3EN
Safety Instructions
Please follow the instructions below to avoid mishandling, damage to the
device, or personal injury:
Beware that the interface works with electrical power. Only use the
device in dry environments (indoor use). The IP Rating of the device
is IP20. Do not use the interface in humid environments and avoid
contact with water or any other liquids. Turn off the power if you are not using
the device for a long time. Avoid unwanted voltage on the cables at all times. Do
not remove any parts from the unit or connect to an ungrounded circuit. Do not
connect the unit to LEDs that are switched on. Only connect the unit to lighting
fixtures and controllers that areinitially powered off.There are no user-reparable
parts inside or outside the interface. Repair service lies only within the
responsibilities of the manufacturer. If the interface appears to be defective,
please contact your dealer. After expiration of the warranty period, you may
contact your supplier or the manufacturer to have the unit repaired against
payment of an individual service fee if possible. The interface has several ports
and slots. Only connect or insert devices, cables, and connectors to the individual
ports and slots using connectors of the same type as the port. Do not use
inapplicable equipment. This device should be used by professionals. The device
is not designed to be operated by non-professionals or children.
Recommendation: DIN-Rail Power Supply 12 V (MEAN WELL HDR-15-12,
DC Output, 12 V, 1.25 A, 15 W, 1 SU, DIN Rail) / Order Number: IA-HW-001027
or DIN-Rail Power Supply 24 V (MEAN WELL HDR-15-24, DC Output, 24 V,
0.63 A, 15.2 W, 1 SU, DIN Rail) / Order Number: IA-HW-001031.
THE DEVICE WORKS WITH LOW VOLTAGE (DC 5 V – 24 V).
DO NOT USE ANY OTHER VOLTAGE!
External USB power supplies: Using non-permissable units
poses risk of fire. 5.5 V⎓500 mA max. output is allowed.
Any connected external power supply needs to be fused
according to its output and/or short-circuit proof.
In order to cut off the supply of power completely, you need to
disconnect any external power-supply unit as well as USB.
