Focal Point F820804 Programming manual

ASSEMBLY & INSTALLATION INSTRUCTIONS

Please note : Except where otherwise stated, all rights, including copy-

right in the text, images and layout of this booklet is owned by Focal

Point Fires Ltd.You are not permitted to copy or adapt any of the con-

tent without the prior written permission of Focal Point Fires Ltd.

All instructions must be handed to the user for

safekeeping.

Revision B- 09/21

MODELS COVERED BY THESE INSTRUCTIONS

F820804 MICHIGAN OAK FIRE SURROUND

.FoFocal Point Fires Ltd

Christchurch, Dorset BH23 2BT

Tel: 01202 49933499330

Fax: 01202 499326

www.focalpointfires.co.uk

e : [email protected]

Focal Point Fires Ltd

RBK House, Irishtown, Athlone,

Co. Westmeath, N37 XP52,

Ireland Tel: 01202 499330

Fax: 01202 499326

www.focalpointfires.co.uk

e: [email protected]

ASSEMBL Y INSTRUCTIONS

GB IE

1.0 IMPORTANT NOTES

Section

1.0

2.0

3.0

4.0

5.0

6.0

7.0

Contents

Important notes

Tools required

Hardware & parts list

Assembly

Installation

Cleaning/ finishing

Guarantee - terms and conditions

Page No.

4.0 Assembly3

5.0 Installation 5

2.0 TOOLS REQUIRED

3.0 HARDWARE & PARTS LIST

To ensure safe and stable installation:

1.The assembled Fire Surround must be fixed / secured to wall.

2.The wall must be sturdy and in good repair.

3. Some walls require alternative fixings (not included).

4.When drilling into the wall, check for hidden pipes and cables.

5.There are two options for construction of this surround.

A - with rebates - If you are installing this surround with a gas fire, or an electric fire where there is space in the wall to recess

the fire, this means the laminate / marble is up against the wall.

B - with out rebates - If using this surround with an electric fire and a flat wall you will need to remove the rebates, instead use

the spacer frame from the fire.

Cross head screwdriver PZ2 (3 inches in length or greater)

Drill, 6mm and a 2mm suitable drill bit

Pencil

Tape measure

Fixings

4.0 ASSEMBLY

GB IE

Fixings

A x 4 PCS

D x 4 PCS

STEP 1

Fixings

A x 6PCS

D x 9PCS

Using a drop of glue (I) in each dowel hole, insert 2x dowels (A) in to the left side panel (6). Again, using a drop of glue

(I) in the dowel holes take the inside leg (5) and push them on to the dowels of the left side panel (6). Use 3x wood

screws (D) to screw the inside leg (5) to the left side panel (6). Repeat the process to secure the other two inside legs

(5) to the right side panel (7) and front panel (2).

Gently lay both legs you have prepared onto a suitable protected surface. Be extremely careful not to scratch the front edges of

the legs. DO NOT DRAG THE LEGS! Make sure that the legs are lifted everytime they are moved to avoid them from being

damaged.

Using a drop of glue (I) in each dowel hole, insert two dowels (A) in to the left side panel (6). Again, using a drop of glue (I)

in the dowel holes take the front panel (2) and push them on to the dowels (A). Use 2x wood screws (D) to screw the parts

together. Repeat the process for the right side panel (7) and front panel (2).

STEP 2

Fixings

4.0 ASSEMBLY

GB IE

Fixings

A x 4 PCS

Fixings

A x 4 PCS

Bx 5PCS

STEP 3

If using option A only. If rebates are not being used go to section 5.

Use the glue (I) in the dowel holes before inserting 2x dowels (A) into the left and right hand legs (3 and 4). Position the cam

bolts (C) in to left and right side panels (6and 7).

Take the left side and the rgiht side panels (6and 7), put some glue (I) in to the dowel holes. Insert the cam locks (B). Screw

the cam bolts (C) in the legs (6and 7). Now turn the cam locks (B) clockwise to lock the parts together.

4.0 ASSEMBLY

Insert 5x cam locks (B) and glue (I) 4x dowels (A) into the legs and front panel (2,3&4). Next prepare the top panel (1) by screwing

all 5x cam bolts (C) into position. The dowel joints (A) need to be glued in at both ends of the top panel. Connect the top panel to

the surround, making sure all 9x inserts are in the correct position. Once home, all 5x cam locks (B) can be tightened into position.

STEP 4

B x 6 PCS

C x 6 PCS

C x 5 PCS

②

③

④

⑥

⑤

⑦

②⑤

Fixings

Ex 2PCS

Fx 4 PCS

With a pencil mark out the desired height where you would like the mirror brackets (H) to be situated on the rear of the legs.

To avoid splitting the leg, pre drill the bracket holes with a 2mm drill bit. Now attach the brackets to the legs using the 3x12mm screws

(F). Once the brackets are in position, centre and level the hearth into its final fitting position. Position the surround on the hearth to

correspond with the header/ fireplace lintel, mark with a pencil on the wall where you wish to drill. Remove the surround and prepare t

he wall from the marked positions. If using the fixings supplied, drill a hole in the wall using a 6mm drill bit. If not, use a suitable drill bit

for the wall plugs you are using. Insert the wall plugs (G) into position. Offering the surround back up into position against the wall, you

are now able to secure the surround to the wall using the 4x30mm screws (E).

F861604

As our policy is one of continuous improvement and development, we hope therefore you understand we must retain the right to amend details and/or specifications without prior notice.

Before carrying out any of the following operations, ensure that the appliance is OFF and completely cold. Regularly clean

around the appliance to ensure that dust, fluff, pet hair etc, are kept to a minimum.There are no other specific requirements for

care, other than regular cleaning of the general appliance.

A wipe with a dry cloth is normally sufficient. DO NOT use abrasive cleaners as they can damage the finish.Test on a hidden

part before cleaning. Clean only in the direction of the grain. Regularly check the surround is securely fixed in position.

7.0 GUARANTEE - TERMS AND CONDITIONS

The 3 year guarantee commences from the date of purchase, provided that the terms and conditions are adhered to:

Registration is not required.

1. For any claim to be made within the 3 years from date of purchase you will be required to provide and supply us with your

proof of purchase.

Making a claim is easy.

If you wish to make a claim under our 3 year guarantee and all the terms and conditions for your product have been met then

please submit the following information for the attention of the 3G Service Department to the address below.Alternatively, you

can email or fax. Please note that this does not affect your statutory rights.

Focal Point Fires Ltd, 3G Service Department, Reid Street, Christchurch, Dorset, BH23 2BT.

Alternatively email: 3g@focalpointfires.co.uk or fax. 01202 499326.

Details required:

1. Name, full address including post code and contact telephone number.

2. Receipt of purchase or credit card statement.

6.0 CLEANING/ FINISHING GB IE

5.0 INSTALLATION GB IE

G x 2 PCS

H x 2 PCS

Table of contents

Other Focal Point Indoor Fireplace manuals

Focal Point

Focal Point Stone User manual

Focal Point

Focal Point MALMESBURY LED ELECTRIC SUITE Assembly Instructions

Focal Point

Focal Point P23 EBONY NG - F500229 Assembly Instructions

Focal Point

Focal Point Wickes User manual

Focal Point

Focal Point Fireglo Slimline User guide

Focal Point

Focal Point ExcelsiorRadiant MAN User manual

Focal Point

Focal Point HORIZON Guide

Focal Point

Focal Point POLARIS User manual

Focal Point

Focal Point KENSINGTON REALITY User manual

Focal Point

Focal Point LYCIA Assembly Instructions

Focal Point

Focal Point NERO CUBE LCD Assembly Instructions

Focal Point

Focal Point BLENHEIM HE Assembly Instructions

Focal Point

Focal Point L23 CHESHIRE Guide

Focal Point

Focal Point ATHERSTONE SLATE ELECTRIC SUITE Assembly Instructions

Focal Point

Focal Point blenhein multiflue Assembly Instructions

Focal Point

Focal Point elysee radiant Assembly Instructions

Focal Point

Focal Point F500115 User manual

Focal Point

Focal Point Blenheim Multiflue Assembly Instructions

Focal Point

Focal Point REFLECTION Guide

Focal Point

Focal Point PI27 BLENHEIM Assembly Instructions

Focal Point

Focal Point ALVOR Assembly Instructions

Focal Point

Focal Point L30 PIANO NG Assembly Instructions

Focal Point

Focal Point Ebony LED Electric Fire Assembly Instructions

Focal Point

Focal Point EBONY ELECTRIC Assembly Instructions

Popular Indoor Fireplace manuals by other brands

Brigantia

Brigantia 35-DVRS31N-2 User's installation, operation and maintenance manual

Nordpeis

Nordpeis Bergen Installation and user manual

Superior

Superior BCT2536TMN Installation and operation instructions

Quadra-Fire

Quadra-Fire 5100I-GD-B owner's manual

Renaissance

Renaissance RUMFORD 1000 user manual

Lacunza

Lacunza IV-800 Instruction book

Baxi

Baxi 940 Installer and owner guide

Dru

Dru Maestro 60/2 Tall RCH installation manual

Diamond Fireglass

Diamond Fireglass SS-O22 General assembly, installation, and operation instructions

HearthStone

HearthStone Windsor Bay 8830 Owner's manual and installation guide

Napoleon

Napoleon ASCENT B42 quick start guide

Enviro

Enviro E33GI owner's manual

Smeg

Smeg L30 FABE Installation & user's instructions

KEDDY

KEDDY K700 Installation instructions care and firing instructions

Godin

Godin 3451 manual

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Installation and operation instructions

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 operating manual

Desa

Desa CCFPDFT Owner's operating & installation manual