................................................................................................................... 8

Changes to the module ................................................................................................................... 8

Unintended use......................................................................................................................................... 9

Personnel qualification ............................................................................................................................ 9

Operators............................................................................................................................................ 9

Service personnel.............................................................................................................................. 9

Electricians........................................................................................................................................... 9

Personal protective equipment ............................................................................................................. 10

Dangers ...................................................................................................................................................... 11

Safety devices.................................................................................................................................... 11

Heat ...................................................................................................................................................... 11

Electricity.............................................................................................................................................. 11

Rotating parts..................................................................................................................................... 11

Parts lying around or falling off .................................................................................................... 11

Risk of injury due to faults during operation.............................................................................. 11

Insufficient hygiene............................................................................................................................ 11

Maintenance intervals............................................................................................................................. 11

Interfaces to other devices .................................................................................................................... 12

Operating modes..................................................................................................................................... 12

Normal mode..................................................................................................................................... 12

Special mode...................................................................................................................................... 12

Product identification ........................................................................................................... 13

Transfer module (SH 1400)................................................................................................................... 13

Components........................................................................................................................................ 13

Property ............................................................................................................................................... 14

Technical data .................................................................................................................................... 14

Scope of supply........................................................................................................................................ 15

Nameplate................................................................................................................................................. 16

Transport and storage .......................................................................................................... 17

Transport..................................................................................................................................................... 17

After the delivery .............................................................................................................................. 17

Storage....................................................................................................................................................... 17

Interroll Transfer module SH 1400

Table of contents

4 Version 1.0 (06/2022) en

Translation of original operating instructions

Installation ............................................................................................................................. 18

To be observed during installation...................................................................................................... 18

Electrical installation ......................................................................................................................... 18

Torque................................................................................................................................................... 19

Grounding........................................................................................................................................... 19

Orientation.......................................................................................................................................... 19

Connection.......................................................................................................................................... 19

Anchoring............................................................................................................................................ 19

Integration into complete system .................................................................................................. 19

Connecting the modules......................................................................................................................... 20

Straight module belt conveyor (50) - transfer module ........................................................... 21

Initial startup and operation................................................................................................ 22

Initial startup.............................................................................................................................................. 22

Operation .................................................................................................................................................. 23

Before every operation start.......................................................................................................... 23

During operation............................................................................................................................... 23

Procedure in case of accident or fault ........................................................................................ 23

Cleaning................................................................................................................................. 24

Preparation for cleaning by hand....................................................................................................... 25

Manual cleaning....................................................................................................................................... 25

Resistance................................................................................................................................................... 27

Maintenance and repair ...................................................................................................... 28

Observe the following for maintenance and repair ...................................................................... 28

Maintenance intervals............................................................................................................................. 29

Maintenance and inspection list........................................................................................................... 29

Preparatory and follow-up maintenance work ............................................................................... 30

Installing/removing module between connecting tabs............................................................ 30

Replacing the module conveyor........................................................................................................... 32

Replacing the RollerDrive....................................................................................................................... 33

Replacing MultiControl ........................................................................................................................... 35

Replacing the knife edge........................................................................................................................ 36

Replacing sliding bars ............................................................................................................................. 37

Troubleshooting..................................................................................................................... 38

In case of a fault....................................................................................................................................... 38

Troubleshooting ........................................................................................................................................ 38

Spare and wear parts .......................................................................................................... 40

Ordering information.............................................................................................................................. 40

Spare parts drawing............................................................................................................................... 41

Spare parts list.......................................................................................................................................... 41

Decommissioning and disposal .......................................................................................... 42

Environmental protection regulations................................................................................................. 42

Interroll Transfer module SH 1400

Table of contents

Version 1.0 (06/2022) en

Translation of original operating instructions

Declaration of incorporation ............................................................................................... 43

Declaration of incorporation ............................................................................................... 45

Appendix ............................................................................................................................... 47

Warranty for Interroll module belt conveyors ................................................................................. 47

Restrictions........................................................................................................................................... 47

Exceptions............................................................................................................................................ 47

Interroll Service......................................................................................................................................... 47

Interroll Transfer module SH 1400

6 Version 1.0 (06/2022) en

Translation of original operating instructions

Introduction

Notes about working with the installation and operating instructions

The Interroll Ausschleuser product is generally referred to as "module" in this document.

Contents of these

installation and operating

instructions

These installation and operating instructions contain important notes and information about the

various operating phases of the module:

• Transport, assembly and startup

• Safe operation, required maintenance tasks, removal of any faults

• Spare parts, supplementary accessories

Integrated part of the

product

The installation and operating instructions describe the module at the time of its initial delivery

after manufacturing.

In addition to these installation and operating instructions, special contractual agreements and

technical documents apply to special versions of the module and its additional equipment.

Installation and operating

instructions are part of the

module

4To ensure trouble-free and safe operation, as well as the settlement of possible warranty

claims, always read these installation and operating instructions first and observe all

information contained herein.

4Keep the installation and operating instructions close to the module.

4Pass the installation and operating instructions on to any subsequent operator or occupant.

Interroll does not accept any liability for faults or defects due to non-observance of these

installation and operating instructions.

4If you have any questions after reading the installation and operating instructions, please

contact Interroll customer service. Contact persons near you can be found on the Internet

under: www.interroll.com/contact.

Interroll Transfer module SH 1400

Introduction

Version 1.0 (06/2022) en

Translation of original operating instructions

Warning notices in this document

The warning notices refer to risks which may arise while using the module. They are available in

four danger levels identified by the signal word:

Signal word Meaning

DANGER Identifies a danger with high risk that will result in death or serious

injury if it is not avoided.

WARNING Identifies a danger with medium risk that could result in death or

serious injury if it is not avoided.

CAUTION Identifies a danger with low risk that may result in minor or medium

injury if it is not avoided.

NOTICE Identifies a danger that results in property damages.

Symbols

This symbol marks useful and important information.

Requirement:

RThis symbol represents a prerequisite to be met prior to installation and maintenance work.

4This symbol marks the steps to be carried out.

Interroll Transfer module SH 1400

8 Version 1.0 (06/2022) en

Translation of original operating instructions

Safety

State of the art

The module has been built to comply with the state of the art. Nevertheless, users may encounter

hazards during its use.

Disregarding the notices in these installation and operating instructions may lead to life-

threatening injuries!

4Carefully read the installation and operating instructions and follow their content.

4Observe local accident prevention regulations and general safety regulations that apply in

the area of use.

Intended use

The module may only be used for industrial applications and in an industrial environment to

convey belt conveyor-ready goods, such as all types of boxes, packaged food or beverage units.

The module is an incomplete machine and must be integrated into a complete system prior to

operation.

Field of use The module is dimensioned only for a certain field of use and may not be operated outside of

these specific limits. For additional information, see the chapter "Technical Data".

Any other use is considered inappropriate. Deviating operating conditions require additional

clarifications, a special release of the module and new contractual agreements.

Changes to the module Any modifications that affect the safety are not permitted.

Interroll Transfer module SH 1400

Safety

Version 1.0 (06/2022) en

Translation of original operating instructions

Unintended use

Any use beyond the intended use is considered inappropriate or, if required, must be authorized

by Interroll Trommelmotoren GmbH. Setup and operation in explosive atmospheres is prohibited.

The use in a medical-pharmaceutical area requires the approval from Interroll.

The transport of persons is prohibited.

The transport of hazardous or damaging goods is prohibited.

The transport of hot or hygroscopic goods is prohibited.

Installation in unprotected rooms exposed to the weather or in areas where the technology

deteriorates and can fail due to the prevailing climatic conditions is considered inappropriate

use.

Use of the module is not intended for private end customers! Use in a residential area is

prohibited without additional assessment and without the use of EMC protective measures that

have been adapted accordingly!

Personnel qualification

Unqualified personnel cannot recognize risks and, as a result, is subject to greater dangers.

4Authorize only qualified personnel to perform the activities described in these instructions.

4The operating company must ensure that personnel follow locally applicable regulations and

rules about safety and hazards while working.

The following target groups are addressed in these instructions:

Operators Operators have been instructed in the operation and cleaning of the module and follow the

safety guidelines.

Service personnel The service personnel features a technical training and performs the maintenance and repair

tasks.

Electricians Persons working on electrical installations must have pertinent technical training.

Interroll Transfer module SH 1400

Safety

10 Version 1.0 (06/2022) en

Translation of original operating instructions

Personal protective equipment

4For all work, such as assembly, maintenance and cleaning tasks, wear personal protective

equipment that is suitable and appropriate for the hazard situation.

Close-fitting work clothing

Protective gloves

Safety shoes

Hard hat

Hearing protection

Table of contents

Other Interroll Industrial Equipment manuals

Interroll

Interroll Diverter SH 1500 User manual

Interroll

Interroll SH 1210 User manual

Interroll

Interroll SH 1100 User manual

Interroll

Interroll PF 1100 User manual

Interroll

Interroll PF 1100 User manual

Interroll

Interroll DL Series User manual

Popular Industrial Equipment manuals by other brands

ABB

ABB Unifix AD Instruction handbook

Mark 7

Mark 7 Evolution user manual

Husky

Husky HyPET Original instructions

bora

bora PM-1800 user manual

Grizzly

Grizzly T32428 owner's manual

Siemens

Siemens 8MF1 Series operating instructions

ABB

ABB HT610965 Operation manual

ABB

ABB SafeLink Installation and operating instructions

Phoenix

Phoenix PHX-150 user guide

ABB

ABB A165-L32 Operation manual

ABB

ABB HT842936 Operation manual

Rioned

Rioned UrbanJet user manual

Hermetica

Hermetica 10 Series user manual

HORNER

HORNER OEE Solution manual

Hammerhead

Hammerhead HG375 parts manual

SCHUNK

SCHUNK VERO-S NSE-A3 138 Assembly and operating manual

ABB

ABB HT566657 Operation manual

Webasto

Webasto GSE CAN installation guide