HAMPTON BAY Rapallo User manual

Rapallo

52" Flush Mount Ceiling Fan

Owner’s Manual

Hampton Bay®

Contemporary Collection

Rapallo

Ventilador de Techo con Instalación al Ras de 52"

Manual del Propietario

110-083

792145352006

Date Purchased

Store Purchased

Model No.

Serial No.

Vendor No.

UPC

Hampton Bay Lifetime Limited Warranty

The retailer warrants the fan motor to be free from defects in workmanship and material

present at time of shipment from the factory for a lifetime after the date of purchase by the

original purchaser. The retailer also warrants that all other fan parts, excluding any glass or

plexiglass blades, to be free from defects in workmanship and material at the time of

shipment from the factory for a period of one year after the date of purchase by the original

purchaser. We agree to correct such defects without charge or at our option replace with a

comparable or superior model if the product is returned to the retailer. To obtain warranty

service, you must present a copy of the receipt as proof of purchase. All costs of removing

and reinstalling the product are your responsibility. Damage to any part such as by accident

or misuse or improper installation or by affixing any accessories, is not covered by this

warranty. Because of varying climatic conditions in the United States this warranty does

not cover any changes in brass finish, including rusting, pitting, corroding, tarnishing or

peeling. Brass finishes of this type give their longest useful life when protected from

varying weather conditions. A certain amount of wobble is normal and should not be

considered a defect. Servicing performed by unauthorized persons shall render the warranty

invalid. There is no other express warranty. The retailer hereby disclaims any and all

warranties, including but not limited to. Those of merchantability and fitness for a

particular purpose to the extent permitted by law. The duration of any implied warranty

which cannot be disclaimed is limited to the time period as specified in the express

warranty. Some states do not allow limitation on how long an implied warranty lasts, so the

above limitation may not apply to you. The retailer shall not be liable for incidental,

consequential, or special damages arising out of or in connection with product use or

performance except as may otherwise be accorded by law. Some states do not allow the

exclusion of incidental or consequential damages, so the above exclusion or limitation may

not apply to you. This warranty gives specific legal rights, and you may also have other

rights which vary from state to state. This warranty supersedes all prior warranties.

Lifetime Limited Warranty

11289

Table of Contents

Safety Rules.....................................................................................................................................

Unpacking Your Fan ...........................................................................................................................

Installing Your Fan .............................................................................................................................

Installing the Light Kit........................................................................................................................

.............................................................................................................................

Care of Your Fan ...............................................................................................................................

Troubleshooting ................................................................................................................................

Specifications ...................................................................................................................................

Operating Your Fan

10.

11.

1. Safety Rules

1.To reduce the risk of electric shock, insure electricity has been

turned off at the circuit breaker or fuse box before beginning.

2. All wiring must be in accordance with the National Electrical

Code and local electrical codes. Electrical installation should be

performed by a qualified licensed electrician.

3. WARNING: To reduce the risk of electrical shock and fire, do not

use this fan with any solid-state fan speed control device.

4. WARNING: To reduce the risk of personal injury, use only the two

steel screws (and lock washers) provided with the outlet box for

mounting to the outlet box. Most outlet boxes commonly used for

the support of lighting fixtures are not acceptable for fan support

and may need to be replaced, consult a qualified electrician if in

doubt.

8. Avoid placing objects in the path of the blades.

9. To avoid personal injury or damage to the fan and other items, be

cautious when working around or cleaning the fan.

10. Do not use water or detergents when cleaning the fan or fan

blades. A dry dust cloth or lightly dampened cloth will be

suitable for most cleaning.

11. After making electrical connections, spliced conductors should

be turned upward and pushed carefully up into the outlet box.

The wires should be spread apart with the grounded conductor

and the equipment-grounding conductor on one side of the outlet

box.

12. Electrical diagrams are for reference only. Light kits that are not

packed with the fan must be UL Listed and marked suitable for

use with the model fan you are installing. Switches must be UL

General Use Switches. Refer to the Instructions packaged with

the light kits and switches for proper assembly.

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL

INJURY, MOUNT FAN TO OUTLET BOX MARKED ACCEPTABLE FOR

FAN SUPPORT.

5. The outlet box and support structure must be securely mounted

and capable of reliably supporting a minimum of 50 pounds. Use

only UL Listed outlet boxes marked FOR FAN SUPPORT.

6. The fan must be mounted with a minimum of 7 feet clearance

from the trailing edge of the blades to the floor.

7. Do not operate the reverse switch while the fan blades are in

motion. The fan must be turned off and the blades stopped before

reversing the blades direction.

WARNING

TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE

BLADE ARMS (ALSO REFERRED TO AS BRACKETS) DURING ASSEMBLY

OR AFTER INSTALLATION. DO NOT INSERT OBJECTS IN THE PATH OF

THE BLADES.

NOTE

READ AND SAVE ALL INSTRUCTIONS!

Unpack your fan and check the contents. You should have the following items;

1 Fan blades (3)

2. Mounting bracket

3. Fan motor assembly

4. Motor housing

6. Mounting plate

5. Blade holders (3)

7. Light kit

8. Glass shade

9. Pull chain fobs (2)

11. Balancing kit

10. Extra plug

811

12. Loose parts bag containing:

a. Blade attachment hardware

()

b. Mounting hardware

( 3 plastic wire connectors)

10 screws

WARNING

DO NOT INSTALL OR USE FAN

IF ANY PART IS DAMAGEDOR MISSING.

CALL TOLL FREE 1-877-898-1881 Unpacking Your Fan 2.

Tools Required

Phillips screwdriver, straight slot

screwdriver, adjustable wrench, step

ladder, and wire cutters.

Mounting Options

If there isn't an existing UL listed

mounting box, then read the following

instructions. Disconnect the power by

removing fuses or turning off circuit

breakers.

Secure the outlet box directly to the

building structure. Use appropriate

fasteners and building materials. The

outlet box and its support must be able

to fully support the moving weight of the

fan (at least 50 lbs). Do not use plastic

outlet boxes.

Figures 1 and 2 are examples of different

ways to mount the outlet box.

To hang your fan where there is an existing

fixture but no ceiling joist, you may need

an installation hanger bar.(Fig.3)

(available at any Home Depot store).

Outlet box

Outletbox

Figure 1

Figure 2

Figure 3

3. Installing Your Fan

Hanging the Fan

REMEMBER to turn off the power.

Follow the steps below to hang your fan

properly:

Step 1. Attach the mounting bracket to

the outlet box with two screws and

washers provided with the outlet box.

Make sure the bracket is tight and

secured. (Fig. 4)

Step 2. Lift fan into position by hanging

the motor assembly onto the hook from

the ceiling mounting bracket allowing it

to hang freely. (Fig. 5)

Outlet box

Mounting bracket

Figure 4

Figure 5

Motor

Making the Electrical

Connections

WARNING: To avoid possible electrical

shock, be sure electricity is turned off at

the circuit breaker or main fuse box before

wiring.

Follow the steps below to connect the fan

to your house supply wires. Secure the

wire nuts supplied with your fan by

wrapping the connections with electrical

tape.

Step 1. Connect the Black (hot) wire from

the ceiling to the black and blue wires from

the fan. Connect the white (neutral) wire

from the ceiling to the white wire from the

fan. (Fig. 6)

Step 2. If your outlet box has a ground wire

(green or bare copper) connect the fan and

mounting bracket ground wires to it. If your

outlet box does not have a ground wire,

then connect the fans and mounting

bracket wires together. Secure wire

connection with the plastic wire nuts

provided.

SUPPLY CIRCUIT

Ground

Conductor

Outlet Box

Green

Ground

Lead

Ground to

Fan

BLACK

WHITEWHITE

BLACK

BLUE

GREEN

Figure 6

Diagram indicates optionallight kit wiring.

Finishing the

Installation

Step 1. Move fan into position over the

four mounting studs and secure with the

provided washers and nuts.

Raise the motor housing up

against the mounting bracket, the four

supports inside the housing should be

placed against the four studs on

, twist the housing clockwise until

snug. (Fig. 8)

(Fig. 7)

Step 2.

mounting

bracket

Figure 7

Figure 8

Washers

Nuts

Mounting

studs

Motor

housing

Studs

WHITE

BLUE

BLACK WHITE

Rubber

washer

Blade

arm

Figure 9

Blade

Screws

Attaching the Fan

Blades

Step 1 Attach blades to blade arms using

three screws and rubber washers.

Start a screw into the arm, do not

tighten. Repeat for the 2 remaining

screws and washers.

Step 2 Tighten each screw securely

starting with the center screw. Make sure

the blade is straight.

(Fig. 9)

blade

Repeat steps for the

remaining blades.

Step 3 Fasten the blade arms to the motor

by inserting the tab from the blade arms

to the slot in the bottom motor housing,

then tighten the two screws and washers

already installed in the blade arms. (Fig.

10)

Figure 10

Motor

Blade arm

Slot

Tab

Installing the Mounting

Plate

Step 1. Remove 1 of the 3 screws from the

mounting ring and loosen the other 2 screws.

(Do not remove)

Step 2. Place the key holes on the mounting

plate over the 2 screws previously loosened

from the mounting ring, turn mounting plate

until it locks in place at the narrow section of

the key holes. Secure by tightening the 2

screws previously loosened and the one

previously removed. (Fig. 11)

Figure 11

Mounting plate Mounting ring

Screws

WARNING

TO REDUCE THE RISK OF PERSONAL INJURY,

DO NOT BEND THE BLADE ARMS WHILE

INSTALLING, BALANCING THE BLADES, OR

CLEANING THE FAN. DO NO INSERT FOREIGN

OBJECTS BETWEEN ROTATING FAN BLADES.

Figure 12

7. Installing the Light Kit

Screws

Pull chain

Glass

shade

Bulbs

Light kit

assembly

Glass cap

Metal nut

Decorative nut

Mounting plate

Wire connection

plugs

NOTE: Before starting installation, disconnect the power by turning off the circuit

breaker or removing the fuse at fuse box.

Turning power off using the fan switch is not sufficient to prevent electric shock.

(Fig. 12)

2. Carefully push all wires back into the switch housing, then install the light kit

assembly onto the mounting plate with 3 screws provided. Be sure to tighten all

screws. (Fig. 12)

3. Install 3 x 40W bulbs (not included).

4. Remove the metal nut, glass cap and decorative nut from the light kit. Place

glass shade over the light kit stem, secure with the metal nut (rubber side on

the top), glass cap and decorative nut. Do not overtighten. (Fig. 12)

5. Insert the 2 pull chain through the eyelet in the shade and cap. Secure the

glass cap and decorative nut provided. (Fig. 12)

6. Restore power and your light kit is ready for operation.

Note: Make sure to leave enough space between the fan pull chain and the bulbs

so the chain doesn't rub against any of the bulbs.

While holding the light kit assembly under your fan, snap together the wire

connection plugs.

candelabra

This manual suits for next models

Table of contents

Other HAMPTON BAY Fan manuals

HAMPTON BAY

HAMPTON BAY SAN MARINO 91153 User manual

HAMPTON BAY

HAMPTON BAY HOLLIS 52196 User manual

HAMPTON BAY

HAMPTON BAY AL958-FB User manual

HAMPTON BAY

HAMPTON BAY Springview User manual

HAMPTON BAY

HAMPTON BAY YG115-MWH User manual

HAMPTON BAY

HAMPTON BAY LILLYCREST II User manual

HAMPTON BAY

HAMPTON BAY BPT18-34A-5 User manual

HAMPTON BAY

HAMPTON BAY ASHBURTON YG593-TB User manual

HAMPTON BAY

HAMPTON BAY 52-SKV User manual

HAMPTON BAY

HAMPTON BAY Chamblee User manual

HAMPTON BAY

HAMPTON BAY STONERIDGE 51823 User manual

HAMPTON BAY

HAMPTON BAY SFZ-500-1 User manual

HAMPTON BAY

HAMPTON BAY PALM BEACH III 51499 User manual

HAMPTON BAY

HAMPTON BAY Lynwood User manual

HAMPTON BAY

HAMPTON BAY Palisades User manual

HAMPTON BAY

HAMPTON BAY Pendleton 91252 User manual

HAMPTON BAY

HAMPTON BAY 51315 User manual

HAMPTON BAY

HAMPTON BAY LOWRY 52-LOWRY User manual

HAMPTON BAY

HAMPTON BAY RDB9144-WH User manual

HAMPTON BAY

HAMPTON BAY YG763-BN User manual

HAMPTON BAY

HAMPTON BAY Windward II 523 342 User manual

HAMPTON BAY

HAMPTON BAY Eastridge 640-659 User manual

HAMPTON BAY

HAMPTON BAY AG524I-ORB User manual

HAMPTON BAY

HAMPTON BAY WDF9-2 User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual