Fluke MICROSCANNER User manual
MICROTOOLS
MICROSCANNER PRO™
MICROSCANNER
TM
MICROSCANNER
TM
PRO
User Guide - ENGLISH
Manuel Utilisateur - FRANÇAIS
Benutzer Handbuch - DEUTSCH
Manuale per l'utente - ITALIANO
Guía del Usuario - ESPAÑOL
Manual do Utilizador - PORTUGUÊS
2947-4508-01Rev.01 11/2001
©2001 FlukeNetworks, Inc.All rightsreserved. Printedin USA.
Allproduct namesaretrademarks oftheir respective companies.
MICROSCANNER
ENGLISH - 1
MICROSCANNER
TM
MICROSCANNER
TM
PRO
User Guide
ENGLISH
MICROSCANNER
ENGLISH - 2
MICROSCANNER
ENGLISH - 3
Table of Contents
The Keypad ..........................................................4
Operating Mode ....................................................4
Calibration Mode ..................................................4
Setting the NVP percentage.................................5
Changing Display from Meters to Feet ................6
Battery ..................................................................6
High Voltage Protection........................................6
Technical Support .................................................7
Product Versions ..................................................7
MICROSCANNER Tests ......................................8
Wiremap...........................................................8
Patch Cable Wiremap ..............................10
Length ............................................................ 11
Network Link Indicator
(MICROSCANNER PRO).........................12
Pair Length ...............................................14
Coaxial Cabling
(MICROSCANNER PRO).........................15
Office Identifier...............................................16
Office Identifier
(MICROSCANNER PRO).........................17
Toner ..................................................................18
Technical Specifications .....................................19
MICROSCANNER
ENGLISH - 4
The Keypad
When turned on, MICROSCANNER will flash the
LCD power-up test and then resume the test
mode that was last executed. MICROSCANNER
will turn off automatically when no cable is
detected and no key has been used for 10
minutes.
Press ▲ ▼ to quickly change pairs or adjust
values. The ▲ ▼ keys are only active if the
indicators are shown on the display
Operating Mode
Press MODE to select the desired test. The
available modes are: WIREMAP - OFFICE
IDENTIFIER - LENGTH - TONER
Calibration Mode
+
Turn the MICROSCANNER OFF, then hold the
MODE key down while pressing the ON key to
start 'Calibrate' mode. Use MICROSCANNER to
calibrate cable lengths of more than 50 feet (15
meters) and up to 1500 feet (457 meters.)
MICROSCANNER
ENGLISH - 5
Setting the NVP percentage
Once in Calibrate Mode, the default NVP
(Nominal Velocity of Propagation) will be
displayed followed by the overall cable length. The
cable length is measured with the currently stored
NVP.
NVP is the measure of how fast a signal travels
down a cable compared to the speed of light. The
result will be represented as a percentage of the
speed of light. For an accurate length test, the
NVP must be set correctly.
If you know a cable's NVP, change the displayed
numbers using the ▲▼ keys until the appropriate
NVP is displayed. The cable length will automati-
cally adjust to the new NVP.
If you know a cable's length, change the shown
NVP using the ▲▼ keys until the appropriate
length is displayed. The NVP can be adjusted in
1% increments, and the length changes accord-
ingly.
Cables used for calibration must be at least 50
feet (15 meters) long. Cable lengths of less than
50 feet will display FAULT.
MICROSCANNER
ENGLISH - 6
Changing Display from Meters to Feet
During Calibration you will be able to switch the
displayed length from meters to feet by simply
pressing the MODE key.
Press the ON/OFF key once the desired cable
length or NVP is displayed to terminate 'Calibrate'
mode and store the new calibration factor.
MICROSCANNER will use it for future length
measurements until another calibration is
performed.
Battery
MICROSCANNER requires a 9 Volt Alkaline
battery. The Battery icon is displayed on the
screen when MICROSCANNER detects a low
battery condition.
Using MICROSCANNER with a low battery may
effect the test accuracy.
If MICROSCANNER is stored for more than one
month, the battery should be removed.
Note: MICROSCANNER will not function properly
with a 9 Volt Carbon Battery.
High Voltage Protection
MICROSCANNER is designed to withstand input
voltage conditions that arise from normal
telephony applications such as 48 VDC at less
than 80 ma or 24 VAC used to power many
keysets. Tests cannot be performed when hazard
conditions exist on the inputs.
MICROSCANNER
ENGLISH - 7
Technical Support
If you have technical questions, you may contact
Fluke Networks' Technical Support by phone, fax
or e-mail.
US: 1-888-99-FLUKE (1-888-993-5853)
Canada: 1-800-363-5853
Europe: +31-402-675-200
Beijing: 86 (10) 6512-3435
Japan: +81-3-3434-0181
Singapore: +65-738-5655
Anywhere in the world: +1-425-446-4519
Before calling Technical Support, please have
your Hardware and Software Version numbers
available.
For new product information: World Wide Web
page at www.flukenetworks.com
ProductVersions
+ +
Turn the MICROSCANNER OFF, then hold the ▲
and MODE keys down while pressing the ON key
to display your hardware and software versions.
Hardware Software
This manual suits for next models
1
Table of contents
Languages:
Other Fluke Measuring Instrument manuals
Fluke
Fluke 1520 Use and care manual
Fluke
Fluke 30 Operating and installation instructions
Fluke
Fluke PG7607 User manual
Fluke
Fluke 6100A User manual
Fluke
Fluke CertiFiber Pro User manual
Fluke
Fluke iFlex i2500-18 Reference guide
Fluke
Fluke 3140R User manual
Fluke
Fluke 393 Use and care manual
Fluke
Fluke 93 User manual
Fluke
Fluke 712 User manual
Fluke
Fluke 481-DESI Instruction manual
Fluke
Fluke 190 Series II User manual
Fluke
Fluke 9142 User manual
Fluke
Fluke 871A Operating instructions
Fluke
Fluke 1773 Use and care manual
Fluke
Fluke 345 Instruction manual
Fluke
Fluke 712 Use and care manual
Fluke
Fluke Datapaq Furnace Tracker User manual
Fluke
Fluke ScopeMeter 123 User manual
Fluke
Fluke Biomedical MPS450 Operators User manual
