Hanna Instruments HI 96108 User manual

pHep®+

HI96108

Pocket-Sized

pHMeterwithATC

www.hannainst.com

SPECIFICATIONS

Range 0.0 to 14.0 pH

Resolution 0.1 pH

Accuracy (@20°C) ±0.1 pH

Calibration manual, 2 points

Temperature compensation

automatic, 0 to 50°C (32 to 122°F)

Environment RH 95% max;

0 to 50°C (32 to 122°F)

Batteries 3 x 1.5V alkaline

Life approx. 150 hours of use

Dimensions 150x30x21 mm

(5.9x1.2x0.8")

Weight 70 g (2.5 oz.)

ACCESSORIES

HI 7004M pH 4.01 solution (230 ml)

HI 7007M pH 7.01 solution (230 ml)

HI 7010M pH 10.01 solution (230 ml)

HI 70300M Storage solution (230 ml)

HI 7061M Cleaning solution (230 ml)

Dear Customer,

Thank you for choosing a Hanna product.

If you need additional technical informa-

tion, do not hesitate to e-mail us at

[email protected].

This instrument is in compliance with the

directives.

WARRANTY

This meter is guaranteed for six months against de-

fects in workmanship and materials when used for

its intended purpose and maintained according to in-

structions. This warranty is limited to repair or

replacement free of charge. Damages due to acci-

dent, misuse, tampering or lack of prescribed

maintenance are not covered. If service is required,

contact the dealer from whom you purchased the in-

strument. If under warranty, report the model number,

date of purchase, serial number and the nature of the

failure. If the repair is not covered by the warranty,

you will be notified of the charges incurred. If the

instrument is to be returned to Hanna Instruments,

first obtain a Returned Goods Authorization Number

fromtheCustomerServicedepartmentandthensend

it with shipment costs prepaid. When shipping any

instrument,makesureitisproperlypackagedforcom-

pleteprotection. IST96108 12/04

OPERATION

• Remove the protective cap. Do

not be alarmed if white crystals

appear around the cap. This is

normal with pH electrodes and

they dissolve when rinsed with

water.

• Turn the meter on sliding the

switch on the top.

• Immerse into solution up to

the max immersion level.

• Stir gently and wait until the

display stabilizes.

• After use, rinse the electrode

with water to minimize con-

tamination and store it with a

few drops of storage (HI70300)

or pH 7 (HI 7007) solution in

the protective cap.

DO NOT USE DISTILLED OR DEIONIZED

WATER FOR STORAGE PURPOSES.

• Large fluctuations in readings could be due

to lack of calibration, dry electrode or run-

down batteries.

Recommendations for users

Before using this product, make sure that it is entirely

suitable for the environment in which it is used. Operation

of this instrument in residential areas could cause

interference to radio and TV equipment. The glass bulb

at the end of the pH electrode is sensitive to electrostatic

discharge. Avoid touching this glass bulb at all times. Any

variation introduced by the user to the supplied equipment

may degrade the instrument's EMC performance. To avoid

electrical shock, do not use this instrument when voltages

at the measurement surface exceed 24 Vac or 60 Vdc.

To avoid damage or burns, do not perform any

measurement in microwave ovens.

CALIBRATION

• Immerse the tester up to the maximum

immersion level in pH 7 buffer (HI 7007)

• Allow the reading to

stabilize; using a

small screwdriver

adjust the pH7 cali-

bration trimmer to

• Rinse the electrode with water and

immerse up to the maximum level in

pH4 (HI 7004) or pH10 (HI 7010).

• Allow the reading

to stabilize and

adjust the pH4/10

calibration trim-

mer to read 4.0

(or 10.0).

Calibration is now complete.

ALWAYSUSEFRESHBUFFERSFORCALIBRATION.

BATTERY REPLACEMENT

When the meter cannot be

switched on or the display

fades, pull out the battery com-

partment and replace all three

1.5V batteries, while paying

attention to their polarity.

Batteries should only be re-

placed in a safe area using

the battery type specified in

this instruction manual.

pHep is a registered Trademark of

"Hanna Instruments"

Other Hanna Instruments Measuring Instrument manuals

Hanna Instruments

Hanna Instruments pHep HI 98107 User manual

Hanna Instruments

Hanna Instruments DiST HI 98302 User manual

Hanna Instruments

Hanna Instruments MULTIPARAMETER ION SPECIFIC METERS User manual

Hanna Instruments

Hanna Instruments HI 4421 User manual

Hanna Instruments

Hanna Instruments HI 8915 User manual

Hanna Instruments

Hanna Instruments HI83300 User manual

Hanna Instruments

Hanna Instruments HI 4104 User manual

Hanna Instruments

Hanna Instruments Edge HI 2020 User manual

Hanna Instruments

Hanna Instruments HI 99163 User manual

Hanna Instruments

Hanna Instruments HI 720 User manual

Hanna Instruments

Hanna Instruments HI99162 User manual

Hanna Instruments

Hanna Instruments HI 96759C User manual

Hanna Instruments

Hanna Instruments HI 93714 User manual

Hanna Instruments

Hanna Instruments HI9146-04 User manual

Hanna Instruments

Hanna Instruments HALO 2 HI9810422 User manual

Hanna Instruments

Hanna Instruments HI 98240 User manual

Hanna Instruments

Hanna Instruments HI 253 User manual

Hanna Instruments

Hanna Instruments HI 93706 User manual

Hanna Instruments

Hanna Instruments HI 758 User manual

Hanna Instruments

Hanna Instruments HI96726 User manual

Hanna Instruments

Hanna Instruments GROLINE MONITOR HI981420 User manual

Hanna Instruments

Hanna Instruments HI 255 User manual

Hanna Instruments

Hanna Instruments HI 99181 User manual

Hanna Instruments

Hanna Instruments HI 931100 User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual