Hanna Instruments HI 933300 User manual

Instruction Manual

HI933300

HI933301

Portable Microprocessor

Printing and Logging

Multi-Range

Conductivity Meters

http://www.hannainst.com

These Instruments are in Compliance with the CE Directives

ISO 9000 Certified

Companysince1992

Dear Customer,

Thank you for choosing a Hanna Instruments

Product.

Please read this instruction manual carefully

before using the instrument.

Thismanualwillprovideyouwithalltheneces-

sary information for the correct use of the

instrument, as well as a precise idea of its

versatility in a wide range of applications.

These instruments are in compliance with

directives EN 50081-1 and 50082-1.

TABLE OF CONTENTS

Preliminary Examination............................. 1

General Description ................................... 1

LCD Display Functional Description .......... 3

Functional Description HI 76302W

Conductivity Probe ..................................... 3

Functional Description HI 933300 .............. 4

Functional Description HI 933301 .............. 5

Specifications ............................................. 6

Operational Guide ...................................... 7

Conductivity Calibration............................ 18

Conductivity Versus Temperature Chart.. 26

Temperature Calibration........................... 27

Printing/Recording with HI933301............ 30

Printing/Logging with HI933300 ............... 33

Data Transfer to PC................................. 42

Fault Functions......................................... 44

Memory Organization (HI933300)............ 45

Printer Maintenance ................................. 46

Probe Maintenance .................................. 48

Battery Replacement................................ 49

Accessories.............................................. 50

Warranty................................................... 52

CE Declaration of Conforminty ................ 53

GENERAL DESCRIPTION

The HI933300 and HI933301 are multirange

conductivity meters equipped with printer and

datalogger (HI933300 only).

The measurement interval is user-selectable

from 1 to 180 minutes, and the temperature

coefficient βcan vary from 0.0 to 3.0%/°C.

These microprocessor-based meters provide

automatic calibration with 5 memorized val-

ues:

• 0 µS/cm (µmhoS/cm)

• 84 µS/cm (µmhoS/cm)

• 1413 µS/cm (µmhoS/cm)

• 12880 µS/cm (µmhoS/cm)

• 80000 µS/cm (µmhoS/cm).

This makes the calibration procedure ex-

tremely simple.

HI933300 can also log and directly print the

conductivity and temperature measurements.

PRELIMINARY EXAMINATION

Remove the instrument from the packing ma-

terial and examine it to make sure that no

damage has occurred during shipping. If there

is any damage, notify your Dealer.

Eachprinting/loggingconductivitymeterissup-

pliedcompletewith:

• HI 76302W Conductivity Probe with

1 m(3.3')screenedcable

• AA size Alkaline Batteries (4 pcs)

• Paperroll (10 pcs)

•Ruggedcarryingcase

Note: Save all packing materials until you are

sure that the instrument functions cor-

rectly. All defective items must be re-

turnedintheoriginalpackagingtogether

with the supplied accessories.

The stored data can be retrieved at a later

time for printing or can be transferred to a

computer through an optional HI9200 infrared

transmitter. The HI933300 will transfer the

data in seconds through the infrared lights

with no need for a cable between the trans-

mitter and the meter.

The internal software allocates memory space

to store up to 8,000 readings.

The meters provide automatic temperature

compensation with the supplied HI76302W

4-ring probe with integrated temperature sen-

sor. The sensors in the meter's probe utilize

the latest technology in conductivity mea-

surement.

The four-ring potentiometric method incorpo-

rated into the probe has been proven to pro-

vide higher accuracy than the more common

amperometric method.

HI933300 and HI933301 have a range of 0 to

199900 µS/cm and can be used in any sample

from deionized water to brine.

The probe's stainless steel rings have a large

surface for better response and ease of clean-

ing.

The meters are equipped with an automatic

shut-off system and a 12VDC socket for maxi-

mum versatility in both laboratory and field

use.

Other features include: on-board time and

date, calibration factors stored in Eprom, au-

tomatic low battery alert system.

LCD DISPLAY FUNCTIONAL DESCRIPTION

LO BAT

LOG INTV

1. Primary Display

2. Secondary Display

FUNCTIONAL DESCRIPTION HI 76302W

CONDUCTIVITY PROBE

1. Watertight Shielded Screened Cable

2. Air-Release Holes

3. PVC Protective Sleeve

4. 4 Stainless Steel Rings.

FUNCTIONAL DESCRIPTION HI 933300

MICROPROCESSOR LOGGING

CONDUCTIVITY METER

PAPER

ALT CAL CFM

RANGE TIME LOG

HI 933300

LOG

1. Power adapter plug

2. Conductivity probe socket

3. LCD display

4. PAPER key, to pull the paper and to

reset the printer

5. PRINT key, to obtain a printout

6. ALT key, Alternate Function key

7. RANGE key, to display the conductivity

or the temperature

8. LOG key, to enter the logging mode

9. TIME key, to display present time and

printing interval

10. CFM key, to confirm calibration data

11. CAL key, to enter or exit the calibration

mode.

FUNCTIONAL DESCRIPTION HI 933301

MICROPROCESSOR PRINTING

CONDUCTIVITY METER

ON/OFF

PAPER

ALT CAL CFM

RANGE PRINT RECORD

HI 933301

LOG

1. Power adapter plug

2. Conductivity probe socket

3. LCD display

4. PAPER key, to pull the paper and to

reset the printer

5. ON/OFF key, to turn the meter on or off

6. ALT key, Alternate Function key

7. RANGE key, to display the conductivity

or the temperature

8. RECORD key, to enter the recording mode

9. PRINT key, to obtain a printout

10. CFM key, to confirm calibration data

11. CAL key, to enter or exit the calibration

mode.

SPECIFICATIONS

HI 933300 & HI933301

0.0 to 150.0

150 to 1500

1.50 to 15.00

15.0 to 199.9

0.0 to 60.0

0.1 µS/cm, 1 µS/cm

0.01 mS/cm, 0.1 mS/cm, 0.1°C

±1% full scale; ±0.5°C

excluding probe error

±1% F.S

±0.5°C

Automatic 1, 2, 3, 4 or 5 points

at 0, 84, 1413, 12880,

80000 µS/cm

Automatic from 0 to 60 °C (32 to

140°F) with variable ßfrom 0.0

to 3.0%

HI76302W (included) detach-

able with 4 stainless steel AISI

316 rings and incorporated tem-

perature sensor. Probe length is

120mm (4.8"), diameter is 20mm

(0.8"); screened cable length is

1 meter (3.3')

Low-power impact type-belt, 14

characters per line using 38 mm

plain paper

Selectable from 1, 2, 5, 10, 15,

30, 60, 120, 180 minutes

4 x 1.5 volt AA size.

500 hours with 60' printing

interval. Power socket for

12VDC adapter

0 to 50°C (32 to 122°F), 95%RH

196 x 80 x 57 mm

(7.7 x 3.1x 2.2")

425 g (15 oz.) instrument only

Measurement

Range µS/cm

µS/cm

mS/cm

°C

Resolution

Accuracy

(@20°C/68°F)

Typical EMC

Deviation

Calibration

Temperature

Compensation

Probe

Printer

Printing/Logging

interval

Battery Type

Life

Environment

Dimensions

Weight

OPERATIONAL GUIDE

INITIAL PREPARATION

Each meter is supplied com-

plete with batteries. Remove

the back cover, unwrap the

batteries and install them while

paying attention to their po-

larity.

To prepare the instrument for

use, connect the probe to the

meter securely by aligning the

pins with the socket located

on the top of the instrument,

pushing the plug in and tight-

ening the threaded ring.

Make sure that the sleeve is

properly inserted on the probe,

with the holes towards the top

of the probe (the end nearest

to the cable).

To turn the HI933300 on,

press the RANGE key.

To turn the HI933301 on,

press the ON/OFF key.

The meter will display the clock time as 0:00

and a default sampling interval of 1 minute.

1.5V

SCREW

POTS

RANGE

ON/OFF

TIME

INTV

ON/OFF

RANGE

TIME

ALT

RANGE

CAL

TIME

DATE

To maximize battery life, the display is auto-

matically switched off after 5 minutes of non-

use.

The meter continues to moni-

tor (if in the logging or record-

ing mode) conductivity and

temperature even when the

display is off.

To revive the display, press

either the ON/OFF or the

RANGE key.

SETTING DATE/TIME/PRINTING

INTERVAL (for HI933300 only)

Press the ALT and the TIME keys simulta-

neously. The display will show the date set-

ting. At the bottom of the display the year will

start blinking.

Use the UP or DOWN arrow key to select

the year.

When the correct year is selected, press the

TIME key once. The month will start blinking.

CAL CFM

This manual suits for next models

Table of contents

Other Hanna Instruments Measuring Instrument manuals

Hanna Instruments

Hanna Instruments HI97736 User manual

Hanna Instruments

Hanna Instruments HI 981402 User manual

Hanna Instruments

Hanna Instruments HI 93124 User manual

Hanna Instruments

Hanna Instruments HI96802 User manual

Hanna Instruments

Hanna Instruments HI 9142 User manual

Hanna Instruments

Hanna Instruments HI 5421 User manual

Hanna Instruments

Hanna Instruments HI97721 User manual

Hanna Instruments

Hanna Instruments HI739 User manual

Hanna Instruments

Hanna Instruments HI 713 User manual

Hanna Instruments

Hanna Instruments HI762 User manual

Hanna Instruments

Hanna Instruments HI 96729C User manual

Hanna Instruments

Hanna Instruments HI 83900 User manual

Hanna Instruments

Hanna Instruments pH 211R User manual

Hanna Instruments

Hanna Instruments HI 95721C User manual

Hanna Instruments

Hanna Instruments HI 83200 User manual

Hanna Instruments

Hanna Instruments HI981400 User manual

Hanna Instruments

Hanna Instruments HI 221 User manual

Hanna Instruments

Hanna Instruments HI5321 User manual

Hanna Instruments

Hanna Instruments HI97720 User manual

Hanna Instruments

Hanna Instruments HALO 2 HI9810432 User manual

Hanna Instruments

Hanna Instruments HI 8424 User manual

Hanna Instruments

Hanna Instruments HI84531-02 User manual

Hanna Instruments

Hanna Instruments HI 723 User manual

Hanna Instruments

Hanna Instruments HI 83214 User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual