Interlogix TruVision TVD-2401 User manual

TruVision High Definition TVI Dome Installation

Guide

Product overview

This is the Installation Guide for TruVision High Definition TVI

dome TVD-2401/TVD-4401 and TVD-2403/TVD-4403. This

guide describes a standard installation.

Package contents:



Camera with power and

video output cables



3 screws and 3 anchors

for wall or ceiling

installation



Template



Installation Guide

•WEEE and Battery

Disposal



Camera description

TVD-2401/TVD-4401

1. Base

2. IR LED

3. Lens

4. Dome liner

5. Housing

6. Power supply

7. TVI Video output cable (grey)

TVD-2403/TVD-4403

1. Base

2. IR LED

3. Lens

4. Dome liner

5. Housing

6. Power supply

7. TVI video output cable

(grey)

8. CVBS video output cable

(black)

Note:

Please check the camera output settings before setting up a

system. The TVI video output can be only connected to DVR

with TVI signal input. The CVBS output supports the standard

monitor, test monitor, encoder and DVR.

For TVD-2403/TVD-4403, you can connect the white and black

line ends of the WDR switch cable to enable the Wide Dynamic

Range function. The WDR function is disabled by default. If

WDR is enabled, the CVBS output will be blocked out, and

only TVI output is available.

Installation

To install the camera on a ceiling:

1. Using the template, place it level against the mounting

surface and mark the position of the mounting holes.

2. Following all local codes, drill and prepare the mounting

holes.

Drill Template

Hole A: for cables routed through the ceiling

screw hole 1: for Mounting Base

2 / 3 P/N 1072939-EN • REV A • ISS 26MAR15

3. Loosen the screws with wrech to remove the housing.

4. Securely fasten the mounting base to the mounting

surface with the screws.

5. Using a 75 ohm coaxial video cable, connect the camera

TVI video output and a TVI DVR, and connect a 12 VDC

power supply to the camera power cable.

6. Adjust the surveillance angle according to the figure

below.

7. Re-attach the housing to the base.

Programming

Programming on TVI output:

Programming on TVI output is available for TVD-2403/TVD-

4403 only.

Once the camera hardware has been installed, you can

configure the camera settings on the TVI DVR.

Please select PTZ protocol as TruVision Coax and click menu

button to call up the camera menu.

For more details, please see the TVI DVR user manual.

Programming on CVBS output:

Programming on CVBS output is available for TVD-2403/TVD-

4403 only.

Programming on CVBS output, you need to connect a monitor

and a TVS-C200 controller (purchase separately) as following

system figure.

The TVS-C200 has one male BNC output and a female output.

Please connect the male output to camera’s CVBS output and

female output to a monitor.

Specifications

Power supply

12 VDC

Current

TVD-2401/TVD-4401:

Max. 300 mA

TVD-2403/TVD-4403:

Max.333 mA

Power consumption

TVD-2401/TVD-4401:

Max. 3.5W

TVD-2403/TVD-4403:

Max. 4W

Weight

345 g (0.76 lb.)

Dimensions

(Ø × L)

111 x 82 mm (4.4 x 3.2 in. )

Regulatory information

Manufacturer

Interlogix.

2955 Red Hill Avenue, Costa Mesa, CA 92626

5923, USA

Authorized EU manufacturing representative:

UTC Fire & Security B.V.

Kelvinstraat 7, 6003 DH Weert, The

Netherlands

FCC compliance

Class A: This equipment has been tested and

found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference when the equipment is operated

in a commercial environment. This equipment

generates, uses, and can radiate radio

frequency energy and, if not installed and

P/N 1072939-EN • REV A • ISS 26MAR15 3 / 3

used in accordance with the instruction

manual, may cause harmful interference to

radio communications. Operation of this

equipment in a residential area is likely to

cause harmful interference in which case the

user will be required to correct the interference

at his own expense.

ACMA compliance

Notice! This is a Class A product. In a

domestic environment this product may cause

radio interference in which case the user may

be required to take adequate measures.

Canada

This Class A digital apparatus complies with

Canadian ICES-003.

Cet appareil numérique de la classe A est

conforme à la norme NMB-0330 du Canada.

Certification

N4131

European Union

directives

12004/108/EC (EMC directive): Hereby, UTC

Fire & Security declares that this device is in

compliance with the essential requirements

and other relevant provisions of Directive

2004/108/EC.

2012/19/EU (WEEE directive): Products

marked with this symbol cannot be disposed

of as unsorted municipal waste in the

European Union. For proper recycling, return

this product to your local supplier upon the

purchase of equivalent new equipment, or

dispose of it at designated collection points.

For more information see:

www.recyclethis.info.

Interlogix is part of UTC Building & Industrial

Systems, a unit of United Technologies

Trademarks and

patents

The trade names used in this document may

be trademarks or registered trademarks of the

manufacturers or vendors of the respective

products.

Contact information

For contact information, see www.interlogix.com or

www.utcfssecurityproducts.eu.

Other manuals for TruVision TVD-2401

This manual suits for next models

Table of contents

Other Interlogix Security Camera manuals

Interlogix

Interlogix TruVision TVC-7120-1-N User manual

Interlogix

Interlogix TVB-5301 User manual

Interlogix

Interlogix UVP-N120P-36X(-P) User manual

Interlogix

Interlogix TruVision Line User manual

Interlogix

Interlogix TruVision Series User manual

Interlogix

Interlogix TVD-5110-3 User manual

Interlogix

Interlogix UltraView UVC-6130-1-N User manual

Interlogix

Interlogix TruVision Line Instruction sheet

Interlogix

Interlogix UVD-XP3DNR Assembly instructions

Interlogix

Interlogix TVW-1120 User manual

Interlogix

Interlogix TruVision Line User manual

Interlogix

Interlogix UltraView UVD-6130VE-2 Series User manual

Interlogix

Interlogix TruVision TVP-5101 Instruction sheet

Interlogix

Interlogix TruVision TVT-2103 User manual

Interlogix

Interlogix UltraView UVD-6130VE-2-P User manual

Interlogix

Interlogix TVF-1101 User manual

Interlogix

Interlogix FW5.1 User manual

Interlogix

Interlogix TruVision TVD-2404 User manual

Interlogix

Interlogix TruVision TVP-5201 Instruction sheet

Interlogix

Interlogix UltraView PTZ User manual

Interlogix

Interlogix TruVision TVB-2101 User manual

Interlogix

Interlogix UVD-XP4DNR(-P) User manual

Interlogix

Interlogix TruVision TVB-2401 User manual

Interlogix

Interlogix UltraSync RS-3240 User manual

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications