GeoVision GV-IPCAM User manual

Quick Start Guide

GV-IPCam

Before attempting to connect or operate this product,

please read these instructions carefully and save this manual for future use.

Fixed IP Dome

Target Fixed Dome

ICH265HISIV119-A

Motorized IP Dome

Under the copyright laws, this manual may not be copied, in whole or in

part, without the written consent of GeoVision.

Every effort has been made to ensure that the information in this manual is

accurate. GeoVision, Inc. makes no expressed or implied warranty of any

kind and assumes no responsibility for errors or omissions. No liability is

assumed for incidental or consequential damages arising from the use of

the information or products contained herein. Features and specifications

are subject to change without notice. Note: no memory card slot or local

storage function for Argentina.

GeoVision, Inc.

9F, No. 246, Sec. 1, Neihu Rd.,

Neihu District, Taipei, Taiwan

Tel: +886-2-8797-8377

Fax: +886-2-8797-8335

http://www.geovision.com.tw

Trademarks used in this manual: GeoVision, the GeoVision logo and GV

series products are trademarks of GeoVision, Inc. Windows is the

registered trademark of Microsoft Corporation.

February 2019

Contents

Caution.............................................................................. iv

Safety Notice .................................................................... iv

Options .............................................................................. v

Creating GV-IP Camera’s Login Credentials................. vi

Note for Adjusting Focus and Zoom............................. vii

Chapter 1 Introduction ......................................................1

Target Fixed Dome..........................................................................1

Motorized IP Dome..........................................................................2

1.1 Packing List ..............................................................................3

1.2 Overview ..................................................................................4

1.3 Installation ................................................................................6

1.4 Connecting the Camera............................................................9

1.5 I/O Terminal Block ..................................................................10

1.5.1 Pin Assignment..........................................................10

1.6 Loading Factory Default..........................................................11

1.6.1 Using the Web Interface.............................................11

1.6.2 Directly on the Camera ..............................................12

Chapter 2 Accessing the Camera..................................13

2.1 System Requirement...............................................................13

2.2 Accessing the Live View .........................................................13

2.2.1 Checking the Dynamic IP Address .............................14

iii

2.2.2 Configuring the IP Address ........................................15

2.3 Adjusting Image Clarity...........................................................17

Chapter 3 The Web Interface .........................................19

Chapter 4 Upgrading System Firmware ........................22

Caution

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions.

Safety Notice

The GV-IPCAM uses a Lithium battery as the power supply for its internal

real-time clock (RTC). The battery should not be replaced unless required!

If the battery does need replacing, please observe the following:

Danger of Explosion if battery is incorrectly replaced

Replace only with the same or equivalent battery, as recommended by

the manufacturer

Dispose of used batteries according to the manufacturer's instructions

Options

Optional devices can expand your camera’s capabilities and versatility.

Contact your dealer for more information.

Device Description

Power Adapter

The power adapter is available for all Fixed IP Dome

Camera. Contact your sales representative for the

countries and areas supported.

GV-PA191 PoE

Adapter

The GV-PA191 PoE adapter is designed to provide

power and network connection to the cameras over

a single Ethernet cable.

GV-POE Switch

The GV-POE Switch is designed to provide power

along with network connection for IP devices. The

GV-POE Switch is available in various models with

different numbers and types of ports.

GV-Mount

Accessories

The GV-Mount Accessories provide a

comprehensive lineup of accessories for installation

on ceiling, wall corner and pole. For details, see GV-

Mount Accessories Installation Guide.

GV-Relay V2

The GV-Relay V2 is designed to expand the voltage

load of GV IP devices. It provides 4 relay outputs,

and each can be set as normally open (NO) or

normally closed (NC) independently as per your

requirement.

GV-Relay V2 does not support GV-EFD2101 / 3101

/ 5101.

Smoked Cover

The smoked cover is an IK7, tinted camera cover

designed for GV-Fixed IP Dome to conceal the

direction of the camera lens.

Creating GV-IP Camera’s Login

Credentials

The default Administrator and Guest accounts are no longer supported by

GV-IPCAM H.265 series firmware V1.14 or later. When purchasing a

new camera or performing factory resetting, you need to set up a login

username and password for the camera.

1. Download and install GV-IP Device Utility from the company

website.

2. On the GV-IP Device Utility window, click to search for your GV-

IP camera.

3. Double-click your GV-IP camera in the GV-IP Device Utility list. This

dialog box appears.

4. Click the Change Username and Password tab to type a new

username and password. Note that the new password must meet

the password strength requirements.

5. Optionally click Upgrade all devices to use the same username

and password on all other devices.

vii

Note for Adjusting Focus and Zoom

When adjusting the Focus and Zoom Screws, do not over tighten the

Focus and Zoom screws. The screws only need to be as tight as your

finger can do it. It is not necessary to use any tools to get them tighter.

Doing so can damage the structure of lens.

For example,

Focus Screw

Zoom Screw

Fixed IP Camera

The maximum torque value for all the zoom and focus screws is 0.049 N.m

Introduction

Chapter 1 Introduction

Target Fixed Dome

The Target Fixed Dome (GV-EFD) is an indoor, fixed network camera

equipped with an automatic IR-cut filter and IR LEDs for day and night

surveillance. Adjustable in 3 axis (pan, tilt and rotate), it offers an entry-

level surveillance solution with all the essential features and excellent

image quality..

Model No. Specifications Description

GV-EFD2101 Varifocal

Lens

P-Iris, f: 3 ~ 9 mm,

F/1.7, 1/2.8” Ø14

mm Mount

2 MP, H.264, Super

Low Lux, WDR

GV-EFD3101 Varifocal

Lens

P-Iris, f: 3 ~ 9 mm,

F/1.7, 1/2.8” Ø14

mm Mount

3 MP, H.264, Super

Low Lux, WDR Pro

GV-EFD5101 Varifocal

Lens

P-Iris, f: 3 ~ 9 mm,

F/1.7, 1/2.7” Ø14

mm Mount

5 MP, H.264, Low

Lux, WDR

Motorized IP Dome

GV-MD8710-FD is a motorized IP camera specifically designed for face

detection. The camera is equipped with a WDR Pro, an automatic IR-cut

filter and IR LEDs for day and night surveillance. With its motorized

varifocal lens, the user can zoom and focus the camera from the Web

interface. The camera can support H.265 video codec to achieve better

compression ratio while maintaining high quality pictures at reduced

network bandwidths. For night operations, the camera allows up to 30 m

(98.4 ft) IR effective distance. Adjustable in 3 axis (pan, tilt and rotate), it

offers smart surveillance solutions with all the essential features and

excellent image quality.

Model No. Specifications Description

GV-MD8710-FD

Motorized

Varifocal

Lens

P-Iris, f: 4 ~ 8 mm,

F/1.44, 1/2.5” Ø14

mm Mount

8 MP, H.265,

Low Lux, WDR

Pro

Other manuals for GV-IPCAM

This manual suits for next models

Table of contents

Other GeoVision IP Camera manuals

GeoVision

GeoVision GV-IRCAM 10M EIA AC24V User manual

GeoVision

GeoVision GV-PPTZ7300 User manual

GeoVision

GeoVision GV-PTZ010D User manual

GeoVision

GeoVision GV-OPAL S1 User manual

GeoVision

GeoVision GV-EBD2702: GV-EBD4700 User manual

GeoVision

GeoVision GV-FD220D User manual

GeoVision

GeoVision GV-ABL Series User manual

GeoVision

GeoVision GV-BX2400-0F Use and care manual

GeoVision

GeoVision GV-BX120D series User manual

GeoVision

GeoVision GV-BX2400-1F User manual

GeoVision

GeoVision ICH264TG2V10 User manual

GeoVision

GeoVision GV-BX1500-1F User manual

GeoVision

GeoVision GV-MFD120 User manual

GeoVision

GeoVision GV-LPR1200 User manual

GeoVision

GeoVision GV-Fisheye GV-FE110 User manual

GeoVision

GeoVision GV-CBW120 User manual

GeoVision

GeoVision GV-BX120D series User manual

GeoVision

GeoVision GV-BX2400-0F User manual

GeoVision

GeoVision GV-Fisheye GV-FE2301 User manual

GeoVision

GeoVision GV-Fisheye GV-FE2301 User manual

GeoVision

GeoVision GV-FD2410 User manual

GeoVision

GeoVision GV-SD220 Series User manual

GeoVision

GeoVision GV-Fisheye SERIES User manual

GeoVision

GeoVision GV-BX130D-0 User manual

Popular IP Camera manuals by other brands

FLIR

FLIR Exx series user manual

Avigilon

Avigilon H4A-BO1-IR installation guide

Digital Watchdog

Digital Watchdog DWCA-C128-64 manual

ShareTech

ShareTech AV1 user manual

Ezviz

Ezviz C6C quick start guide

Melchioni

Melchioni UCAM 2015 manual

Geutebruck

Geutebruck G-Cam/ESD-4630 quick guide

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG installation manual

Mitel

Mitel 6800i Series Administrator's guide

Vitek

Vitek VTC-IR403-212NP quick start guide

THOMSON

THOMSON DSC - 323W user guide

AVer

AVer FB2027 user manual

ENFORCER

ENFORCER EV-T5105-N2SQ manual

Wansview

Wansview NC543 user manual

Eneo

Eneo MCB-64A0003M0A Quick installation guide

deView electronics

deView electronics CBDNI36F instruction manual

Swann

Swann SwannEye user manual

LevelOne

LevelOne IP CamSecure user manual