General DTH04 User manual
2
KEY FEATURES
• riple readout shows time, inside or outside
temperature, and inside or outside relative humidity
(RH)
• Stores and recalls Min and Max temp and RH
readings
• Warm, Comfortable and Cool indications
• °C/°F switch on back
• 12/24 hour alarm clock with 10 minute snooze
option
• Includes flip-out stand, 9.8 ft. (3m) probe and
batteries
3
SETUP INSTRUCTIONS
Insta Batteries:
1. Slide off cover of battery compartment on back of unit.
2. Install (2) included “AAA” batteries in compartment
in correct position.
3. Replace battery compartment cover.
OPERATING INSTRUCTIONS
ON/OFF:
1. Press
ON/OFF
button once to power on the meter
and press again to power it off. “
WARM
”,
“
COMFORT
” or “
COOL
” appears at specific
combination of temperature and humidity.
°C/°F:
1. Press
°C/°F
button to select desired temperature
unit.
Max/Min:
1. Press
MAX/MIN
button once to recall maximum
temperature and humidity readings.
MAX
will appear
on the display.
2. Press button again to recall minimum temperature
and humidity readings.
MIN
will appear on the
display.
3. Unit reverts to real time mode automatically after
5 seconds.
Time Set:
1. Press and hold
TIME SET
button for 3 seconds.
Blinking digits on bottom readout means clock is in
set mode.
4
2. Press
HR
and
MIN
buttons until the display shows
the current time.
3. Press
12/24
button to select time format.
4. Press
TIME SET
button to save setting and return
to real time mode. If button is not pressed within
5 seconds, unit will not save new setting and will
return to real time mode using previous setting.
In/Out:
1. Press
IN/OUT
button once to display outdoor
measurements.
OUT
will appear on the display.
2. Press button again to display indoor measurements.
IN
will will appear on the display.
A arm Set:
1. Press and hold
AL/SNZ
button for 3 seconds to enter
alarm set mode.
AL
will appear on the display.
2. Press
HR
and
MIN
buttons until display shows
desired alarm time.
3. Press
TIME SET
button again to save alarm setting
and return to real time mode. If button is not
pressed within 3 seconds, unit will not save new
alarm setting and will return to real time mode.
Snooze Set:
1. After setting alarm time, press
AL/SNZ
button to
activate the alarm and snooze function. and
SNZ
signs will appear on the
display
.
2. After alarm/snooze function is activated, the unit will
automatically return to real time mode in 3 seconds.
5
3. When the set alarm time is reached, will flash
and alarm will sound for 1 minute. Press any key to
silence the alarm.
4. 10 minutes after the alarm sounds,
SNZ
will flash
and the alarm will sound 5 times. Press any key to
silence the alarm.
5. o clear the snooze function, press and hold the
AL/SNZ
button for 3 seconds to enter alarm set
mode. hen press the
AL/SNZ
button again.
he and
SNZ
indications will disappear.
SPECIFICATIONS
•emperature Measurement Range:
-32° to 122°F (0° to 50°C)
•emperature Measurement Accuracy:
±1.8°F (±1°C)
•RH Measurement Range: 20 to 100%
•RH Measurement Accuracy: ±6% of reading
•emperature & RH Resolutions:
0.1° (F or C), 0.1% RH
•Digit Height: 0.67 in.
•Display Window Size: 2.8 x 2.4 in. (71 x 61mm)
•Dimensions: 3.9 x 4.1 x 0.9 in. (99 x 104 x 23mm)
•Power Source: 2 “AAA” batteries (included)
Table of contents
Other General Measuring Instrument manuals
General
General DIGITAL POCKET WEATHERMAN SAM700BAR User manual
General
General MMD900 User manual
General
General DCFM700 User manual
General
General DSM403SD User manual
General
General LD7 User manual
General
General EMF1394DL User manual
General
General MMD5NP User manual
General
General MM80G User manual
General
General SAF-T-LITE I.S. 300 Guide
General
General MM9 User manual
General
General MMD7003 User manual
General
General DSM8930 User manual
General
General MMH800 User manual
General
General UV512C User manual
General
General VOC08 User manual
General
General DT4208SD User manual
General
General TOOLSMART TS02 User manual
General
General MMD900 User manual
General
General CM660 User manual
General
General MM8 User manual
