Interlogix TVW-1120 User manual

UltraConnect

Wi-Fi IP

Camera

Installation Guide

P/N 1073066-EN • REV A • ISS 17SEP15

Interlogix is part of UTC Building & Industrial Systems, a unit of United Technologies

Trademarks and patents

Trade names used in this document may be trademarks or registered trademarks of the

manufacturers or vendors of the respective products.

Manufacturer

Interogix

2955 Red Hill Avenue, Costa Mesa, CA 92626-5923, USA

Authorized EU manufacturing representative:

UTC Fire & Security B.V.

Kelvinstraat 7, 6003 DH Weert, The Netherlands

Certification

N4131

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

4. Consult the dealer or an experienced radio technician for help.

FCC Caution

To assure continued compliance, use only shielded interface cables when connecting to

computer or peripheral devices. Any changes or modifications not expressly approved by

the party responsible for compliance could void the user’s authority to operate the

equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful interference

(2) This Device must accept any interference received, including interference that may

cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Federal Communication Commission (FCC) Radiation Exposure Statement

This equipment complies with FCC radiation exposure set forth for an uncontrolled

environment. In order to avoid the possibility of exceeding the FCC radio frequency

exposure limits, human proximity to the antenna shall not be less than 20 cm (8 inches)

during normal operation.

R&TTE Compliance Statement

This equipment complies with all the requirements of DIRECTIVE 1999/5/CE OF THE

EUROPEAN PARLIAMENT AND THE COUNCIL OF 9 March 1999 on radio equipment

and telecommunication terminal Equipment and the mutual recognition of their conformity

(R&TTE). The R&TTE Directive repeals and replaces in the directive 98/13/EEC

(Telecommunications Terminal Equipment and Satellite Earth Station Equipment) as of

April 8, 2000.

Safety

This equipment is designed with the utmost care for the safety of those who install and use

it. However, special attention must be paid to the dangers of electric shock and static

electricity when working with electrical equipment. All guidelines of this and of the

computer manufacture must therefore be allowed at all times to ensure the safe use of the

equipment.

National Restrictions

This device is intended for home and office use in all EU countries (and other countries

following the EU directive 1999/5/EC) without any limitation except for the countries

mentioned below:

Country Restriction Reasons/remarks

Bulgaria

None

General authorization required for outdoor use

and public service

France

Outdoor use;

limited to 10 mW

e.i.r.p. within the

band 2454-2483.5

MHz.

Military Radiolocation use. Refarming of the

2.4 GHz band has been ongoing in recent

years to allow current relaxed regulation. Full

implementation planned 2012

Luxembourg

None

General authorization required for network

and service supply(not for spectrum).

Annex 3 B and A Wideband Data Transmission systems 2400.0-2483.5 MHz:

Country Restriction Reasons/remarks

Norway

Implemented

This subsection does not apply for the

geographical area within a radius of 20 km

from the centre of Ny-Ålesund.

Italy

Implemented

The public use is subject to general

authorization by the respective service

provider.

Russian

Federation

Limited

implementation

1. SRD with FHSS modulation

1.1. Maximum 2.5 mW e.i.r.p.

1.2. Maximum 100 mW e.i.r.p. Permitted for

use SRD for outdoor applications without

restriction on installation height only for

purposes of gathering telemetry information

for automated monitoring and resources

accounting systems. Permitted to use SRD for

other purposes for outdoor applications only

when the installation height is not exceeding

10 m above the ground surface. 1.3 maximum

100 mW e.i.r.p. indoor applications.

2. SRD with DSSS and other than FHSS

wideband modulation

2.1. Maximum mean e.i.r.p. density is

2 mW/MHz. Maximum 100 mW e.i.r.p.

2.2. Maximum mean e.i.r.p. density is

20 mW/MHz. Maximum 100 mW e.i.r.p. It is

permitted to use SRD for outdoor applications

only for purposes of gathering telemetry

information for automated monitoring and

resources accounting systems or security

systems.

2.3. Maximum mean e.i.r.p. density is

10 mW/MHz. Maximum 100 mW e.i.r.p. indoor

applications.

Ukraine

Limited

implementation

e.i.r.p. ≤100 mW with built-in antenna with

amplification factor up to 6 dBi.

The following information shall also be included in the case of radio equipment

intentionally emitting radio waves:

(a) frequency band(s) in which the radio equipment operates;

(b) maximum radio-frequency power transmitted in the frequency band(s) in which the

radio equipment operates.

2012/19/EU (WEEE directive): Products marked with this symbol

cannot be disposed of as unsorted municipal waste in the

European Union. For proper recycling, return this product to your

local supplier upon the purchase of equivalent new equipment, or

dispose of it at designated collection points. For more information

see: www.recyclethis.info.

2006/66/EC (battery directive): This product contains a battery

that cannot be disposed of as unsorted municipal waste in the

European Union. See the product documentation for specific

battery information. The battery is marked with this symbol, which

may include lettering to indicate cadmium (Cd), lead (Pb), or

mercury (Hg). For proper recycling, return the battery to your

supplier or to a designated collection point. For more information

see: www.recyclethis.info.

Contact

information

For contact information, see www.interlogix.com or

www.utcfssecurityproducts.eu.

6 Installation Guide

Content

Introduction 7

Product overview 7

Installation 7

Installation environment 7

Package contents 9

Cable requirements 11

Camera description 12

Camera dimensions 13

Accessing the SD card 14

Mounting the wedge camera 14

Setting up Ethernet/Wi-Fi transmission 17

Add the camera to UltraConnect 23

View live stream and the latest video clips 24

Program event-triggered camera video clips 25

View event-triggered video clips in History 28

Remove a camera from UltraConnect (if required) 28

Reset the camera to factory default 29

Specifications 29

Installation Guide 7

Introduction

Product overview

This is the installation guide for TruVision Intrusion 1120 Series

Wi-Fi IP camera models:

TVW-1120 (TruVision Intrusion 1.3 MPx, PAL, Wi-Fi,

Outdoor IR Wedge Dome, True D/N, H.264, 10 m IR,

2.8 mm @ F1.2, PoE / 12 VDC)

TVW-1121 (TruVision Intrusion 3 MPx, PAL, Wi-Fi,

Outdoor IR Wedge Dome, True D/N, H.264, 10 m IR,

2.8 mm @ F1.2, PoE / 12 VDC)

Installation

This section provides information on how to install the cameras.

Installation environment

When installing your product, consider these factors:

•Electrical: Install electrical wiring carefully. It should be

done by qualified service personnel. Always use a proper

PoE switch or a 12 VDC UL listed Class 2 or CE certified

power supply to power the camera. Do not overload the

power cord or adapter.

•Ventilation: Ensure that the location planned for the

installation of the camera is well ventilated.

•Temperature: Do not operate the camera beyond the

specified temperature, humidity or power source ratings.

The operating temperature of the camera is between -30

to +60°C (-22 to 140°F). Humidity is below 90%.

8Installation Guide

•Moisture: Do not expose the camera to rain or moisture,

or try to operate it in wet areas. Turn the power off

immediately if the camera is wet and ask a qualified

service person for servicing. Moisture can damage the

camera and also create the danger of electric shock.

•Servicing: Do not attempt to service this camera yourself.

Any attempt to dismantle or remove the covers from this

product will invalidate the warranty and may also result in

serious injury. Refer all servicing to qualified service

personnel.

•Cleaning: Do not touch the sensor modules with fingers. If

cleaning is necessary, use a clean cloth with some ethanol

and wipe the camera gently. If the camera will not be used

for an extended period of time, put on the lens cap to

protect the sensors from dirt.

Installation Guide 9

Package contents

Check the package and contents for visible damage. If any

components are damaged or missing, do not attempt to use the

unit; contact the supplier immediately. If the unit is returned, it

must be shipped back in its original packaging.

IP wedge camera

Installation manual

Converter pan

Configuration CD

Anchors and screws

Mounting templates

Water joint: Ethernet

Lens alignment tool

10 Installation Guide

Hex wrench

12 VDC connector

Screws C: M4×8, 2pcs

WEEE and battery disposal

Power supply with

European plug

Power supply with UK plug

Power supply with

Australian plug

SD card

This manual suits for next models

Table of contents

Other Interlogix Security Camera manuals

Interlogix

Interlogix TruVision Line User manual

Interlogix

Interlogix TruVision TVD-7120VE-2 User manual

Interlogix

Interlogix TruVision IP Dome User manual

Interlogix

Interlogix UVD-XP4DNR(-P) User manual

Interlogix

Interlogix True Vision TVP-5104 User manual

Interlogix

Interlogix TruVision Line User manual

Interlogix

Interlogix TruVision TVD-2402 User manual

Interlogix

Interlogix TruVision TVT-2101 User manual

Interlogix

Interlogix UVP-N120P-36X(-P) User manual

Interlogix

Interlogix UVC-XP4DN-HR-P User manual

Interlogix

Interlogix UVD-XP3DNR Assembly instructions

Interlogix

Interlogix TVD-5110-3 User manual

Interlogix

Interlogix TruVision TVP-5101 Instruction sheet

Interlogix

Interlogix TVD-6120VE-2-N User manual

Interlogix

Interlogix TruVision TVB-2402 User manual

Interlogix

Interlogix TruVision TVC-7120-1-N User manual

Interlogix

Interlogix TruVision TVB-2403 Instruction sheet

Interlogix

Interlogix TruVision TVP-5201 Instruction sheet

Interlogix

Interlogix 36X User manual

Interlogix

Interlogix TVB-5301 User manual

Interlogix

Interlogix UltraView IP PTZ 36X User manual

Interlogix

Interlogix UltraSync RS-3240 User manual

Interlogix

Interlogix TVB-5801 Instruction sheet

Interlogix

Interlogix TVF-1101 User manual

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications