FitLogic freewill d225 User manual
0
Read all the instructions carefully before
assembling and using this product. Retain this
owner’s manual for the future’s reference.
!
1
1. Plug the power cord of the treadmill directly into a dedicated grounded circuit. This
product must be grounded well. If it has breakdown, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock.
2. Position the treadmill on a clean and flat surface with at least 2m*1m area. Do not place
the treadmill on thick carpet as it may interfere with proper ventilation. Also, do not place
the treadmill near water or outdoors.
3. Position the treadmill where the wall plug is visible and accessible.
4. NEVER start the treadmill while you are standing on the walking belt. After turning the
power on and adjusting the speed control, there may be a pause before the walking belt
begins to move, ALWAYS stand on the foot rails on the sides of the frame until the belt is
moving.
5. Wear appropriate clothing when exercising on the treadmill. Do not wear long, loose
fitting clothing that could become caught in the treadmill. Always wear running or aerobic
shoes with rubber soles.
6. Always unplug the power cord before removing the treadmill motor cover.
7. Keep small children away from the treadmill during operation.
8. Always hold the handrails when initially walking or running on the treadmill, until you
are comfortable with the use of the treadmill.
9. Always attach the safety pull pin rope to your clothing when using the treadmill. If the
treadmill should suddenly increase in speed due to an electronics failure or the speed
being inadvertently increased, the treadmill will come to a sudden stop when the pull pin
is disengaged from the console.
IMPORTANT SAFETY PRECAUTIONS
2
10. When the treadmill is not being used, the power cord should be unplugged and the
safety pull pin should be removed.
11. Before starting any exercise program, consult with your physician or health
professional. He or she can help to establish the exercise frequency, intensity (target heart
zone) and time appropriate to your particular age and physical condition. If you have any
pain or tightness in your chest, an irregular heartbeat, shortness of breath, feel faint or
have any discomfort while you exercise, STOP IMMEDIATELY! Consult your physician
before continuing.
12. If you observe any damage or wear on the mains plug or on any section of the mains
lead then please have these replaced immediately by a qualified electrician –do not
attempt to change or repair these yourself.
13. If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
14. Put your feet on the side rail before using the treadmill, and always attach the safety
pull pin rope to your clothing. Hold the handle bar before the running belt moving well
( feel the running speed by your single foot before using it). To avoid loss balance, please
slow down the speed to the lowest or take off the safety. And hold the handle bar to jump
to the side rail when emergency or the safety key is not attached.
IMPORTANT SAFETY PRECAUTIONS
3
When you open the carton, you will find the below spare parts:
Spare parts list：
NO.
Name
Spec.
Quan.
NO.
Name
Spec.
Quan.
1
Main Frame
1
41
Bolt
M8*16
12
98
Left Handlebar Cover
1
60
Lock washer
8
22
99
Right Handlebar Cover
1
56
Screw
4.2*12
47
93
Left upright cover
1
14
5# Allen Wrench
5mm
1
94
Right upright cover
1
13
wrench w/screw
driver
S=13、14、15
1
75
Safety Key
1
Assembly tools:
5#ALLEN WRENCH 5mm 1pcs、
WRENCH W/SCREW DRIVER S=13、14、15 1pcs
ASSEMBLY INSTRUCTIONS
4
Notice: Do not turn power on before assembly is done.
STEP 1：
ASSEMBLY STEP TWO:
STEP 2：
STEP 3：
Use 5# allen wrench, lock the
Left upright (3) on the base
MAIN FRAME (1) with bolt (41)
and lock washer (60)
Attention: Hold the left
upright and right upright to
avoid dropping.
Open the carton ，take out the
spare parts ，and put the MAIN
FRAME on the ground.
ASSEMBLY STEPS
Turn the computer and the
upright frame up.
Attention: Don’t press the
wires inside the upright
frame when folding. Hold
the computer and upright
frame to avoid dropping.
5
STEP 4:
STEP 5:
STEP 6:
Use 5# allen wrench, lock the
Right upright (4) on the base
MAIN FRAME (1) with bolt (41)
and lock washer (60)
Attention: Hold the left
upright and right upright to
avoid dropping.
Use 5# Allen wrench, lock the
COMPUTER (64) onto R&L
upright (3,4) with bolt (41) and
lock washer(60)
Use screw driver (13) and the
screw 4.2*12(56), lock the Left
Handlebar Cover (98) and
Right Handlebar Cover (99)
onto the computer connecting
tube
6
STEP 7:
STEP 8:
Lock the Left upright cover (93)
onto Left upright with the screw
(56) by using the Allen wrench.
Lock the Right upright cover
(94) onto Right upright with
the screw (56) by using the
Allen wrench.
Attention!
Please do not put the power on until you make sure that all the steps
above are well finished and tighten all the bolts. And please read all
the instructions as follows when you operate the treadmill.
7
Pulling up:
Pulling down:
1. Hold the place A, and pull up
the main frame as shown of the
arrow till you hear the sound
from the cylinder (12).
2. Hold place A, and kick the
cylinder (15) on position “B”,
pull down the base frame until
it reaches handlebar (5), press
the running deck a little and
the running deck will slip down
slowly.
FOLDING INSTRUCTION
8
TECHNICAL PARAMETER
BUILT UP
SIZE(mm)
1640*780*1340mm
FOLDABLE
SIZE(mm)
760*780*1570mm
RUNNING
BOARD (mm)
1300*430mm
NET WEIGHT OF
THE UNIT
65KGS
MAX USER’S
WEIGHT
120KGS
INCLINE LEVELS
12%
SPEED RANGE
1.0-16KM/h
1LCD DISPLAY
SPEED, TIME, DISTANCE, CALORIES, PULSE, INCLINE
9
GROUND GUIDE
This product must be grounded. If it should malfunction or breakdown, grounding
provides a path of least resistance for electric current to reduce the risk of electric
shock. This product is equipped with a cord having an equipment-grounding
conductor and a grounding plug. The plug must be plugged into an appropriate
outlet that is properly installed and grounded in accordance with all local codes
and ordinances.
DANGER –Improper connection of the equipment-grounding conductor can
result in a risk of electric shock. Check with a qualified electrician or serviceman
if you are in doubt as to whether the product is properly grounded. Do not modify
the plug provided with the product –if it will not fit the outlet, have a proper
outlet installed by a qualified electrician. This product is for use on a nominal
120-volt circuit and has a grounding plug that looks like the plug illustrated in
sketch A in following figure. Make that the product is connected to an outlet
having the same configuration as the plug. No adapter should be used with this
product.
Table of contents
Languages:
Other FitLogic Treadmill manuals
