HIK VISION DS-2CD4025FWD-A User manual

Network Box Camera

Quick Start Guide

UD04345B

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

Network Box Camera·Quick Start Guide

Quick Start Guide

Any and all information, including, among others, wordings, pictures,

graphs are the properties of Hangzhou Hikvision Digital Technology

Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”).

This user manual (hereinafter referred to be “the Manual”) cannot

be reproduced, changed, translated, or distributed, partially or

wholly, by any means, without the prior written permission of

Hikvision. Unless otherwise stipulated, Hikvision does not make any

warranties, guarantees or representations, express or implied,

regarding to the Manual.

About this Manual

This Manual is applicable to 40xx/60xx Network Camera.

The Manual includes instructions for using and managing the

product. Pictures, charts, images and all other information

hereinafter are for description and explanation only. The

information contained in the Manual is subject to change, without

notice, due to firmware updates or other reasons. Please find the

latest version in the company website

(http://overseas.hikvision.com/en/).

Please use this user manual under the guidance of professionals.

Trademarks Acknowledgement

and other Hikvision’s trademarks and logos are the

properties of Hikvision in various jurisdictions. Other trademarks and

logos mentioned below are the properties of their respective

owners.

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

Network Box Camera·Quick Start Guide

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE

PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND

FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS,

AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,

SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND

NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL

HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE

LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR

INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR

LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF

DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF

THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF

PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL

NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION,

PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER

ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET

SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY

TECHNICAL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL

RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS

PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE

APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT

THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

Network Box Camera·Quick Start Guide

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE

APPLICABLE LAW, THE LATER PREVAILS.

Regulatory Information

FCC Information

FCC compliance: This equipment has been tested and found to

comply with the limits for a digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his own

expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied

accessories too are marked with "CE" and comply

therefore with the applicable harmonized European

standards listed under the EMC Directive 2014/30/EU, the RoHS

Directive 2011/65/EU.

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

Network Box Camera·Quick Start Guide

2012/19/EU (WEEE directive): Products marked

with this symbol cannot be disposed of as unsorted

municipal waste in the European Union. For proper

recycling, return this product to your local supplier

upon the purchase of equivalent new equipment, or dispose of it at

designated collection points. For more information see:

www.recyclethis.info

2006/66/EC (battery directive): This product

contains a battery that cannot be disposed of as

unsorted municipal waste in the European Union.

See the product documentation for specific battery

information. The battery is marked with this symbol,

which may include lettering to indicate cadmium (Cd), lead (Pb), or

mercury (Hg). For proper recycling, return the battery to your

supplier or to a designated collection point. For more information

see: www.recyclethis.info

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A) standards

requirements.

Safety Instruction

These instructions are intended to ensure that user can use the

product correctly to avoid danger or property loss.

The precaution measure is divided into “Warnings” and “Cautions”

Warnings: Serious injury or death may occur if any of the warnings

are neglected.

Cautions: Injury or equipment damage may occur if any of the

cautions are neglected.

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

Network Box Camera·Quick Start Guide

Warnings Follow these

Cautions Follow these

safeguards to prevent

precautions to prevent

serious injury or death.

potential injury or material

damage.

Warnings

● Proper configuration of all passwords and other security

settings is the responsibility of the installer and/or end-user.

● In the use of the product, you must be in strict compliance with

the electrical safety regulations of the nation and region. Please

refer to technical specifications for detailed information.

● Input voltage should meet both the SELV (Safety Extra Low

Voltage) and the Limited Power Source with 24 VAC or 12 VDC

according to the IEC60950-1 standard. Please refer to technical

specifications for detailed information.

● Do not connect several devices to one power adapter as

adapter overload may cause over-heating or a fire hazard.

● Please make sure that the plug is firmly connected to the power

socket. When the product is mounted on wall or ceiling, the

device shall be firmly fixed.

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

Network Box Camera·Quick Start Guide

● If smoke, odor or noise rise from the device, turn off the power

at once and unplug the power cable, and then please contact

the service center.

Cautions

● Make sure the power supply voltage is correct before using the

camera.

● Do not drop the camera or subject it to physical shock.

● Do not touch sensor modules with fingers. If cleaning is

necessary, use clean cloth with a bit of ethanol and wipe it

gently. If the camera will not be used for an extended period,

please replace the lens cap to protect the sensor from dirt.

● Do not aim the camera at the sun or extra bright places.

Blooming or smearing may occur otherwise (which is not a

malfunction), and affect the endurance of sensor at the same

time.

● The sensor may be burned out by a laser beam, so when any

laser equipment is in using, make sure that the surface of

sensor will not be exposed to the laser beam.

● Do not place the camera in extremely hot, cold (the operating

temperature shall be-30°C ~+60°C , or -40°C ~ +60°C if the

camera model has an “H” in its suffix), dusty or damp locations,

and do not expose it to high electromagnetic radiation.

● To avoid heat accumulation, good ventilation is required for

operating environment.

● Keep the camera away from liquid while in use.

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

Network Box Camera·Quick Start Guide

● While in delivery, the camera shall be packed in its original

packing, or packing of the same texture.

● Regular part replacement: a few parts (e.g. electrolytic

capacitor) of the equipment shall be replaced regularly

according to their average enduring time. The average time

varies because of differences between operating environment

and using history, so regular checking is recommended for all

the users. Please contact with your dealer for more details.

● Improper use or replacement of the battery may result in

hazard of explosion. Replace with the same or equivalent type

only. Dispose of used batteries according to the instructions

provided by the battery manufacturer.

● If the product does not work properly, please contact your

dealer or the nearest service center. Never attempt to

disassemble the camera yourself. (We shall not assume any

responsibility for problems caused by unauthorized repair or

maintenance.)

0504051070109

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

Network Box Camera·Quick Start Guide

Table of Contents

1 Appearance Description ................................................................. 9

2 Installation.................................................................................... 13

2.1 Ceiling Mounting........................................................... 14

2.2 Wall Mounting .............................................................. 16

2.3 Installing the SD Card .................................................... 20

3 Setting the Network Camera over the LAN .................................. 21

3.1 Wiring ........................................................................... 21

3.2 Activating the Camera................................................... 22

3.2.1 Activation via Web Browser................................ 22

3.2.2 Activation via SADP Software ............................. 23

3.3 Modifying the IP Address .............................................. 25

4 Accessing via Web Browser .......................................................... 28

5 Operating via Hik-Connect App .................................................... 30

5.1 Enable Hik-Connect Service on Camera......................... 30

5.1.1 Enable Hik-Connect Service via SADP Software .. 30

5.1.2 Enable Hik-Connect Service via Web Browser .... 31

5.2 Hik-Connect Setup ........................................................ 33

5.3 Adding Camera to Hik-Connect ..................................... 33

5.4 Initializing the Memory Card ......................................... 35

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

Network Box Camera·Quick Start Guide

1 Appearance Description

The overview of the box camera is shown below:

Figure 1-1 Overview (1)

The overview of the components and the interface are shown below:

Figure 1-2 Overview (2)

The interfaces on the rear panel are shown below:

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

Table of contents

Other HIK VISION IP Camera manuals

HIK VISION

HIK VISION DS-2CD802PF(NF)(-E)(-W) User manual

HIK VISION

HIK VISION DS-2CD762MF-FBH Series User manual

HIK VISION

HIK VISION DS-2DE7530IW-AE User manual

HIK VISION

HIK VISION DS-2CD728PF-PT(W) User manual

HIK VISION

HIK VISION DS-2CD852F Series User manual

HIK VISION

HIK VISION DS-2TD6267-75C4L/W User manual

HIK VISION

HIK VISION DS-2CD2612F-I(S) User manual

HIK VISION

HIK VISION DS-22CE12DFT-PIRXOF User manual

HIK VISION

HIK VISION DS-2CD21 Series User manual

HIK VISION

HIK VISION DS-2CD802P(N)-IR1(IR3) User manual

HIK VISION

HIK VISION DS-2CE71D8T-PIRL User manual

HIK VISION

HIK VISION DS-2CD792PF(NF)(-E) User manual

HIK VISION

HIK VISION ivideon User manual

HIK VISION

HIK VISION DS-2CD2120F-I User manual

HIK VISION

HIK VISION DS-2CD732F-EPT User manual

HIK VISION

HIK VISION DS-2TD2636B-10/P User manual

HIK VISION

HIK VISION TURBO HD Full Time Color Series User manual

HIK VISION

HIK VISION DS-2CC502P-IR User manual

HIK VISION

HIK VISION DS-2TD2637B-10/P User manual

HIK VISION

HIK VISION DS-2CD727PF-PT(W) User manual

HIK VISION

HIK VISION DS-2CE56D1T-IRM User manual

HIK VISION

HIK VISION DS-2CD2942F User manual

HIK VISION

HIK VISION DS-2CD812P(N)-IR1(IR3) User manual

HIK VISION

HIK VISION UD21533B-A User manual

Popular IP Camera manuals by other brands

FLIR

FLIR Exx series user manual

Avigilon

Avigilon H4A-BO1-IR installation guide

Digital Watchdog

Digital Watchdog DWCA-C128-64 manual

ShareTech

ShareTech AV1 user manual

Ezviz

Ezviz C6C quick start guide

Melchioni

Melchioni UCAM 2015 manual

Geutebruck

Geutebruck G-Cam/ESD-4630 quick guide

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG installation manual

Mitel

Mitel 6800i Series Administrator's guide

Vitek

Vitek VTC-IR403-212NP quick start guide

THOMSON

THOMSON DSC - 323W user guide

AVer

AVer FB2027 user manual

ENFORCER

ENFORCER EV-T5105-N2SQ manual

Wansview

Wansview NC543 user manual

Eneo

Eneo MCB-64A0003M0A Quick installation guide

deView electronics

deView electronics CBDNI36F instruction manual

Swann

Swann SwannEye user manual

LevelOne

LevelOne IP CamSecure user manual