HAMPTON BAY Glendale 52 User manual

Glendale

52" Ceiling Fan

Owner’s Manual

Glendale

Ventilador de Techo de 52"

Manual del Propietario

Hampton Bay®

Transitional Collection

423-597

442-272

431-552

11289

792145352136 (423-597)

792145352150 (431-552)

792145352143 (442-272)

15-Year Limited Warranty

The retailer warrants the fan motor to be free from defects in workmanship and material

present at time of shipment from the factory for a period of fifteen years after the date of

purchase by the original purchaser. The retailer also warrants that all other fan parts,

excluding any glass or plexiglass blades, to be free from defects in workmanship and

material at the time of shipment from the factory for a period of one year after the date of

purchase by the original purchaser. We agree to correct such defects without charge or at

our option replace with a comparable or superior model if the product is returned to the

retailer. To obtain warranty service, you must present a copy of the receipt as proof of

purchase. All costs of removing and reinstalling the product are your responsibility.

Damage to any part such as by accident or misuse or improper installation or by affixing any

accessories, is not covered by this warranty. Because of varying climatic conditions in the

United States this warranty does not cover any changes in brass finish, including rusting,

pitting, corroding, tarnishing or peeling. Brass finishes of this type give their longest useful

life when protected from varying weather conditions. A certain amount of wobble is normal

and should not be considered a defect. Servicing performed by unauthorized persons shall

render the warranty invalid. There is no other express warranty. The retailer hereby

disclaims any and all warranties, including but not limited to. Those of merchantability

and fitness for a particular purpose to the extent permitted by law. The duration of any

implied warranty which cannot be disclaimed is limited to the time period as specified in

the express warranty. Some states do not allow limitation on how long an implied warranty

lasts, so the above limitation may not apply to you. The retailer shall not be liable for

incidental, consequential, or special damages arising out of or in connection with product

use or performance except as may otherwise be accorded by law. Some states do not allow

the exclusion of incidental or consequential damages, so the above exclusion or limitation

may not apply to you. This warranty gives specific legal rights, and you may also have other

rights which vary from state to state. This warranty supersedes all prior warranties.

15-Year Limited Warranty

Date Purchased

Store Purchased

Model Number

Serial No.

Vendor No.

UPC

Safety Rules.....................................................................................................................................

Unpacking Your Fan ...........................................................................................................................

Installing Your Fan ............................................................................................................................

Installing the Light Kit........................................................................................................................

............................................................................................................................

Care of Your Fan ...............................................................................................................................

Troubleshooting ...............................................................................................................................

Specifications ..................................................................................................................................

Operating Your Fan

10.

11.

12.

13.

Table of Contents

1. Safety Rules

1.To reduce the risk of electric shock, insure electricity has been

turned off at the circuit breaker or fuse box before beginning.

2. All wiring must be in accordance with the National Electrical

Code and local electrical codes. Electrical installation should be

performed by a qualified licensed electrician.

3. WARNING: To reduce the risk of electrical shock and fire, do not

use this fan with any solid-state fan speed control device.

4. WARNING: To reduce the risk of personal injury, use only the two

steel screws (and lock washers) provided with the outlet box for

mounting to the outlet box. Most outlet boxes commonly used for

the support of lighting fixtures are not acceptable for fan support

and may need to be replaced, consult a qualified electrician if in

doubt.

8. Avoid placing objects in the path of the blades.

9. To avoid personal injury or damage to the fan and other items, be

cautious when working around or cleaning the fan.

10. Do not use water or detergents when cleaning the fan or fan

blades. A dry dust cloth or lightly dampened cloth will be

suitable for most cleaning.

11. After making electrical connections, spliced conductors should

be turned upward and pushed carefully up into the outlet box.

The wires should be spread apart with the grounded conductor

and the equipment-grounding conductor on one side of the outlet

box.

12. Electrical diagrams are for reference only. Light kits that are not

packed with the fan must be UL Listed and marked suitable for

use with the model fan you are installing. Switches must be UL

General Use Switches. Refer to the Instructions packaged with

the light kits and switches for proper assembly.

WARNING

TO REDUCE THE RISK OF FIRE,ELECTRIC SHOCK ORPERSONAL

INJURY, MOUNT FAN TO OUTLET BOX MARKED ACCEPTABLE FOR

FAN SUPPORT.

5. The outlet box and support structure must be securely mounted

and capable of reliably supporting a minimum of 50 pounds. Use

only UL Listed outlet boxes marked FOR FAN SUPPORT.

6. The fan must be mounted with a minimum of 7 feet clearance

from the trailing edge of the blades to the floor.

7.Do not operate the reverse switch while the fan blades are in

motion. The fan must be turned off and the blades stopped before

reversing the blades direction.

WARNING

TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE

BLADE ARMS (ALSO REFERRED TO AS BRACKETS) DURING ASSEMBLY

OR AFTER INSTALLATION. DO NOT INSERT OBJECTS IN THE PATH OF

THE BLADES.

NOTE

READ AND SAVE ALL INSTRUCTIONS!

Unpack your fan and check the contents. You should have the following items;

1. Fan blades (5)

2. Canopy assembly

4. Fan motor assembly

5. Blade arms (5)

Ball/downrod assembly

6. Light kit

7. Glass shades

9. Balancing kit

(3)

Pull chain and fobs (2)

10. Loose parts bag containing:

a. Blade attachment hardware

()

b. Mounting hardware

( 3 plastic wire connectors)

16 screws

. Light kit hardware

(1 screw)

WARNING

DO NOT INSTALL OR USE FAN

IF ANY PART IS DAMAGED OR MISSING.

CALL TOLL FREE 1-877-898-1881

Unpacking Your Fan 2.

Tools Required

Phillips screwdriver, straight slot

screwdriver, adjustable wrench, step

ladder, and wire cutters.

Mounting Options

If there isn't an existing UL listed

mounting box, then read the following

instructions. Disconnect the power by

removing fuses or turning off circuit

breakers.

Secure the outlet box directly to the

building structure. Use appropriate

fasteners and building materials. The

outlet box and its support must be able

to fully support the moving weight of the

fan (at least 50 lbs). Do not use plastic

outlet boxes.

Figures 1,2 and 3 are examples of

different ways to mount the outlet box.

Note: You may need a longer downrod to

maintain proper blade clearance when

installing on a steep, sloped ceiling.

To hang your fan where there is an existing

fixture but no ceiling joist, you may need

an installation hanger bar.(Fig.4)

(available at any Home Depot store).

Outlet box

Outletbox

Figure 1

Figure 2

Figure 4

3. Installing Your Fan

Provide strong support

Recessed

outlet box

Mounting bracket

opening must be

toward the top

Figure 3

Angled ceiling

maximum

18 angle

Hanging the Fan

REMEMBER to turn off the power. Follow

the steps below to hang your fan properly.

NOTE: This ceiling fan is supplied with

two types of hanging assemblies; the

standard ceiling installation using the

downrod with ball and socket mounting

and the "close-to-ceiling" installation. The

"close-to-ceiling"installation is

recommended in rooms with less than 8-

foot ceilings or in areas where additional

space is desired from the floor to the fan

blades. When using the standard 4 1/2"

downrod, the distance from the ceiling to

the bottom of the fan blades will be

approximately 12 inches. Once you

have selected which mounting system you

will use, proceed with the following

instructions. Where necessary, each

section of the instructions will note the

different procedures to follow for the two

types of mounting.

1/2

3. Pass the 120-volt supply wires through

the center hole in the ceiling hanger

bracket.

4. Loosen the two screws on the outlet box

in half way.

5. Attach the hanger bracket on the outlet

box by sliding the hanger bracket over

the screws provided with the outlet box.

6. Tighten the two screws on the outlet box

securely.

7. Remove the hanger pin, lock pin and set

screws from the top of the motor

assembly.

8. Route wires exiting from the top of the

fan motor through the canopy ring. Make

sure the slot openings of the canopy ring

are on top. Route the wires through the

canopy and then through the

ball/downrod assembly. (Fig. 6A)

(Fig. 6)

9. Align the holes at the bottom of the

downrod with the holes in the collar on

top of the motor housing (Fig.6A).

Carefully insert the hanger pin through

the holes In the collar and downrod be

careful not to Jam the pin against the

wiring inside the downrod. Insert the

locking pin through the hole in locked

position. (Fig. 6A)

WARNING

FAILURE TO PROPERLY INSTALL

LOCKING PIN AS NOTED IN STEP 9

COULD RESULT IN FAN LOOSENING

AND POSSIBLY FALLING.

10. Tighten two set screws on top of the

fan motor firmly. (Fig. 6A)

11. Place the downrod ball into the hanger

bracket socket.

Figure 5

Ceiling

hanger

bracket

Ceiling

canopy

Screws

Canopy ring

STANDARD CEILING INSTALLATION

1.Remove the canopy ring from the

canopy by turning the ring clockwise

until it unlocks. (Fig. 5)

2. Remove the hanger bracket from the

canopy by loosening the four screws on

the top of the canopy. Remove the two

non-slotted screws and loosen the

slotted screws. This will enable you to

remove the hanger bracket. (Fig. 5)

CLOSE-TO-CEILING INSTALLATION

1. Remove the canopy ring from the canopy by

turning the ring until it unlocks. (Fig.5)

2. Remove the hanger bracket from the canopy by

loosening the four screws on the top of the

canopy. Remove the two non-slotted screws and

loosen the slotted screws. This will enable you

to remove the hangerbracket. (Fig. 5)

4. Pass the 120-volt supply wires through the

center hole in theceiling hanger bracket.

5. Loosen the two screws on theoutlet box halfway.

6. Attach the hanger bracket on the outlet box by

sliding the hanger bracket over the screws

provided with the outletbox.

7. Tighten the two screws on theoutlet box securely.

8. Remove three of the six screws and lock washers

(every other one) from the collar of top motor

(Fig. 7)

9. Route the wires exiting the top of the fan motor

through the canopy ring (make sure the slot

openings of the ring are on top). then proceed to

place the ceiling canopy over the collar at the top

of the motor. Align the mounting holes with the

holes in the motor and fasten using the screws

and lock washers provided (Fig. 7).

10.Tighten the mounting screwssecurely.(Fig. 7)

3. Remove the decorativecanopy bottom cover from

the canopy by depressingthe three studs (Fig.7A)

(Fig. 6)

Mounting

screws

(supplied with

electrical box)

Tab

Ceiling

hanger

bracket

UL Listed

electrical

box

Slide mounting

bracket over

screw heads

Figure 6 120V Wires

Figure 6A

WARNING

FAILURE TO COMPLETELY TIGHTEN

THE THREE SCREWS IN STEP 9 COULD

RESULT IN FAN LOOSENING AND

POSSIBLY FALLING

11.Hang the fan on the tab of the

hanger bracket. Be certain that the

canopy is fully locked into tab as

shown in Fig. 8. This will allow you to

make the electrical connections.

the

Figure 8

Ta b

Figure 7A

Canopy

bottom cover

Screw and

Lockwasher

(3 of 6 places)

Ceiling

Canopy

Figure 7

Canopy

Ring

Collar

Motor wires

Ball/downrod

assembly

Hanger pin Locking

Downrod

Canopy

Canopy cover

Set screws

Making the Electrical

Connections

Remember to disconnect the power.

Follow the steps below to connect the fan to your household

wiring. Use the wire connecting nuts supplied with your fan.

Secure the connectors with electrical tape. Make sure there

are no loose strands or connections.

Step 1 Connect the fan supply (black) wire and light supply

(blue) wire to the black household supply wire as shown in

Figure 9.

Step 2. Connect the neutral fan (white) wire to the white

neutral household wire.

Step 3 Connect the fan ground wire (green) to the household

ground wire.

Step 4 After connecting the wires, spread them apart so that

the green and white wires are on one side of the outlet box

and the black and the blue wires are on the other side.

Step 5 Turn the connecting nuts upward and push the wiring

into the outlet box.

Figures 10 and 11 illustrate the wiring connections for the

optional wall control (available at your Hampton Bay Retailer,

the wire color out of the wall control may vary, see wall

control's installation manual for correct wire connections.)

NOTE

LIGHT KITS ARE AVAILABLE AT YOUR

HAMPTON BAY RETAILER. THE FAN IS

ALREADY WIRED TO SUPPORT THE LIGHT KIT OPTION.

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR OTHER

PERSONAL INJURY. MOUNT FAN ONLY ON AN OUTLET BOX OR

SUPPORTING SYSTEM MARKED ACCEPTABLE FOR FAN SUPPORT.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. DO NOT USE

THIS FAN WITH ANY SOLID-STATE SPEED CONTROL DEVICE.

SUPPLY CIRCUIT

Ground

Conductor

Outlet Box

Green

Ground

Lead

Ground to

Downrod

BLACK

WHITEWHITE

BLACK

BLUE

GREEN

WHITE

BLUE

BLACK WHITE

Figure 9

Diagram indicates optional light kit wiring.

SUPPLY CIRCUIT

Ground

Conductor

Outlet Box

Green

Ground

Lead

Ground to

Downrod

BLACK

WHITE

BLACK

BLUE

GREEN

Figure 10

Diagram indicates optional light kit wiring.

Light Switch

WHITE

BLUE

BLACK WHITE

SUPPLY CIRCUIT

Ground

Conductor

Outlet Box

Green

Ground

Lead

Ground to

Downrod

BLACK

WHITE

BLACK

BLUE

GREEN

Figure 11

Diagram indicates optional light kit wiring.

Light

Fan

WHITE

BLUE

BLACK WHITE

Finishing the

Installation

STANDARD CEILING INSTALLATION

Slide canopy up to the ceiling as shown in

Fig. 12 leaving a 1/8" clearance between the

canopy and the ceiling. Make sure you place

the wires safely into outlet box. Secure

the canopy to the hanger bracket with the four

screws with your fan. Slide the canopy ring

over the canopy and tighten by turning the

ring.

CLOSE-TO-CEILING INSTALLATION

Remove the fan from the tab on the hanger

bracket. Secure the canopy to the hanger

bracket as shown in Fig. 13 with four screws

included with your fan. Slide the canopy ring

over the canopy and tighten by turning the

ring.

the

WARNING

Make sure the notch on the hanging bracket

properly sits in the groove in the hanger ball

before attaching the canopy to the bracket by

turning the housing until it drops into place.

Figure 12

Figure 13

Allow 1/8"

Clearance

Allow 1/8"

Clearance

Remove the blade attachment screws

from the fan motor assembly. Attach and

adjust fan blades according to the

instructions in the following section.

This manual suits for next models

Table of contents

Other HAMPTON BAY Fan manuals

HAMPTON BAY

HAMPTON BAY 132 cm Fan User manual

HAMPTON BAY

HAMPTON BAY 1005 819 968 User manual

HAMPTON BAY

HAMPTON BAY 55370 User manual

HAMPTON BAY

HAMPTON BAY Rapallo User manual

HAMPTON BAY

HAMPTON BAY FANELEE User manual

HAMPTON BAY

HAMPTON BAY METARIE II 24 User manual

HAMPTON BAY

HAMPTON BAY Enchantment 149-155 User manual

HAMPTON BAY

HAMPTON BAY 284-485 User manual

HAMPTON BAY

HAMPTON BAY Edgemont 324-848 User manual

HAMPTON BAY

HAMPTON BAY 553-295 User manual

HAMPTON BAY

HAMPTON BAY Victoria User manual

HAMPTON BAY

HAMPTON BAY Miramar User manual

HAMPTON BAY

HAMPTON BAY Algiers 672 099 User manual

HAMPTON BAY

HAMPTON BAY Farmington User manual

HAMPTON BAY

HAMPTON BAY WDF9-2 User manual

HAMPTON BAY

HAMPTON BAY SAUTERNE AL975-BN User manual

HAMPTON BAY

HAMPTON BAY Windward IV User manual

HAMPTON BAY

HAMPTON BAY Copperhead User manual

HAMPTON BAY

HAMPTON BAY BANNERET YG730-MWH User manual

HAMPTON BAY

HAMPTON BAY 133-715 User manual

HAMPTON BAY

HAMPTON BAY Babiberre User manual

HAMPTON BAY

HAMPTON BAY Vasner User manual

HAMPTON BAY

HAMPTON BAY Campbell II User manual

HAMPTON BAY

HAMPTON BAY CLARKSTON CF544H-PEH User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual