HAMPTON BAY Victoria User manual

Victoria by Hampton Bay®

Ceiling Fan by Hampton Bay

Date Purchased

Store Purchased

ETL

Model No.

Serial No.

Vendor No.

UPC

Table of Contents

Safety Rules . . . . . . . . . . . . . . . . . . . . 1

Unpacking Y

our

Fan . . . . . . . . . . . . . . 2

Installing Y

our

Fan . . . . . . . . . . . . . . . 3

Installing the Light Kit. . . . . . . . . . . . . 7

Care of Y

our

Fan . . . . . . . . . . . . . . . . 10

Trouble shooting . . . . . . . . . . . . . . . . . 10

Specifications . . . . . . . . . . . . . . . . . . 11

Warranty Information . . . . . . . . . . . . 12

Thank you for purchasing our ceiling fan. This product has been

manufactured with the highest standards of safety and quality.

70 Victoria

82598

845952000346

CF570ER-BRD

Remote Control Functions . . . . . . . . . . . 8

Safety Rules - Read and Save These Instructions

WARNING

To reduce the risk of electric shock, ensure electricity has been

turned off at the circuit breaker or fuse box before beginning.

All wiring must be in accordance with the National Electrical

Code “ANSI/NFPA 70-1999” and local electrical codes. Electrical

installation should be performed by a qualified licensed

electrician.

WARNING: To reduce the risk of electrical shock or fire, do not

use this fan with any solid-state fan speed control device. It will

permanently damage the electronic circuitry.

CAUTION: To reduce the risk of personal injury, use only the

screws provided with the outlet box.

The outlet box and support structure must be securely mounted and

capable of reliably supporting a minimum of 35 pounds. Use only

UL Listed outlet boxes marked “FOR FAN SUPPORT”.

The fan must be mounted with a minimum of 7 feet clearance from

the trailing edge of the blades to the floor.

Avoid placing objects in path of the blades.

To avoid personal injury or damage to the fan and other items, be

cautious when working around or cleaning the fan.

Do not use water or detergents when cleaning the fan or fan blades.

A dry dust cloth or lightly dampened cloth will be suitable for most

cleaning.

After making electrical connections, spliced conductors should be

turned upward and pushed carefully up into outlet box. The wires

should be spread apart with the grounded conductor and the

equipment-grounding conductor on one side of the outlet box and

ungrounded conductor on the other side of the outlet box.

All set screws must be checked and retightened where necessary

before installation.

10.

11.

TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE

BLADE ARMS (ALSO REFERRED TO AS FLANGES), WHEN

INSTALLING THE BRACKETS, BALANCING THE BLADES OR

CLEANING THE FAN. DO NOT INSERT FOREIGN OBJECTS IN –

BETWEEN ROTATING FAN BLADES.

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL

INJURY, MOUNT FAN TO OUTLET BOX MARKED ACCEPTABLE FOR

FAN SUPPORT WITH THE SCREWS PROVIDED WITH THE OUTLET

BOX.

LIGHT

FAN

OFF

Unpacking Your Fan Unpack your fan and check the contents. You should have the following items:

14A

14B

Fan blades (5)

Blade holders ( 5 )

Mounting bracket (1)

Downrod assembly (1)

Canopy (1)

Canopy cover (1)

Coupling cover (1)

Fan motor assembly (1)

Flywheel (1)

WARNING

DO NOT INSTALL OR USE FAN

IF ANY PART IS DAMAGED OR MISSING.

CALL TOLL FREE 1-877-262-7511

15. Loose parts bag containing:

A. Blade attachment hardware

(16 screws and fiber washers)

B. Blade holder attachment hardware

screws with lock washers (11)

& Motor screws with lock washers (5)

C. Balancing kit (1)

10. Light kit plate(1)

11. Glass shade (1)

12. Light kit (1)

13. Bulbs (3)

14A. Remote control with 12

volt battery (1)

14B. Transmitter holder with

2 mounting screws

and 3 wire nuts(1)

Installing Your Fan

WARNING

Outlet Box

Figure 2

Figure 1

Ceiling

Mounting

Plate

Provide Strong

Support

Recessed

Outlet Box

Figure 3

Figure 4

Tools Required

Mounting Options

Phillips screwdriver, straight slot

screwdriver, step ladder and wire cutters.

If there isn't an existing UL listed mounting

box, then read the following instructions.

Disconnect the power by removing fuses or

turning off circuit breakers.

Secure the outlet box directly to the building

structure. Use appropriate fasteners and

building materials. The outlet box and its

support must be able to fully support the

moving weight of the fan (at least 35 lbs). Do

not use plastic outlet boxes.

TO REDUCE THE RISK OF FIRE, ELECTRIC

SHOCK OR PERSONAL INJURY, MOUNT FAN

ONLY TO AN OUTLET BOX MARKED ACCEPT-

AB L E F OR FA N S U PPORT AN D U S E T H E

MOUNTING SCREWS PROVIDED WITH THE

OUTLET BOX. OUTLET BOX COMMONLY USED

FOR THE SUPPORT OF LIGHTING FIXTURE MAY

NOT BE ACCEPTABLE FOR FAN SUPPORT AND

MAY NEED TO BE REPLACED. CONSULT A

QUALIFIED ELECTRICIAN IF IN DOUBT.

Figures 1~3 are examples of different ways to

mount the outlet box.

To hang your fan where there is an existing

fixture but no ceiling joist, you may need an

installation hanger bar as shown in Figure 4

(available at any Home Depot store).

Note: You may need a longer downrod to

maintain proper blade clearance when

installing on a steep, sloped ceiling. The

maximum angle allowable is 18°. If the

canopy touches downrod, remove the

decorative canopy bottom cover and turn the

canopy 180° before attaching the canopy to

the mounting plate.

Figure 10

Registration

slot

Figure 9

Lead Wires

Ball/downrod

Assembly

Canopy

Lock Pin

Couping cover

Canopy cover

Hitch Pin

Tighten

Screws

Firmly

Hanging the Fan

REMEMBER to turn off the power. Follow the

steps below to hang your fan properly:

Remove hanger ball

from downrod assembly by loosening set screw,

removing the cross pin, and sliding ball off rod.

(Figure 7)

4. Carefully feed fan wires up through the

downrod. (Figure 8) Thread the rod into the

coupling. Next, line up holes and replace lock

pin and hitch pin. Tighten set screws.

5. Slip coupling cover, canopy cover and

canopy onto downrod. (Figure 9) Carefully

reinstall hanger ball onto downrod, make sure

that cross pin is in correct position, set screws

are tighten and wires are not twisted.

Secure the mounting bracket to the

ceiling outlet box with the screws and

washers provided with your outlet box.

(Figure 5)

2. Loosen the two set screws from the

motor assembly. (Figure 6)

Remove the hitch pin and lock pin from

the downrod assembly.

6. Now lift motor assembly into position and place

hanger ball into mounting bracket. Rotate until the

check groove

should not rotate

if this is done correctly.

drops into the registration slot and

seats firmly. (Figure 10) Downrod

Figure 6

Downrod

Supply

wires

Figure 8

Figure 5

Cross pin

Hanger

ball

Downrod

Figure 7

Outlet box

Mounting bracket

Hitch pin Lock pin

Set

screws

Set screw

Making the Electrical

Connections

Remember

Follow the steps below to connect the fan to

your household wiring. Use the wire nuts

supplied with your fan. Secure the

connectors with electrical tape. Make sure

there are no loose strands or connections.

to shut off the power.

1. Connect the fan supply (black) wire to the

black ceiling supply wire. (Figure 11)

2. Connect the neutral fan (white) wire t o

the w hite neutral wire from the ceiling .

(Figure 11)

3. Connect the fan ground wire (green) and

the mounting bracket ground wire (green) to

the ground wire . (Figure

11)

4. After connecting the wires, spread them

apart so that the green and white wires are

on one side of the outlet box and the black

wires is on the other side.

from the ceiling

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC

SHOCK, OR OTHER PERSONAL INJURY.

MOUNT FAN ONLY ON AN OUTLET BOX OR

SUPPORTING SYSTEM MARKED

ACCEPTABLE FOR FAN SUPPORT.

SUPPLY CIRCUIT

Ground

Conductor

Outlet Box

Green

Ground

Lead

Ground to

Downrod

BLACK

WHITEWHITE

BLACK

GREEN

WHITE

BLACK WHITE

Figure 11

Diagram indicates optional light kit wiring.

BLACK

Finishing the Installation

1. Tuck connections neatly into ceiling outlet box.

2.Remove one screw from the mounting bracket

and loosen the other screw around 1/4″.

3. Align the canopy up to ceiling and over the

loose screw. Place the canopy into key hole and

rotate canopy clockwise. (Figure 12)

4. Secure the canopy by using previous removed

screw and loosened screws.

5. Place the canopy cover to the canopy and

rotate canopy cover clockwise until it is locked

into right

position.(Figure 12)

MAKE SURE TAB AT BOTTOM OF HANGER BRACKET

IS PROPERLY SEATED IN GROOVE OF HANGER BALL

BEFORE

ATTACHING CANOPY TO BRACKET. FAILURE TO

PROPERLY SEAT TAB IN GROOVE COULD CAUSE

DAMAGE TO ELECTRICAL WIRING.

WARNING

Figure 12

Outlet box

Mounting

bracket

Canopy

Screw

Canopy

cover

Lead Wires

Ball/Downrod

Assembly

The following procedure should correct most

fan wobble issues. Check after each step.

1. Check that all blades and blade holder

screws are secure.

2. Most fan wobble problems are caused

when blade levels are unequal. Check this

level by selecting a point on the ceiling above

the tip of one of the blades. Measure this

distance as shown in Figure 16. Rotate the fan

unti l the next blade is posi tioned for

measurement. Repeat for each blade. The

distance should be equal within 1/8".

If all blade levels are not equal, you can

adjust the blade level with the following

procedure.

3. Use the enclosed Blade Balancing Kit if the

blade wobble is still noticeable. (Please refer

to the introduction provide in the blade

balancing kit, which is individually packed.)

4. If the blade wobble is still noticeable,

interchanging two adjacent (side by side)

blades can redistribute the weight and

possibly result in smoother operation.

Figure 16

Touching

ceiling

Figure 14

A t t a c h i n g t h e F a n

Blades

1. Attach the fan blades to the blade

holders by using three screws and fiber

washers as shown in Figure 13. Start a

screw into the blade holder, do not

tighten. Repeat for the 2 remaining

screws and washers.

2. Tighten each screw securely starting

with the center screw.

3. Fasten the blade assemblies to fly

wheel with the blade holder attachement

hardware(B) provided. (Figure 14)

4. Loose five PCS motor screws on the

motor, Place the slot holes of the fly

wh eel o ver f ive scre ws pr evi ou sly

loosened and attach five motor screws

provided in Loose parts bag, tighten all

screws. (Figure 15)

Figure 13

Blade holder

Blade

Screws

paper

Washer

Figure 15

Screws B

Flywheel

4. Place key holes on the light kit over the 2

screws previously loosened from the light kit

plate, turn light kit until it locks in place at the

narrow setion of the key holes. Secure by

tightening 2 screws previously loosened and

the one previously removed.(Figure 18)

5. Place the 3 bulbs (60 Watt, included) into

the light kit.(Figure 19)

6. Remove the rubber washer, metal nut, metal

cap and finial from the light kit assembly.

Place glass shade over the light kit stem,

secure with the rubber washer, metal nut,

metal cap and finial previously removed. Do

not over tighten.(Figure 19)

7. Restore power and your light kit is

ready for operations.

Installing the Light Kit

CAUTION　To Reduce The Risk Of Electric

Shock, Disconnect The Electrical Supply

Circuit To The Fan Before Installing Light

Kit.

REMEMBER The fan blades must already

be attached to the fan.

Your fan and light kit though pre-wired have

been disassembled at the factory to ease in

shipping. Please follow these steps to

complete the installation of your fan and

light. TO REDUCE THE RISK OF FIRE

D O N O T E X C E E D M A X I M U M

WATTAGE RATING.

1. Remove 1 of 3 screws from the mounting

ring and loosen the other 2 screws(Do not

remove).(Figure 17)

2. Place key holes on the light kit plate over the

2 sc rews pr evi ously l oos ene d f rom the

mounting ring, turn light kit plate until it locks

in place at the narrow setion of the key holes.

Secure by tightening 2 screws previously

l o o s e n e d a n d t h e o n e p r e v i o u s l y

removed.(Figure 17)

3. Remove 1 of 3 screws from the light kit plate

and loosened the other 2 screws(Do not

remove). Connect white wire from motor to

white wire from light kit. Connect black wire

from motor to black wire from light kit.(Figure

18)

Figure 18

Figure 19Figure 17

Screw

Light kit plate

Mounting ring

Light kit

White

wire

Black

wire

Screw

Metal Nut

Finial

Metal Cap

Rubber Washer

Glass shade

Light kit

Bulb

Light kit

plate

This manual suits for next models

Table of contents

Other HAMPTON BAY Fan manuals

HAMPTON BAY

HAMPTON BAY Colonial Bamboo User manual

HAMPTON BAY

HAMPTON BAY YG098B-NM User manual

HAMPTON BAY

HAMPTON BAY BANNERET YG730-MWH User manual

HAMPTON BAY

HAMPTON BAY Tipton II 52" User manual

HAMPTON BAY

HAMPTON BAY Mercer 52 inch User manual

HAMPTON BAY

HAMPTON BAY 178 128 User manual

HAMPTON BAY

HAMPTON BAY AK408H-BN User manual

HAMPTON BAY

HAMPTON BAY SUSSEX II AL694LED-BN User manual

HAMPTON BAY

HAMPTON BAY Copperhead 184-860 User manual

HAMPTON BAY

HAMPTON BAY 52202 User manual

HAMPTON BAY

HAMPTON BAY MONTGOMERY RDB91-WH User manual

HAMPTON BAY

HAMPTON BAY TX-604D User manual

HAMPTON BAY

HAMPTON BAY SINCLAIR 798-072 User manual

HAMPTON BAY

HAMPTON BAY Winfield User manual

HAMPTON BAY

HAMPTON BAY ALTURA 52356 User manual

HAMPTON BAY

HAMPTON BAY Devereaux II User manual

HAMPTON BAY

HAMPTON BAY Bercello Estates II User manual

HAMPTON BAY

HAMPTON BAY BPT18-34ALE-2 User manual

HAMPTON BAY

HAMPTON BAY LDS-BF3001 User manual

HAMPTON BAY

HAMPTON BAY SINCLAIR User manual

HAMPTON BAY

HAMPTON BAY 54" Tropics User manual

HAMPTON BAY

HAMPTON BAY Burgess 176015 User manual

HAMPTON BAY

HAMPTON BAY Torrington User manual

HAMPTON BAY

HAMPTON BAY YG763-BN User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual