Interlogix TruVision Line Instruction sheet

TruVision Panoramic Wi-Fi

Wedge IP Camera

Configuration

Manual

P/N 1073032-EN • REV A • ISS 29SEP15

2015 United Technologies Corporation.

Interlogix is part of UTC

Building & Industrial Systems, a unit of

United Technologies Corporation.

Trademarks and

patents

rade names used in this document may be trademarks or

registered trademarks of the manufacturers or vendors of the

respective products.

Manufacturer

Interlogix

2955 Red Hill Avenue, Costa Mesa, CA 92626

-5923, USA

Authorized EU manufacturing representative:

UTC

Fire & Security B.V.

Kelvinstraat 7, 6003 DH Weert, The Netherlands

Certification

N4131

FCC compliance

Class

B: This equipment has been tested and found to comply with

the limits for a Class

B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated i

n a

commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment

a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his own

expense.

ACMA compliance

Notice!

This is a Class B product. In a domestic environment this

product may cause rad

io interference in which case the user may be

required to take adequate measures.

European Union

directives

2004/108/EC (EMC directive)

: Hereby, UTC Climate Controls &

Security

declares that this device is in compliance or with the

essential requirement

s and other relevant provisions of Directive

2004/108/EC

2006/66/EC (battery directive)

: Products marked with this symbol

cannot be disposed of as unsorted municipal waste in the European

Union. For proper recycling, return this product to your local

supplier

upon the purchase of equivalent new equipment, or dispose of it at

designated collection points. For more information see:

www.recyclethis.info.

Contact information

For contact information

, see www.utcfireandsecurity.com or

www.utcfssecuritypro

ducts.eu.

TruVision Panoramic Wi-Fi Wedge IP Camera Configuration Manual 1

Content

Introduction 3

Network access 4

Checking your web browser security level 4

Accessing the camera over the network 6

Overview of the camera web browser 6

Camera configuration 8

Configuration menu overview 8

Local configuration 9

System time 10

Network settings 12

Recording parameters 24

Video image 27

OSD (On Screen Display) 29

Overlay text 30

Privacy masks 31

Motion detection alarms 31

Tamper-proof alarms 35

Exception alarms 36

Alarm inputs and outputs 37

Cross line detection 38

Intrusion Detection 40

Snapshot parameters 41

NAS settings 43

Storage devices 44

Recording schedule 45

Camera management 48

User management 48

Authentication 50

IP address filter 51

Restore default settings 52

Import/export a configuration file 53

Upgrade firmware 54

Reboot camera 54

Camera operation 55

Logging on and off 55

Live view mode 55

Playing back recorded video 56

Searching event logs 58

2 TruVision Panoramic Wi-Fi Wedge IP Camera Configuration Manual

Index 61

TruVision Panoramic Wi-Fi Wedge IP Camera Configuration Manual 3

Introduction

This is the configuration manual for TruVision Panoramic Wedge IP camera

models:

IP Wi-Fi panoramic wedge camera:

TVW-1130 (3MPX Panoramic, 1.6 mm lens, Gray, Wi-Fi, PAL)

TVW-3130 (3MPX Panoramic, 1.6 mm lens, Gray, Wi-Fi, NTSC)

Note: The camera has a horizontal viewing angle range between 127 and 160

degrees, depending on the resolution ratio settings.

4 TruVision Panoramic Wi-Fi Wedge IP Camera Configuration Manual

Network access

This manual explains how to configure the camera over the network with a web

browser.

TruVision IP cameras can be configured and controlled using Microsoft Internet

Explorer (IE) and other browsers. The procedures described use Microsoft

Internet Explorer (IE) web browser.

Checking your web browser security level

When using the web browser interface, you can install ActiveX controls to

connect and view video using Internet Explorer. However, you cannot download

data, such as video and images due to the increased security measure.

Consequently you should check the security level of your PC so that you are able

to interact with the cameras over the web and, if necessary, modify the Active X

settings.

Configuring IE ActiveX controls

You should confirm the ActiveX settings of your web browser.

To change the web browser’s security level:

1. In Internet Explorer click Internet Options on the Tools menu.

2. On the Security tab, click the zone to which you want to assign a web site

under “Select a web content zone to specify its security settings”.

3. Click Custom Level.

4. Change the ActiveX controls and plug-ins options that are signed or

marked as safe to Enable. Change the ActiveX controls and plug-ins

options that are unsigned to Prompt or Disable. Click OK.

TruVision Panoramic Wi-Fi Wedge IP Camera Configuration Manual 5

- Or -

Under Reset Custom Settings, click the security level for the whole zone in

the Reset To box, and select Medium. Click Reset.

Then click OK to the Internet Options Security tab window.

5. Click Apply in the Internet Options Security tab window.

Windows 7 and 8 users

Internet Explorer for Windows 7 and Windows 8 operating systems have

increased security measures to protect your PC from any malicious software

being installed.

To have complete functionality of the web browser interface with Windows 7 and

Windows 8, do the following:

• Run the Browser interface as an administrator in your workstation

• Add the camera’s IP address to your browser’s list of trusted sites

To add the camera’s IP address to Internet Explorer’s list of trusted sites:

1. Open Internet Explorer.

2. Click Tools, and then Internet Options.

3. Click the Security tab, and then select the Trusted sites icon.

4. Click the Sites button.

5. Clear the “Require server verification (https:) for all sites in this zone box.

6. Enter the IP address in the “Add this website to the zone” field.

7. Click Add, and then click Close.

8. Click OK in the Internet Options dialog window.

9. Connect to the camera for full browser functionality.

6 TruVision Panoramic Wi-Fi Wedge IP Camera Configuration Manual

Accessing the camera over the network

Use the web browser to access and configure the camera over the network.

It is recommended that you change the administrator password once the setup is

complete. Only authorized users should be able to modify camera settings. See

“User management” on page 48 for further information.

To access the camera online:

1. In the web browser enter the camera’s IP address (default is 192.168.1.70).

Use the tool, TruVision Device Manager, enclosed on the CD to find the IP

address of the camera.

The Login dialog box appears.

Note: Ensure that the Active X controls are enabled.

2. Enter your user name and password.

User name: admin

Password: 1234

3. Click Login. The web browser window appears in live view mode.

Overview of the camera web browser

The camera web browser lets you view, record, and play back recorded videos

as well as manage the camera from any PC with Internet access. The browser’s

easy-to-use controls give you quick access to all camera functions. See Figure 1

on page 7.

If there is more than one camera connected over the network, open a separate

web browser window for each individual camera.

TruVision Panoramic Wi-Fi Wedge IP Camera Configuration Manual 7

Figure 1: Web browser interface

Table 1: Description of the web browser interface

Name

Description

1. Live view Click to view live video.

2. Playback Click to play back video.

3. Log Click to search for event logs. There are three main types: Alarm,

Exception and Operation.

4. Configuration Click to display the configuration window for setting up the

camera.

5. Viewer View live video. Time, date and camera name are displayed

here.

6. Current user Displays current user logged on.

7. Logout Click to log out from the system. This can be done at any time.

8. Aspect ratio Select the aspect

9. Streaming Switch between main stream and substream.

10. Start/stop live view Click to start/stop live view.

11. Audio Adjust volume.

12.

Bidirectional audio Turn on/off the microphone.

13. Capture Click to take a snapshot of the video. The snapshot will be saved

to the default folder in JPEG format.

14. Start/stop recording Click to record live video.

8 TruVision Panoramic Wi-Fi Wedge IP Camera Configuration Manual

Camera configuration

This chapter explains how to configure the cameras through a web browser.

Once the camera hardware has been installed, configure the camera’s settings

through the web browser. You must have administrator rights in order to

configure the cameras over the internet.

The camera web browser lets you configure the camera remotely using your PC.

Web browser options may vary depending on camera model.

There are two main folders in the configuration panel:

Local configuration

Configuration

Configuration menu overview

Use the Configuration panel to configure the network, camera, alarms, users,

transactions and other parameters such as upgrading the firmware. See Figure 2

below for descriptions of the configuration folders available.

Figure 2: Configuration panel (Device Information tab selected)

Table 2: Description of the Configuration parameters

Configuration folders Description

System

Defines device basic information including

SN and the current firmware

version, time settings, maintenance, and serial port parameters. See

“System time” on page 10, “Restore default settings” on page 52, and

“Upgrade firmware” on page 54 for more information.

Network

Defines the network parameters required to access the camera over

the internet. See “Network settings” on page 12 for more information.

Other manuals for TruVision Line

Table of contents

Other Interlogix IP Camera manuals

Interlogix

Interlogix UVD-IP-XP4DNR-VA2 User manual

Interlogix

Interlogix TruVision TVA-1101 Instruction sheet

Interlogix

Interlogix TruVision 11 Series User manual

Interlogix

Interlogix UltraSync RS-3230 Instruction sheet

Interlogix

Interlogix TVB-1101 User manual

Interlogix

Interlogix TruVision 12 Series User manual

Interlogix

Interlogix TVB-1101 Instruction sheet

Interlogix

Interlogix UltraView IP XP4 Box Day/Night Range Camera User manual

Interlogix

Interlogix TruVisioin 12 Series User manual

Interlogix

Interlogix TruVision 11/31 Series User manual

Interlogix

Interlogix TruVision TVT-2202 User manual

Interlogix

Interlogix UltraSync RS-3230 User manual

Interlogix

Interlogix TruVision Line User manual

Interlogix

Interlogix FW5.1 User manual

Interlogix

Interlogix TruVision Series TVQ-8101 User manual

Interlogix

Interlogix TruVision Line User manual

Interlogix

Interlogix TruVision Line User manual

Interlogix

Interlogix TruVision TVP-1101 Instruction sheet

Interlogix

Interlogix TruVision 6 Series User manual

Interlogix

Interlogix TruVision Open Standards How to use

Interlogix

Interlogix UltraSync RS3130 User manual

Interlogix

Interlogix 1073033-EN User manual

Interlogix

Interlogix TVC-5125BE-3 User manual

Interlogix

Interlogix TruVision TVF-5201 Instruction sheet

Popular IP Camera manuals by other brands

FLIR

FLIR Exx series user manual

Avigilon

Avigilon H4A-BO1-IR installation guide

Digital Watchdog

Digital Watchdog DWCA-C128-64 manual

ShareTech

ShareTech AV1 user manual

Ezviz

Ezviz C6C quick start guide

Melchioni

Melchioni UCAM 2015 manual

Geutebruck

Geutebruck G-Cam/ESD-4630 quick guide

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG installation manual

Mitel

Mitel 6800i Series Administrator's guide

Vitek

Vitek VTC-IR403-212NP quick start guide

THOMSON

THOMSON DSC - 323W user guide

AVer

AVer FB2027 user manual

ENFORCER

ENFORCER EV-T5105-N2SQ manual

Wansview

Wansview NC543 user manual

Eneo

Eneo MCB-64A0003M0A Quick installation guide

deView electronics

deView electronics CBDNI36F instruction manual

Swann

Swann SwannEye user manual

LevelOne

LevelOne IP CamSecure user manual