Insportline ProfiStair User manual

USER MANUAL –EN

IN 16385 Stepmill inSPORTline ProfiStair

2 
 
CONTENTS 
OVERVIEW DRAWING........................................................................................................................... 3 
SAFETY PRECAUTIONS........................................................................................................................ 3 
POWER INPUT REQUIREMENTS......................................................................................................... 5 
LEVELLING............................................................................................................................................. 5 
POWER SWITCH.................................................................................................................................... 6 
SAFETY KEY........................................................................................................................................... 6 
PARTS LIST............................................................................................................................................ 6 
HARDWARE LIST................................................................................................................................... 8 
ASSEMBLY STEPS ................................................................................................................................ 9 
CONSOLE OPERATION INSTRUCTIONS........................................................................................... 15 
HEART RATE EXERCISING................................................................................................................. 16 
HEART RATE MONITORING SYSTEM ............................................................................................... 17 
HAND PULSE SENSOR.................................................................................................................... 17 
CHEST STRAP.................................................................................................................................. 17 
EXERCISE PROGRAMS ...................................................................................................................... 18 
QUICK START................................................................................................................................... 18 
GOAL................................................................................................................................................. 18 
PROGRAMS.......................................................................................................................................... 20 
MANUAL............................................................................................................................................ 20 
RANDOM........................................................................................................................................... 20 
HILL.................................................................................................................................................... 20 
SPEED INTERVAL ............................................................................................................................ 21 
FAT BURN......................................................................................................................................... 22 
CARDIO............................................................................................................................................. 22 
TRAINING.......................................................................................................................................... 22 
STEPMILL PROGRAM OPERATION DIAGRAM ................................................................................. 22 
TROUBLE SHOOTING ......................................................................................................................... 23 
SWITCHING BETWEEN METRIC AND IMPERIAL UNITS.................................................................. 24 
TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS................................................. 25 
 
 

OVERVIEW DRAWING

SAFETY PRECAUTIONS

•Read this manual carefully before first use and retain it for future reference.

•Use the product only according to this manual and for its intended purpose. Do not modify the

product in any way.

•WARNING! Before maintenance, always unplug the device from electrical outlet to prevent

burning or electrocuting yourself.

•While the product is turned on, pay attention to its operating status to avoid an injury. If the

machine is idle, it is recommended to turn off the power and unplug the power cord.

•Keep the stepmill away from children and pets. Never leave them unattended near the device.

•Never use the product if parts of it are worn or damaged. Regularly check all the screws, nuts

and other connecting parts to make sure they are not loose. Damaged or worn parts should be

replaced immediately.

•Never use the stepmill if the plug or power cord are damaged. If the power cord doesn’t work

properly or if it has been exposed to water, stop using it at once and have it repaired or

replaced by a qualified technician or the customer service.

•Never use the power cord or other cables to move the device.

•Make sure the power cord never comes into contact with a heated surface. Keep it in a

sufficient distance from heated surfaces or objects.

•If the ventilation ducts are clogged with hair or dust, make sure you clean them before

operating the stepmill.

•Never insert anything into the open spaces found on the device.

•This product cannot be used outdoors.

•Do not use the product in a room without proper ventilation or with low levels of oxygen.

•Always unplug the power cord after shutting the stepmill off.

•Make sure the device is plugged into a properly grounded socket.

•This product is not intended for people with physical or mental disabilities and unexperienced

users (including children), unless they are under qualified supervision.

•Exercise according to the given instructions. Improper exercising may result in an injury. Make

sure not to exceed your limits.

•For the assembly, prepare a wide area with a flat and clean surface.

•The stepmill can only be placed on a flat, clean and solid surface. Keep a safety clearance of

2 x 1 m behind the device and at least 0.6 m around the rest.

•You should provide regular maintenance and check the stepmill for damage.

•No adjustable part should protrude and limit the user’s movements.

•If the first stair is too high for you, use the foot supports to get on.

•Always hold on to the handlebars while getting on/off the device.

•Wear appropriate sports clothes and shoes. Avoid loose clothes so they don’t get stuck in the

moving parts of the stepmill.

•Make sure you attach the safety clip to your clothes. Step onto the second stair while holding

on to the handle bars and use this as a standby position. Don’t start exercising before you

stand on the stair.

•Always hold the handlebar as a support.

•Press the STOP key to finish exercising and wait until the stairs stop completely. Only then

step off the stepmill.

•Step area: 526 x 250 mm

•Weight limit: 180 kg

•It meets the standards: EN957-1, EN957-8

•Category: S(according to EN957 standard) suitable for commercial use

•WARNING! The heart rate frequency monitoring may not be completely accurate.

Overexertion during training can lead to a serious injury or even death. If you start to feel faint,

stop the exercise immediately.

POWER INPUT REQUIREMENTS

This product requires 220-240 V power and a well-grounded socket, as shown in the picture below.

Make sure the power socket was installed by a qualified technician.

Cables should be transported according to the corresponding laws of your country. High pressure

cables, low pressure cables und underground cables should be transported separately and cannot be

connected or tangled with other cables.

Improper power cord connection can result in the risk of an electric shock. Check with a qualified

electrician or serviceman if you have any doubts that the product is properly grounded. Never modify

the provided power cord. If it does not fit the outlet, have a proper one installed by a professional

electrician.

LEVELLING

If the surface is not even and not all the support legs are fixed, the stepmill will wobble when you start

to use it. This can cause vibrations or make the device lean tilt.

How to level the stepmill:

1. Loosen the A nut by turning in counter-clockwise.

2. Adjust the foot pad B to the desirable height.

3. Lock the A nut tightly in a clockwise direction.

4. Use the same method to adjust all the foot pads.

POWER SWITCH

The power switch is located on the back of the stepmill (I=ON, O=OFF).

SAFETY KEY

The stepmill is equipped with an emergency stop system, including a safety key. Below are

instructions on how to use the safety key in case of an emergency.

•Pull the string.

•The safety key will be pulled out and the machine

will come to a halt. If you feel that the safety key

is stuck, stop pulling.

•Insert the key back.

•The stepmill will enter the standby mode again.

PARTS LIST

A) Main frame set

B) Console set

C) Console back cover

D) Accessory tray back cover

E) Accessory tray set

F) Support handlebar set

G) Front upright tube set

H) Rear upright tube set

I) Support handlebar covers

J) Rear upright tube covers

K) Foot supports

L) Waterproof covers

N) Underside cover of the accessory tray

HARDWARE LIST

STEP

ITEM

DESCRIPTION

QTY

STEP 1

K03

Hexagon socket head steel screw M10xP1.5x70

K04

Flat washer ø10xø20x1.5t

STEP 2

K03

Hexagon socket head steel screw M10xP1.5x70

K04

Flat washer ø10xø20x1.5t

STEP 3

K15

Umbrella head steel screw M8xP1.25x15 with nylon blue

K16

Flat washer ø8xø20x1.5t

STEP 4

K05

Hexagon socket head steel screw M8xP1.25x30

K08

Hexagon socket head steel screw M8xP1.25x45

K09

Camber washer ø8.5xø16x1.0t-R19

STEP 5

K10

Umbrella head steel screw M8xP1.25x20

K11

Console fix washer NT-3409

K12

Spring washer M8

K13

Umbrella head cross self-tapping screw ø4x16

K14

Umbrella head cross screw (thread cutting) M4xP0.7x15

K20

Umbrella head cross self-tapping screw ø4x20

STEP 6

K06

Umbrella head cross self-tapping screw (stainless) ø4x16

K07

Umbrella cross screw (stainless, black) M4xP0.7x15

STEP 7

(Tools)

K01

Hexagon socket head steel screw M10xP1.5x15

K02

Flat washer ø10xø30x1.5t

K21

Buckle end cap

K17

L-shaped Allen wrench + Cross driver 5x70x70 mm

K18

L-shaped Allen wrench 6x40x120 mm

K19

L-shaped Allen wrench 8x55x110 mm

ASSEMBLY STEPS

STEP 1 –Main frame and the front upright tube set

•First install the waterproof covers (L) onto both front upright tubes (G).

•Then pull the main cable out of the upright opening on the right side of the Main frame (A) and

pull the cable up through the right side Upright tube (G).

•Then attach the upright tube set (G) to the main frame set (A) using screws (K03) and flat

washers (K04).

•Do not tighten the screws too much yet.

STEP 2 –Main frame and the rear upright tube set

•Attach the rear upright tube set (H) to the main frame (A) using screws (K03) and flat washers

(K04).

•Do not tighten the screws too much yet.

STEP 3 –Accessory tray and the front upright tube set

•Attach the accessory tray set (E) to the front upright tube set (G) with screws (K15) and flat

washers (K16).

•Do not tighten the screws too much yet.

•Note:

1. After each successful cable wire connection, you should hear a click.

2. For better safety during the assembly, request the help of at least one other person.

Other manuals for ProfiStair

This manual suits for next models

Table of contents

Other Insportline Treadmill manuals

Insportline

Insportline IN 15036 User manual

Insportline

Insportline Gallop User manual

Insportline

Insportline IN 8252 User manual

Insportline

Insportline Gilavar User manual

Insportline

Insportline inCondiT30i User manual

Insportline

Insportline Air-run IN 19903 User manual

Insportline

Insportline IN 6938 Gilavar User manual

Insportline

Insportline IN 6937 Aluvis User manual

Insportline

Insportline inCondiT50i User manual

Insportline

Insportline Trodos IN 7564 User manual

Insportline

Insportline 9126 T60i User manual

Insportline

Insportline IN 24097 User manual

Insportline

Insportline IN 3880 User manual

Insportline

Insportline Cirrus IN 3879 User manual

Insportline

Insportline SANGAR IN 12999 User manual

Insportline

Insportline inCondi T70i II User manual

Insportline

Insportline Hill Pro User manual

Insportline

Insportline IN 3478 User manual

Insportline

Insportline Stratosphere User manual

Insportline

Insportline inCondi T45i User manual

Insportline

Insportline Zidaho QS8480C User manual

Insportline

Insportline Trodos QST8436 User manual

Insportline

Insportline inCondi T70i User manual

Insportline

Insportline AeroHike IN 19902 User manual

Popular Treadmill manuals by other brands

Treadly

Treadly TREADLY 2 user manual

HEALTH ONE

HEALTH ONE Walk Ro user manual

NordicTrack

NordicTrack NTL12941 user manual

NordicTrack

NordicTrack T7.5 S user manual

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 user manual

Merax

Merax MS282992 manual

FYTTER

FYTTER RU-2SX manual

Precor

Precor 903 owner's manual

FitLogic

FitLogic freewill d225 owner's manual

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB instruction manual

Horizon Fitness

Horizon Fitness Adventure 5 Plus Service manual

Stamia

Stamia InMotion II owner's manual

Smooth Fitness

Smooth Fitness EVO 3i user manual

NordicTrack

NordicTrack NETL81810.0 user manual

Schwinn

Schwinn 830/Journey 8.0 Assembly manual / owner's manual

Keys Fitness

Keys Fitness HealthTrainer HT-740T owner's manual

Spirit

Spirit XT8 Service manual

NordicTrack

NordicTrack T 14.0 Treadmill Manuel de l'utilisateur